[U-Boot] [PATCH 1/2] mx6slevk: Simplify the return value of setup_fec()
Fabio Estevam
festevam at gmail.com
Mon Nov 17 02:44:41 CET 2014
From: Fabio Estevam <fabio.estevam at freescale.com>
We can simply the return the value from enable_fec_anatop_clock() to make the
code smaller and simpler.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
board/freescale/mx6slevk/mx6slevk.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index e76c343..8111edf 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -230,16 +230,11 @@ int board_eth_init(bd_t *bis)
static int setup_fec(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int ret;
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
- ret = enable_fec_anatop_clock(ENET_50MHz);
- if (ret)
- return ret;
-
- return 0;
+ return enable_fec_anatop_clock(ENET_50MHz);
}
#endif
--
1.9.1
More information about the U-Boot
mailing list