[U-Boot] [U-Boot,v2] ARM: atmel: add sama5d4 xplained ultra board support

[Andreas Bießmann]

Dear Bo Shen,

Bo Shen <voice.shen at atmel.com> writes:
>The code for this board supports following features:
>  - Boot media support: NAND flash/SD card/SPI flash
>  - Support LCD display (optional, disabled by default)
>  - Support ethernet
>  - Support USB mass storage
>
>Signed-off-by: Bo Shen <voice.shen at atmel.com>
>---
>This patch based on the patch to add sama5d4ek board support.
>
>Changes in v2:
>  - Select CPU_V7 in Kconfig
>
> arch/arm/Kconfig                                |   5 +
> board/atmel/sama5d4_xplained/Kconfig            |  18 ++
> board/atmel/sama5d4_xplained/MAINTAINERS        |   8 +
> board/atmel/sama5d4_xplained/Makefile           |   8 +
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 319 ++++++++++++++++++++++++
> configs/sama5d4_xplained_mmc_defconfig          |   3 +
> configs/sama5d4_xplained_nandflash_defconfig    |   3 +
> configs/sama5d4_xplained_spiflash_defconfig     |   3 +
> include/configs/sama5d4_xplained.h              | 216 ++++++++++++++++
> 9 files changed, 583 insertions(+)
> create mode 100644 board/atmel/sama5d4_xplained/Kconfig
> create mode 100644 board/atmel/sama5d4_xplained/MAINTAINERS
> create mode 100644 board/atmel/sama5d4_xplained/Makefile
> create mode 100644 board/atmel/sama5d4_xplained/sama5d4_xplained.c
> create mode 100644 configs/sama5d4_xplained_mmc_defconfig
> create mode 100644 configs/sama5d4_xplained_nandflash_defconfig
> create mode 100644 configs/sama5d4_xplained_spiflash_defconfig
> create mode 100644 include/configs/sama5d4_xplained.h

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann