[U-Boot] [PATCH 2/4 v4] arm: socfpga: dts: Add Cadence QSPI DT node to socfpga.dtsi

[Pavel Machek]

On Fri 2014-11-07 18:26:05, Stefan Roese wrote:
> Hi Simon,
> 
> On 07.11.2014 18:21, Simon Glass wrote:
> >>+               qspi: spi at ff705000 {
> >>+                       compatible = "cadence,qspi";
> >>+                       #address-cells = <1>;
> >>+                       #size-cells = <0>;
> >>+                       reg = <0xff705000 0x1000>,
> >>+                               <0xffa00000 0x1000>;
> >>+                       interrupts = <0 151 4>;
> >>+                       clocks = <&qspi_clk>;
> >>+                       ext-decoder = <0>;  /* external decoder */
> >>+                       num-chipselect = <4>;
> >>+                       fifo-depth = <128>;
> >>+                       bus-num = <2>;
> >>+                       status = "disabled";
> >>+               };
> >>+
> >
> >Is this the same binding as Linux? Can you please bring in the binding
> >document too? Some of these feel like they should have a
> >"manufacture," prefix.
> 
> Yes, its from Linux. But not from kernel.org but from the Altera
> Rocketboards.org version (v3.16). So the bindings might change if this
> driver would be pushed to mainline Linux.

I guess it would be good to submit the binding to Linux for review, so
that we don't end up with two incompatible bindings...

								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html