[U-Boot] help on using buildman

[York Sun]

On 11/20/2014 11:22 AM, York Sun wrote:
> On 11/20/2014 11:13 AM, Simon Glass wrote:
>> You can only see the make output if you comment out this line in
>> builderthread.py:
>>
>>                 #args.append('-s')
>>
>> Then it will be in a file called 'log'. It would be nice to have an
>> option for that...
>>
> 
> Let me try that.
> 

I made the change to file tools/buildman/builderthread.py

-                args.append('-s')
+#                args.append('-s')

I run it again for one commit and with one board

$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs
--force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
   powerpc: +   MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'.  Stop.
+make: *** [sub-make] Error 2
    0    0    1 /1      MPC832XEMDS_HOST_66

$ ll
../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/
total 28
-rw-rw-r-- 1 jenkins jenkins 11588 Nov 20 13:28 autoconf.mk
-rw-rw-r-- 1 jenkins jenkins     1 Nov 20 13:28 done
-rw-rw-r-- 1 jenkins jenkins   168 Nov 20 13:28 err
-rw-rw-r-- 1 jenkins jenkins   939 Nov 20 13:28 log
-rw-rw-r-- 1 jenkins jenkins   276 Nov 20 13:28 toolchain

I don't see much useful information in file log

$ cat
../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/log

make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
  GEN     ./Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/config.h
  UPD     include/config.h
  GEN     include/autoconf.mk
  GEN     include/autoconf.mk.dep
make[1]: Leaving directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
  CHK     include/config/uboot.release
  CHK     include/generated/timestamp_autogenerated.h
  GEN     ./Makefile
  UPD     include/generated/timestamp_autogenerated.h
  UPD     include/config/uboot.release
make[1]: Leaving directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'

Nothing more than that. Where shall I look for ARCH?

If I build for board T4240QDS, it has error on most but not all. T4240QDS
T4240QDS_SRIO_PCIE_BOOT T4240QDS_SECURE_BOOT failed, but T4240QDS_NAND didn't.

York