[U-Boot] [PATCH v6 0/5] iMX6 SabreSD SPL Support

[Nikolay Dimitrov]

Hi Fabio,

On 11/12/2014 10:45 PM, Fabio Estevam wrote:
> On Wed, Nov 12, 2014 at 6:42 PM, Nikolay Dimitrov <picmaster at mail.bg> wrote:
>> Hi John,
>>
>> On 11/12/2014 07:14 PM, John Tobias wrote:
>>>
>>> This patch is for SPL support for iMX6 SabreSD. The said
>>> patches has been tested to work on SD2 and SD3 port of the
>>> said board.
>>>
>>> After applying the following patches, it will produces
>>> SPL and u-boot.img binary images.
>>
>>
>> Is it still possible to build a regular, non-SPL image for the SabreSD?
>
> Yes, it still works and I have tested it too.
>
> make mx6qsabresd_config
> make
>
> will generate the non-SPL u-boot.imx binary.

Thanks. This is great, as the non-SPL version is much easier to upload
via OTG. At least I don't know a way to boot the SPL+complete loader
through OTG.

Regards,
Nikolay