[U-Boot] [PATCH] powerpc/hydra: fix judging condition of RGMII selection

[shh.xie at gmail.com]

From: Minghuan Lian <Minghuan.Lian at freescale.com>

BRDCFG1_EMI1_SEL_MASK has been changed to 0x78, which contains
selection bits and connected status bit. So the Corresponding mux
value of RGMII is changed to BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN.

Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
---
 board/freescale/corenet_ds/eth_hydra.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
index 35825c4..9d8ca9e 100644
--- a/board/freescale/corenet_ds/eth_hydra.c
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -250,11 +250,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 		return;
 	}
 
-	if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+	if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) {
 		/* RGMII */
 		/* The RGMII PHY is identified by the MAC connected to it */
 		sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
 		fdt_set_phy_handle(fdt, compat, addr, phy);
+		return;
 	}
 
 	/* If it's not RGMII or XGMII, it must be SGMII */
-- 
2.1.0.27.g96db324