[U-Boot] [PATCH] dwc_ahsata.c: Add weak disable_sata_clock

[Tom Rini]

On Tue, Nov 25, 2014 at 11:50:41PM +0100, Soeren Moch wrote:
> On 11/25/14 23:34, Soeren Moch wrote:
> >> Signed-off-by: Tom Rini <trini at ti.com  <http://lists.denx.de/mailman/listinfo/u-boot>>
> >> ---
> >> drivers/block/dwc_ahsata.c |    5 +++++
> >>  1 file changed, 5 insertions(+)
> >>
> >> diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
> >> index 9a2b547..e9d4283 100644
> >> --- a/drivers/block/dwc_ahsata.c
> >> +++ b/drivers/block/dwc_ahsata.c
> >> @@ -16,6 +16,7 @@
> >>  #include <asm/errno.h>
> >>  #include <asm/io.h>
> >>  #include <linux/bitops.h>
> >> +#include <linux/compiler.h>
> >>  #include <asm/arch/clock.h>
> >>  #include <asm/arch/sys_proto.h>
> >>  #include "dwc_ahsata.h"
> >> @@ -592,6 +593,10 @@ int init_sata(int dev)
> >>  	return 0;
> >>  }
> >>
> >> +__weak void  disable_sata_clock(void)
> >> +{
> >> +}
> >> +
> >>  int reset_sata(int dev)
> >>  {
> >>  	struct ahci_probe_ent *probe_ent =
> >
> >Tom, Nikita,
> >
> >instead of adding a weak function for architectures without 'disable_sata_clock',
> >should we remove this call from reset_sata entirely?
> >
> >'reset_sata' is called repeatedly for several devices, but 'disable_sata_clock'
> >has no such device parameter. Which clock should be disabled here? Makes not much
> >sense for me.
> >
> >BTW, there is an additional problem with 'reset_sata'. If sata support is configured
> >into u-boot, but nobody has called 'sata init' before booting the kernel, I see a
> >data abort exception on bootm. Tested on TBS2910 board (i.MX6Q-based).

I'm fine with reverting the original patch too, which sounds like the
best case here.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141125/c935952e/attachment.pgp>