[U-Boot] [U-Boot, v3, 11/12] arm, at91, spl: add spl support for the taurus board

[Andreas Bießmann]

Dear Heiko Schocher,

Heiko Schocher <hs at denx.de> writes:
>replaces the at91bootstrap code with SPL code.
>
>make the spl image with:
>./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin
>
>this writes the length of the spl image into the 6th
>execption vector. This is needed from the ROM bootloader.
>
>Signed-off-by: Heiko Schocher <hs at denx.de>
>Reviewed-by: Bo Shen <voice.shen at atmel.com>
>---
>
>Changes in v3:
>add comment from Bo Shen:
>- make matrix_init weak, and add it in taurs board code
>- add Reviewed-by from Bo Shen
>
>Changes in v2:
>- rename function "nand_erase_one" to "spl_nand_erase_one" as
>  Scott Wood suggested
>
> arch/arm/Kconfig              |  1 +
> board/siemens/taurus/taurus.c | 82 +++++++++++++++++++++++++++++++++++++------
> configs/taurus_defconfig      |  5 +--
> include/configs/taurus.h      | 52 ++++++++++++++++++++++++++-
> 4 files changed, 127 insertions(+), 13 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann