[U-Boot] [PATCH 2/5] sata: implement reset_sata for dwc_ahsata

[Nikita Kiryanov]

Add reset_sata() to the sata driver interface and implement it
for dwc_ahsata. This function cleans up after sata_init(), and
therefore accepts a device number like sata_init() does.
A dummy implementation is provided for the rest of the drivers.

Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/armv7/omap-common/sata.c |  5 +++++
 drivers/block/ata_piix.c              |  5 +++++
 drivers/block/dwc_ahsata.c            | 21 +++++++++++++++++++++
 drivers/block/fsl_sata.c              |  5 +++++
 drivers/block/pata_bfin.c             |  5 +++++
 drivers/block/sata_dwc.c              |  5 +++++
 drivers/block/sata_sil.c              |  5 +++++
 drivers/block/sata_sil3114.c          |  5 +++++
 include/sata.h                        |  1 +
 9 files changed, 57 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c
index 3b4dd3f..a24baa1 100644
--- a/arch/arm/cpu/armv7/omap-common/sata.c
+++ b/arch/arm/cpu/armv7/omap-common/sata.c
@@ -74,6 +74,11 @@ int init_sata(int dev)
 	return ret;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 /* On OMAP platforms SATA provides the SCSI subsystem */
 void scsi_init(void)
 {
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 5cf91ad..3042684 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -192,6 +192,11 @@ int init_sata(int dev)
 	return 0;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 static inline u8 sata_inb(unsigned long ioaddr)
 {
 	return inb(ioaddr);
diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
index c68fd2f..9a2b547 100644
--- a/drivers/block/dwc_ahsata.c
+++ b/drivers/block/dwc_ahsata.c
@@ -592,6 +592,27 @@ int init_sata(int dev)
 	return 0;
 }
 
+int reset_sata(int dev)
+{
+	struct ahci_probe_ent *probe_ent =
+			(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+	struct sata_host_regs *host_mmio =
+			(struct sata_host_regs *)probe_ent->mmio_base;
+
+	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
+		printf("The sata index %d is out of ranges\n\r", dev);
+		return -1;
+	}
+
+	setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
+	while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
+		udelay(100);
+
+	disable_sata_clock();
+
+	return 0;
+}
+
 static void dwc_ahsata_print_info(int dev)
 {
 	block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index ebd6261..71d7cec 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -255,6 +255,11 @@ int init_sata(int dev)
 	return 0;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
 {
 	printf("\n\rSATA:           %08x\n\r", (u32)reg);
diff --git a/drivers/block/pata_bfin.c b/drivers/block/pata_bfin.c
index b7fd1cd..c2673bd 100644
--- a/drivers/block/pata_bfin.c
+++ b/drivers/block/pata_bfin.c
@@ -1009,6 +1009,11 @@ int init_sata(int dev)
 	return res;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 /* Read up to 255 sectors
  *
  * Returns sectors read
diff --git a/drivers/block/sata_dwc.c b/drivers/block/sata_dwc.c
index efca5ea..9e8b067 100644
--- a/drivers/block/sata_dwc.c
+++ b/drivers/block/sata_dwc.c
@@ -423,6 +423,11 @@ int init_sata(int dev)
 	return rc;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 static u8 ata_check_altstatus(struct ata_port *ap)
 {
 	u8 val = 0;
diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c
index 1f510cd..ea7d76a 100644
--- a/drivers/block/sata_sil.c
+++ b/drivers/block/sata_sil.c
@@ -571,6 +571,11 @@ int init_sata(int dev)
 	return 0;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 /*
  * SATA interface between low level driver and command layer
  */
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 3aa6fc9..61ffb66 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -702,6 +702,11 @@ int init_sata (int dev)
 	return res;
 }
 
+int reset_sata(int dev)
+{
+	return 0;
+}
+
 /* Check if device is connected to port */
 int sata_bus_probe (int portno)
 {
diff --git a/include/sata.h b/include/sata.h
index 38f4b4a..c2bbe1a 100644
--- a/include/sata.h
+++ b/include/sata.h
@@ -3,6 +3,7 @@
 #include <part.h>
 
 int init_sata(int dev);
+int reset_sata(int dev);
 int scan_sata(int dev);
 ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer);
 ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer);
-- 
1.9.1