[U-Boot] [PATCH 6/6] arm: socfpga: Add Designware (DW) SPI support to config header

[Stefan Roese]

On 14.11.2014 21:18, Marek Vasut wrote:
> On Wednesday, November 12, 2014 at 06:53:54 PM, Pavel Machek wrote:
>> On Fri 2014-11-07 13:50:34, Stefan Roese wrote:
>>> Enable support for the DW master SPI controller in the config header
>>> for the SoCFPGA. This controller can only be enabled, if DT support
>>> is enabled.
>>>
>>> Signed-off-by: Stefan Roese <sr at denx.de>
>>> Cc: Chin Liang See <clsee at altera.com>
>>> Cc: Dinh Nguyen <dinguyen at altera.com>
>>> Cc: Vince Bridgers <vbridger at altera.com>
>>> Cc: Marek Vasut <marex at denx.de>
>>> Cc: Pavel Machek <pavel at denx.de>
>>> ---
>>>
>>>   include/configs/socfpga_common.h | 12 ++++++++++++
>>>   1 file changed, 12 insertions(+)
>>>
>>> diff --git a/include/configs/socfpga_common.h
>>> b/include/configs/socfpga_common.h index 9fc4212..830b956 100644
>>> --- a/include/configs/socfpga_common.h
>>> +++ b/include/configs/socfpga_common.h
>>> @@ -191,6 +191,18 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>>>
>>>   #define CONFIG_CMD_SF
>>>   #endif
>>>
>>> +#ifdef CONFIG_OF_CONTROL	/* DW SPI is controlled via DT */
>>> +#define CONFIG_CMD_DM
>>> +#define CONFIG_DM
>>> +#define CONFIG_DM_SPI
>>> +#define CONFIG_DESIGNWARE_SPI
>>> +#ifndef __ASSEMBLY__
>>> +unsigned int cm_get_spi_controller_clk_hz(void);
>>> +#define CONFIG_DW_SPI_REF_CLK		cm_get_spi_controller_clk_hz()
>>
>> Putting prototypes into configuration file is ugly. Hiding function
>> call into macro so that it looks like constant is evil. Is there
>> better solution?
>
> The SPI driver should call this function directly. Or is there a reason why
> such a macro is used ?

Historically. I'll check it again and will implement it differently in 
the next version. Tomorrow or on Monday.

Thanks,
Stefan