[U-Boot] [U-Boot, v3, 12/12] arm, spl, at91: add spl support for the corvus board
Andreas Bießmann
andreas.devel at googlemail.com
Mon Nov 17 13:16:50 CET 2014
Dear Heiko Schocher,
Heiko Schocher <hs at denx.de> writes:
>replaces the at91bootstrap code with SPL code.
>make the spl image with:
>./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin
>
>this writes the length of the spl image into the 6th
>execption vector. This is needed from the ROM bootloader.
>
>Signed-off-by: Heiko Schocher <hs at denx.de>
>Reviewed-by: Bo Shen <voice.shen at atmel.com>
>Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>---
>
>Changes in v3:
>add Reviewed-by from Bo Shen
>
>Changes in v2:
>- rename function "nand_erase_one" to "spl_nand_erase_one" as
> Scott Wood suggested
>- add comment from Andreas Biessmann:
> rename "MPDDRC_CR_EBISHARE" to "MPDDRC_CR_DQMS_SHARED"
>
> arch/arm/Kconfig | 1 +
> board/siemens/corvus/board.c | 109 ++++++++++++++++++++++++++++++++++++++-----
> configs/corvus_defconfig | 5 +-
> include/configs/corvus.h | 54 +++++++++++++++++++--
> 4 files changed, 151 insertions(+), 18 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bießmann
More information about the U-Boot
mailing list