[U-Boot] [PATCH] mx6sabresd: Move the DCD settings to spl code
Nikolay Dimitrov
picmaster at mail.bg
Fri Nov 14 12:48:03 CET 2014
Hi Fabio,
On 11/13/2014 11:58 PM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR.
>
> Move the configuration to the spl code.
I forgot to asker earlier, but what are the benefits of going from DCD
to SPL code to provide HW initialization?
Regards,
Nikolay
More information about the U-Boot
mailing list