[U-Boot] [PATCH 13/39] x86: Use the standard dram_init() function

[Simon Glass]

Instead of having an x86-specific DRAM init function, adjust things so we
can use the normal one.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/coreboot/sdram.c     | 11 ++++-------
 arch/x86/include/asm/u-boot-x86.h |  4 ++--
 common/board_f.c                  |  6 +-----
 3 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c
index 959feaa..ca651c7 100644
--- a/arch/x86/cpu/coreboot/sdram.c
+++ b/arch/x86/cpu/coreboot/sdram.c
@@ -11,6 +11,7 @@
 #include <asm/e820.h>
 #include <asm/u-boot-x86.h>
 #include <asm/global_data.h>
+#include <asm/init_helpers.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
 #include <asm/arch/sysinfo.h>
@@ -79,7 +80,7 @@ ulong board_get_usable_ram_top(ulong total_size)
 	return (ulong)dest_addr;
 }
 
-int dram_init_f(void)
+int dram_init(void)
 {
 	int i;
 	phys_size_t ram_size = 0;
@@ -94,7 +95,8 @@ int dram_init_f(void)
 	gd->ram_size = ram_size;
 	if (ram_size == 0)
 		return -1;
-	return 0;
+
+	return calculate_relocation_address();
 }
 
 int dram_init_banksize(void)
@@ -116,8 +118,3 @@ int dram_init_banksize(void)
 	}
 	return 0;
 }
-
-int dram_init(void)
-{
-	return dram_init_banksize();
-}
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index 9e525dd..89618c7 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -27,8 +27,8 @@ unsigned long get_tbclk_mhz(void);
 void timer_set_base(uint64_t base);
 int pcat_timer_init(void);
 
-/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */
-int dram_init_f(void);
+/* Architecture specific DRAM init */
+int dram_init(void);
 
 /* cpu/.../interrupts.c */
 int cpu_init_interrupts(void);
diff --git a/common/board_f.c b/common/board_f.c
index 31f1d5c..df02ca5 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -903,13 +903,9 @@ static init_fnc_t init_sequence_f[] = {
 #if defined(CONFIG_HARD_SPI)
 	init_func_spi,
 #endif
-#ifdef CONFIG_X86
-	dram_init_f,		/* configure available RAM banks */
-	calculate_relocation_address,
-#endif
 	announce_dram_init,
 	/* TODO: unify all these dram functions? */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
 	dram_init,		/* configure available RAM banks */
 #endif
 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
-- 
2.1.0.rc2.206.gedb03e5