[U-Boot] loadb problem. Hangs on START_CHAR

[bomellberg]

Upon further investigation, it seems like the board DOES receive the 0x01
START_CHAR. An RS232 sniffer shows that the 0x01 is being sent, and the
board answers 'S'. It does not show on the console though.

I will need to go deeper into the code to see why it fails. Both CKermit and
TeraTerm makes several tries, but nothing is transferred.



--
View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144p195379.html
Sent from the U-Boot mailing list archive at Nabble.com.