[U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support

Shaohui Xie Shaohui.Xie at freescale.com
Mon Nov 17 04:04:07 CET 2014


This patch series are based on patch:
http://patchwork.ozlabs.org/patch/409932/


Best Regards, 
Shaohui Xie
> -----Original Message-----
> From: shh.xie at gmail.com [mailto:shh.xie at gmail.com]
> Sent: Thursday, November 13, 2014 11:26 AM
> To: u-boot at lists.denx.de; Sun York-R58495
> Cc: Xie Shaohui-B21989
> Subject: [PATCH 1/5] powerpc/b4860qds: add xfi support
> 
> From: Shaohui Xie <Shaohui.Xie at freescale.com>
> 
> We need following changes to make xfi work on B4:
> 1. set cross-point switch VSC3308 to use sfp config when running xfi; 2. add 10G
> interface check for xfi; 3. set phy address for xfi so the 10G ports can be
> registered by mdio;
> 
> Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
> ---
>  board/freescale/b4860qds/b4860qds.c     | 40 +++++++++++++++++++++++++++------
>  board/freescale/b4860qds/eth_b4860qds.c |  6 +++++
>  drivers/net/fm/b4860.c                  |  4 +++-
>  3 files changed, 42 insertions(+), 8 deletions(-)



More information about the U-Boot mailing list