[U-Boot] [v3 PATCH 12/12] arm, spl, at91: add spl support for the corvus board

[Andreas Bießmann]

On 31.10.14 08:31, Heiko Schocher wrote:
> replaces the at91bootstrap code with SPL code.
> make the spl image with:
> ./tools/mkimage -T atmelimage -d spl/u-boot-spl.bin spl/boot.bin
> 
> this writes the length of the spl image into the 6th
> execption vector. This is needed from the ROM bootloader.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> Reviewed-by: Bo Shen <voice.shen at atmel.com>

Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>

> 
> ---
> 
> Changes in v3:
> add Reviewed-by from Bo Shen
> 
> Changes in v2:
> - rename function "nand_erase_one" to "spl_nand_erase_one" as
>   Scott Wood suggested
> - add comment from Andreas Biessmann:
>   rename "MPDDRC_CR_EBISHARE" to "MPDDRC_CR_DQMS_SHARED"
> 
>  arch/arm/Kconfig             |   1 +
>  board/siemens/corvus/board.c | 109 ++++++++++++++++++++++++++++++++++++++-----
>  configs/corvus_defconfig     |   5 +-
>  include/configs/corvus.h     |  54 +++++++++++++++++++--
>  4 files changed, 151 insertions(+), 18 deletions(-)