[U-Boot] [PATCH 0/7] *** iMX6SL-evk SPL Support ***

[John Tobias]

This patch is for SPL support for iMX6SL-evk. The said
patches has been tested to work on SD1, SD2 and SD3 ports of the
said board.

After applying the following patches, it will produces
SPL and u-boot.img binary images. You should run the
two commands below to store it in your SD or eMMC.

sudo dd if=SPL of=/dev/xxx bs=1K seek=1; sync
sudo dd if=u-boot.img of=/dev/xxx bs=1K seek=69

John Tobias (7):
  imx6: add macro define inclusion
  imx6sl: update DCD configuration file
  imx6sl: add spl on board configuration
  imx6: add additional flexibility for defining macros
  imx6sl: add spl in include header file
  imx6sl: add SPL support for iMX6SL-evk
  kconfig: imx6sl: add add SUPPORT_SPL

 arch/arm/Kconfig                      |   1 +
 arch/arm/cpu/armv7/mx6/ddr.c          |   2 +
 board/freescale/mx6slevk/imximage.cfg |  78 +---------------
 board/freescale/mx6slevk/mx6slevk.c   | 168 +++++++++++++++++++++++++++++++++-
 configs/mx6slevk_defconfig            |   5 +-
 include/configs/imx6_spl.h            |   6 ++
 include/configs/mx6slevk.h            |   8 ++
 7 files changed, 191 insertions(+), 77 deletions(-)

-- 
1.9.1