[U-Boot] [PATCH] ARM: UniPhier: decrease pre-reloc malloc area size

[Masahiro Yamada]

In the current implementation of the boot sequence of UniPhier
platform, 32KB temporary RAM is available before relocation.
The malloc area and the stack shares the 32KB area.

With CONFIG_SYS_MALLOC_F_LEN set to 0x7000 (28KB), only 0x1000 (4KB)
is left for the stack.  In some use cases, the system hangs up
with stack over-flow.

Even with driver-model UART enabled, the malloc area of 0x2000 (8KB)
should be enough.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---

 include/configs/uniphier-common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h
index b18ae6d..ef81914 100644
--- a/include/configs/uniphier-common.h
+++ b/include/configs/uniphier-common.h
@@ -43,7 +43,7 @@ are defined. Select only one of them."
 #define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_MALLOC_F_LEN  0x7000
+#define CONFIG_SYS_MALLOC_F_LEN  0x2000
 
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
-- 
1.9.1