[U-Boot] [PATCH 20/39] x86: Emit post codes in startup code
Simon Glass
sjg at chromium.org
Thu Nov 6 21:20:12 CET 2014
On x86 it is common to use 'post codes' which are 8-bit hex values emitted
from the code and visible to the user. Traditionally two 7-segment displays
were made available on the motherboard to show the last post code that was
emitted. This allows diagnosis of a boot problem since it is possible to
see where the code got to before it died.
On modern hardware these codes are not normally visible. On Chromebooks
they are displayed by the Embedded Controller (EC), so it is useful to emit
them. We must enable this feature for the EC to see the codes, so add an
option for this.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/x86/cpu/coreboot/coreboot.c | 3 ++-
arch/x86/cpu/start.S | 25 +++++++++++++++++++++++++
arch/x86/include/asm/post.h | 32 ++++++++++++++++++++++++++++++++
board/google/chromebook_link/Kconfig | 4 ++++
4 files changed, 63 insertions(+), 1 deletion(-)
create mode 100644 arch/x86/include/asm/post.h
diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c
index 257faa1..cc7398f 100644
--- a/arch/x86/cpu/coreboot/coreboot.c
+++ b/arch/x86/cpu/coreboot/coreboot.c
@@ -15,6 +15,7 @@
#include <asm/cache.h>
#include <asm/cpu.h>
#include <asm/io.h>
+#include <asm/post.h>
#include <asm/arch-coreboot/tables.h>
#include <asm/arch-coreboot/sysinfo.h>
#include <asm/arch/timestamp.h>
@@ -68,7 +69,7 @@ void show_boot_progress(int val)
gd->arch.tsc_prev = now;
}
#endif
- outb(val, 0x80);
+ outb(val, POST_PORT);
}
int last_stage_init(void)
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 7f41475..f62ffeb 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -13,6 +13,7 @@
#include <config.h>
#include <version.h>
#include <asm/global_data.h>
+#include <asm/post.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <generated/generic-asm-offsets.h>
@@ -60,6 +61,28 @@ _start:
movw %ax, %es
movw %ax, %ss
+ /* Enable post codes to EC */
+#ifdef CONFIG_EARLY_POST_CROS_EC
+ mov $0x1b, %ecx
+ rdmsr
+ and $0x100, %eax
+ test %eax, %eax
+ je 2f
+
+ mov $0x8000f8f0, %eax
+ mov $0xcf8, %dx
+ out %eax, (%dx)
+ mov $0xfed1c001, %eax
+ mov $0xcfc, %dx
+ out %eax, (%dx)
+ mov $0xfed1f410, %esp
+ mov (%esp), %eax
+ and $0xfffffffb, %eax
+ mov %eax, (%esp)
+2:
+#endif
+ post_code(POST_START)
+
/* Clear the interrupt vectors */
lidt blank_idt_ptr
@@ -91,6 +114,7 @@ car_init_ret:
/* Align global data to 16-byte boundary */
andl $0xfffffff0, %esp
+ post_code(POST_START_STACK)
/* Zero the global data since it won't happen later */
xorl %eax, %eax
@@ -126,6 +150,7 @@ car_init_ret:
call setup_gdt
/* Set parameter to board_init_f() to boot flags */
+ post_code(POST_START_DONE)
xorl %eax, %eax
/* Enter, U-boot! */
diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h
new file mode 100644
index 0000000..3371185
--- /dev/null
+++ b/arch/x86/include/asm/post.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _post_h
+#define _post_h
+
+/* port to use for post codes */
+#define POST_PORT 0x80
+
+/* post codes which represent various stages of init */
+#define POST_START 0x1e
+#define POST_CAR_START 0x1f
+
+#define POST_START_STACK 0x29
+#define POST_START_DONE 0x2a
+
+/* Output a post code using al - value must be 0 to 0xff */
+#ifdef __ASSEMBLY__
+#define post_code(value) \
+ movb $value, %al; \
+ outb %al, $POST_PORT
+#else
+static inline void post_code(int code)
+{
+ outb(code, POST_PORT);
+}
+#endif
+
+#endif
diff --git a/board/google/chromebook_link/Kconfig b/board/google/chromebook_link/Kconfig
index 975d557..9c715ba 100644
--- a/board/google/chromebook_link/Kconfig
+++ b/board/google/chromebook_link/Kconfig
@@ -12,4 +12,8 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "chromebook_link"
+config EARLY_POST_CROS_EC
+ bool "Enable early post to Chrome OS EC"
+ default y
+
endif
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list