[U-Boot] [PATCH 7/8] imx: add configuration file for SPL
John Tobias
john.tobias.ph at gmail.com
Fri Nov 7 23:12:54 CET 2014
This file is the default DCD configuration file for SPL
---
board/freescale/mx6sabresd/mx6sabresd_spl.cfg | 54 +++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 board/freescale/mx6sabresd/mx6sabresd_spl.cfg
diff --git a/board/freescale/mx6sabresd/mx6sabresd_spl.cfg b/board/freescale/mx6sabresd/mx6sabresd_spl.cfg
new file mode 100644
index 0000000..2e2f850
--- /dev/null
+++ b/board/freescale/mx6sabresd/mx6sabresd_spl.cfg
@@ -0,0 +1,54 @@
+/*
+ * Maintainer : Richard Hu <linuxfae at technexion.com>
+ *
+ * Derived from Nitrogen6x code by Boundary Devices
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* set the default clock gate to save power */
+DATA 4 0x020C4068 0x00C03F3F /* CCM_CCGR0 */
+DATA 4 0x020C406c 0x0030FC03 /* CCM_CCGR1 */
+DATA 4 0x020C4070 0x0FFFC000 /* CCM_CCGR2 */
+DATA 4 0x020C4074 0x3FF00000 /* CCM_CCGR3 */
+DATA 4 0x020C4078 0xFFF300 /* CCM_CCGR4 */
+DATA 4 0x020C407c 0x0F0000F3 /* CCM_CCGR5 - enable SATA clocks */
+DATA 4 0x020C4080 0x000003FF /* CCM_CCGR6 - enable ushdc and usb clocks */
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF /* IOMUXC_GPR4 */
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F /* IOMUXC_GPR6 */
+DATA 4 0x020e001c 0x007F007F /* IOMUXC_GPR7 */
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4 0x020c4060 0x000000fb /* CCM_CCOSR */
+
+
--
1.9.1
More information about the U-Boot
mailing list