[U-Boot] [PATCH v5 3/3] sunxi: video: Add simplefb support

Simon Glass sjg at chromium.org
Thu Nov 20 18:40:03 CET 2014


Hi Hans,

On 19 November 2014 13:32, Hans de Goede <hdegoede at redhat.com> wrote:
> From: Luc Verhaegen <libv at skynet.be>
>
> Add simplefb support, note this depends on the kernel having support for
> the clocks property which has recently been added to the simplefb devicetree
> binding.
>
> Signed-off-by: Luc Verhaegen <libv at skynet.be>
> [hdegoede at redhat.com: Use pre-populated simplefb node under /chosen as
>  disussed on the devicetree list]
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  arch/arm/include/asm/arch-sunxi/display.h |  4 +++
>  board/sunxi/board.c                       | 11 ++++++++
>  drivers/video/sunxi_display.c             | 42 +++++++++++++++++++++++++++++++
>  include/configs/sunxi-common.h            |  8 ++++++
>  4 files changed, 65 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h
> index 8d80ceb..c9d81ba 100644
> --- a/arch/arm/include/asm/arch-sunxi/display.h
> +++ b/arch/arm/include/asm/arch-sunxi/display.h
> @@ -195,4 +195,8 @@ struct sunxi_hdmi_reg {
>  #define SUNXI_HDMI_PLL_DBG0_PLL3               (0 << 21)
>  #define SUNXI_HDMI_PLL_DBG0_PLL7               (1 << 21)
>
> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
> +int sunxi_simplefb_setup(void *blob);
> +#endif

Do you really need this #ifdef?

> +
>  #endif /* _SUNXI_DISPLAY_H */
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index e6ec5b8..d4530e8 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -24,6 +24,7 @@
>  #endif
>  #include <asm/arch/clock.h>
>  #include <asm/arch/cpu.h>
> +#include <asm/arch/display.h>
>  #include <asm/arch/dram.h>
>  #include <asm/arch/gpio.h>
>  #include <asm/arch/mmc.h>
> @@ -237,3 +238,13 @@ int misc_init_r(void)
>         return 0;
>  }
>  #endif
> +
> +#ifdef CONFIG_OF_BOARD_SETUP
> +void
> +ft_board_setup(void *blob, bd_t *bd)

void on same line? Also can you make it return int. You could look at
u-boot-fdt/next (I am waiting on resolving one patch before sending a
pull).

> +{
> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
> +       sunxi_simplefb_setup(blob);
> +#endif
> +}
> +#endif /* CONFIG_OF_BOARD_SETUP */
> diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
> index 3f46c31..2f3f5db 100644
> --- a/drivers/video/sunxi_display.c
> +++ b/drivers/video/sunxi_display.c
> @@ -13,6 +13,8 @@
>  #include <asm/arch/display.h>
>  #include <asm/global_data.h>
>  #include <asm/io.h>
> +#include <fdtdec.h>
> +#include <fdt_support.h>
>  #include <linux/fb.h>
>  #include <video_fb.h>
>
> @@ -416,3 +418,43 @@ video_hw_init(void)
>
>         return graphic_device;
>  }
> +
> +/*
> + * Simplefb support.
> + */
> +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
> +int
> +sunxi_simplefb_setup(void *blob)

int on same line

> +{
> +       static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
> +       int offset, ret;
> +
> +       if (!sunxi_display.enabled)
> +               return 0;
> +
> +       /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */
> +       offset = fdt_node_offset_by_compatible(blob, -1,
> +                                              "allwinner,simple-framebuffer");
> +       while (offset >= 0) {
> +               ret = fdt_find_string(blob, offset, "allwinner,pipeline",
> +                                     "de_be0-lcd0-hdmi");
> +               if (ret == 0)
> +                       break;
> +               offset = fdt_node_offset_by_compatible(blob, offset,
> +                                              "allwinner,simple-framebuffer");
> +       }

Can you use do...while() to avoid repeating the 'offset =' line?

> +       if (offset < 0) {
> +               eprintf("Cannot setup simplefb: node not found\n");
> +               return 0; /* Keep older kernels working */
> +       }
> +
> +       ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base,
> +                       graphic_device->winSizeX, graphic_device->winSizeY,
> +                       graphic_device->winSizeX * graphic_device->gdfBytesPP,
> +                       "x8r8g8b8");
> +       if (ret)
> +               eprintf("Cannot setup simplefb: Error setting properties\n");
> +
> +       return ret;
> +}
> +#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 900ef52..d5d907b 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -204,6 +204,9 @@
>   */
>  #define CONFIG_SUNXI_FB_SIZE (8 << 20)
>
> +/* Do we want to initialize a simple FB? */
> +#define CONFIG_VIDEO_DT_SIMPLEFB
> +
>  #define CONFIG_VIDEO_SUNXI
>
>  #define CONFIG_CFB_CONSOLE
> @@ -217,6 +220,11 @@
>
>  #define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
>
> +/* To be able to hook simplefb into dt */
> +#ifdef CONFIG_VIDEO_DT_SIMPLEFB
> +#define CONFIG_OF_BOARD_SETUP
> +#endif
> +
>  #endif /* CONFIG_VIDEO */
>
>  /* Ethernet support */
> --
> 2.1.0
>

Regards,
Simon


More information about the U-Boot mailing list