[U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg
Marek Vasut
marex at denx.de
Thu Nov 6 21:27:19 CET 2014
On Tuesday, November 04, 2014 at 08:36:57 PM, Pavel Machek wrote:
> On Tue 2014-11-04 06:07:33, Marek Vasut wrote:
> > Allow passing in a custom configuration of the gusbcfg register
> > via platform data.
> >
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Chin Liang See <clsee at altera.com>
> > Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> > Cc: Vince Bridgers <vbridger at altera.com>
>
> Acked-by: Pavel Machek <pavel at denx.de>
>
> > debug("Reseting OTG controller\n");
> >
> > - writel(0<<15 /* PHY Low Power Clock sel*/
> > + dflt_gusbcfg =
> > + 0<<15 /* PHY Low Power Clock sel*/
> >
> > |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/
> > |0x5<<10 /* Turnaround time*/
> > |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/
> >
> > @@ -413,8 +415,12 @@ static void reconfig_usbd(void)
> >
> > |0<<6 /* 0: high speed utmi+, 1: full speed serial*/
> > |0<<4 /* 0: utmi+, 1:ulpi*/
> > |1<<3 /* phy i/f 0:8bit, 1:16bit*/
> >
> > - |0x7<<0, /* HS/FS Timeout**/
> > - ®->gusbcfg);
> > + |0x7<<0; /* HS/FS Timeout**/
> > +
>
> "Interesting" comment style. And I'd remove 0x prefixes from constants
> <8...
Lukasz, what do you say to just convert those four boards to use the gusbcfg
platform data afterward ?
btw. you can find the latest version in u-boot-usb:topic/s3c-otg
Best regards,
Marek Vasut
More information about the U-Boot
mailing list