[U-Boot] [PATCH 2/2] sunxi: Add sunxi_get_sid helper function
Hans de Goede
hdegoede at redhat.com
Wed Nov 26 13:36:30 CET 2014
On sun6i the SID is stored in the pmic, rather then in the SoC itself,
add a helper function to abstract this away.
This makes our MAC address generation code also work on sun6i.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/cpu_info.c | 19 +++++++++++++++++++
arch/arm/include/asm/arch-sunxi/cpu.h | 1 +
board/sunxi/board.c | 24 +++++++++++-------------
3 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index 5146dc4..7a3a4ca 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -10,6 +10,7 @@
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
+#include <axp221.h>
#ifdef CONFIG_MACH_SUN6I
int sunxi_get_ss_bonding_id(void)
@@ -72,3 +73,21 @@ int print_cpuinfo(void)
return 0;
}
#endif
+
+int sunxi_get_sid(unsigned int *sid)
+{
+#ifdef CONFIG_MACH_SUN6I
+#ifdef CONFIG_AXP221_POWER
+ return axp221_get_sid(sid);
+#else
+ return -ENODEV;
+#endif
+#else
+ int i;
+
+ for (i = 0; i< 4; i++)
+ sid[i] = readl(SUNXI_SID_BASE + 4 * i);
+
+ return 0;
+#endif
+}
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
index 8aeed2f..9500262 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -147,6 +147,7 @@
void sunxi_board_init(void);
void sunxi_reset(void);
int sunxi_get_ss_bonding_id(void);
+int sunxi_get_sid(unsigned int *sid);
#endif /* __ASSEMBLY__ */
#endif /* _CPU_H */
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 4c1c69a..b5dfe95 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -217,22 +217,20 @@ void sunxi_board_init(void)
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
- if (!getenv("ethaddr")) {
- uint32_t reg_val = readl(SUNXI_SID_BASE);
+ unsigned int sid[4];
- if (reg_val) {
- uint8_t mac_addr[6];
+ if (!getenv("ethaddr") && sunxi_get_sid(sid) == 0 &&
+ sid[0] != 0 && sid[3] != 0) {
+ uint8_t mac_addr[6];
- mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
- mac_addr[1] = (reg_val >> 0) & 0xff;
- reg_val = readl(SUNXI_SID_BASE + 0x0c);
- mac_addr[2] = (reg_val >> 24) & 0xff;
- mac_addr[3] = (reg_val >> 16) & 0xff;
- mac_addr[4] = (reg_val >> 8) & 0xff;
- mac_addr[5] = (reg_val >> 0) & 0xff;
+ mac_addr[0] = 0x02; /* Non OUI / registered MAC address */
+ mac_addr[1] = (sid[0] >> 0) & 0xff;
+ mac_addr[2] = (sid[3] >> 24) & 0xff;
+ mac_addr[3] = (sid[3] >> 16) & 0xff;
+ mac_addr[4] = (sid[3] >> 8) & 0xff;
+ mac_addr[5] = (sid[3] >> 0) & 0xff;
- eth_setenv_enetaddr("ethaddr", mac_addr);
- }
+ eth_setenv_enetaddr("ethaddr", mac_addr);
}
return 0;
--
2.1.0
More information about the U-Boot
mailing list