[U-Boot] [PATCH v8 1/3] exynos5: fix GPIO information of exynos5420
Przemyslaw Marczak
p.marczak at samsung.com
Tue Nov 18 12:46:47 CET 2014
Hello,
On 11/18/2014 03:29 AM, Hyungwon Hwang wrote:
> Thanks for your reviews. I did not know that the code from Simon Glass
> is merged. I will remove this patch will be removed from the next
> version.
>
> Thanks.
>
> Best regards,
> Hyungwon Hwang
>
> On Mon, 17 Nov 2014 10:51:21 +0100
> Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>
>> Hello,
>>
>> Hyungwon, please check my last changes added to those files:
>> - arch/arm/include/asm/arch-exynos/gpio.h
>> (Exynos4x12 gpio enum and exynos4x12_gpio_data.)
>> - arch/arm/include/asm/arch-exynos/cpu.h
>> (Exynos4x12 gpio base sub parts)
>>
>> There was an issue with gaps between some of gpio banks, so I added
>> sub parts definition and it was adequate to *pinctrl.dts and
>> *pinctrl-uboot.dts description.
>>
>> First problem is, that device-tree description has some specified
>> order
>> - and this is the init order (and next real gpio numbering order).
>>
>> So if we have dts nodes like this:
>> - pinctrl at 13400000 { }
>> - pinctrl at 13410000 { }
>> - pinctrl at 14000000 { }
>> - ...
>> then it means, that gpio init should start from base 13400000 - which
>> is "gpy70" tor the E5422... But there is one thing, which should be
>> taken into account - "#include "exynos54xx-pinctrl-uboot.dtsi"",
>> and actually the included file [...]uboot.dts, will define the gpio
>> init order as:
>> - pinctrl at 14010000 - gpa00, gpa10, ..., gph00
>> - pinctrl at 13400000 - gpy70, gpx00, ..., gpx30 (gpx0->reg=<0xc00>)
>> - pinctrl at 13410000 - gpc00, ..., gpy60
>> - pinctrl at 14000000 - gpe00, ..., gpj40
>> - pinctrl at 03860000 - gpz00
>>
>> So, the above gpioXX bind order, should be equal to the enum
>> exynos5420_gpio_pin { }. This is important, because if you type:
>>
>> ODROID-XU3 # gpio toggle gpy00
>>
>> then you will get the a result:
>>
>> gpio: pin gpy00 (gpio 160) value is 0
>>
>> Take a notice that gpy00 == gpio 160, but you defined it as 0 in your
>> enum! So any call to the gpio inside the code, like this one:
>>
>> gpio_set_value(EXYNOS5420_GPIO_Y70, 0);
>>
>> like the pinmux do - will pass wrong gpio number to the function.
>> And if you are lucky - some gpio numbers could work fine:)
>>
>> On 11/17/2014 08:45 AM, Simon Glass wrote:
>>> Hi Hyungwon,
>>>
>>> On 14 November 2014 06:25, Hyungwon Hwang <human.hwang at samsung.com>
>>> wrote:
>>>> This patch fixes wrong GPIO information such as GPIO bank, table
>>>> which is used to convert GPIO name to index, bank base address,
>>>> and etc.
>>>>
>>>> Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
>>>> Tested-by: Lukasz Majewski <l.majewski at samsung.com>
>>>> Acked-by: Lukasz Majewski <l.majewski at samsung.com>
>>>> Cc: Minkyu Kang <mk7.kang at samsung.com>
>>>> Cc: Lukasz Majewski <l.majewski at samsung.com>
>>>> ---
>>>> Changes for v4:
>>>> - None
>>>>
>>>> Changes for v5:
>>>> - None
>>>>
>>>> Changes for v6:
>>>> - None
>>>>
>>>> Changes for v7:
>>>> - None
>>>>
>>>> Changes for v8:
>>>> - None
>>>>
>>>> arch/arm/include/asm/arch-exynos/cpu.h | 11 +-
>>>> arch/arm/include/asm/arch-exynos/gpio.h | 232
>>>> +++++++++++++++----------------- 2 files changed, 117
>>>> insertions(+), 126 deletions(-)
>>>>
>>>> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h
>>>> b/arch/arm/include/asm/arch-exynos/cpu.h index 29674ad..48936de
>>>> 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h
>>>> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
>>>> @@ -148,7 +148,7 @@
>>>>
>>>> /* EXYNOS5420 */
>>>> #define EXYNOS5420_AUDIOSS_BASE 0x03810000
>>>> -#define EXYNOS5420_GPIO_PART6_BASE 0x03860000
>>>> +#define EXYNOS5420_GPIO_PART5_BASE 0x03860000
>>>> #define EXYNOS5420_PRO_ID 0x10000000
>>>> #define EXYNOS5420_CLOCK_BASE 0x10010000
>>>> #define EXYNOS5420_POWER_BASE 0x10040000
>>>> @@ -170,11 +170,10 @@
>>>> #define EXYNOS5420_I2S_BASE 0x12D60000
>>>> #define EXYNOS5420_PWMTIMER_BASE 0x12DD0000
>>>> #define EXYNOS5420_SPI_ISP_BASE 0x131A0000
>>>> -#define EXYNOS5420_GPIO_PART2_BASE 0x13400000
>>>> -#define EXYNOS5420_GPIO_PART3_BASE 0x13400C00
>>>> -#define EXYNOS5420_GPIO_PART4_BASE 0x13410000
>>>> -#define EXYNOS5420_GPIO_PART5_BASE 0x14000000
>>>> -#define EXYNOS5420_GPIO_PART1_BASE 0x14010000
>>>> +#define EXYNOS5420_GPIO_PART1_BASE 0x13400000
>>>> +#define EXYNOS5420_GPIO_PART2_BASE 0x13410000
>>>> +#define EXYNOS5420_GPIO_PART3_BASE 0x14000000
>>>> +#define EXYNOS5420_GPIO_PART4_BASE 0x14010000
>>>> #define EXYNOS5420_MIPI_DSIM_BASE 0x14500000
>>>> #define EXYNOS5420_DP_BASE 0x145B0000
>>>>
>>>> diff --git a/arch/arm/include/asm/arch-exynos/gpio.h
>>>> b/arch/arm/include/asm/arch-exynos/gpio.h index 9699954..aef897d
>>>> 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h
>>>> +++ b/arch/arm/include/asm/arch-exynos/gpio.h
>>>> @@ -1042,83 +1042,7 @@ enum exynos5_gpio_pin {
>>>> };
>>>>
>>>> enum exynos5420_gpio_pin {
>>>> - /* GPIO_PART1_STARTS */
>>>> - EXYNOS5420_GPIO_A00, /* 0 */
>>>
>>> Why does this order need to change? I think you might be trying to
>>> remove the device tree work-around that we currently have. See
>>> arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi:
>>>
>>> /*
>>> * Replicate the ordering of
>>> arch/arm/include/asm/arch-exynos/gpio.h
>>> * TODO(sjg at chromium.org): This ordering ceases to matter
>>> once GPIO
>>> * numbers are not needed in U-Boot for exynos.
>>> */
>>> pinctrl at 14010000 {
>>> #address-cells = <1>;
>>> #size-cells = <0>;
>>> };
>>> pinctrl at 13400000 {
>>> #address-cells = <1>;
>>> #size-cells = <0>;
>>> gpy7 {
>>> };
>>>
>>> gpx0 {
>>> reg = <0xc00>;
>>> };
>>> };
>>>
>>> Since you are changing things such that gpy7 comes first, I think
>>> you need to update this file. But then don't you also need to
>>> update all the numbering that we have in the various device tree
>>> files? For example in exynos5420-peach-pit.dts:
>>>
>>> ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
>>>
>>> The 93 will be wrong now I think - should it become 21?
>>>
>>> I do have a vague plan to implement proper device tree support for
>>> GPIOs using driver model, so you could do:
>>>
>>> ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
>>>
>>> The gpx1 bit is already there. We need to bring over the dt-binding
>>> header from Linux, and adjust the driver model uclass to understand
>>> GPIO nodes better.
>>>
>>> But if you are not up for any of this, I wonder if you should just
>>> change the ordering back?
>>>
>>> See also my comments below.
>>>
>>
>> I agree with Simon, please don't change the pin order in this enum.
>>
>>>> - EXYNOS5420_GPIO_A01,
>>>> - EXYNOS5420_GPIO_A02,
>>>> - EXYNOS5420_GPIO_A03,
>>>> - EXYNOS5420_GPIO_A04,
>>>> - EXYNOS5420_GPIO_A05,
>>>> - EXYNOS5420_GPIO_A06,
>>>> - EXYNOS5420_GPIO_A07,
>>>> - EXYNOS5420_GPIO_A10, /* 8 */
>>>> - EXYNOS5420_GPIO_A11,
>>>> - EXYNOS5420_GPIO_A12,
>>>> - EXYNOS5420_GPIO_A13,
>>>> - EXYNOS5420_GPIO_A14,
>>>> - EXYNOS5420_GPIO_A15,
>>>> - EXYNOS5420_GPIO_A16,
>>>> - EXYNOS5420_GPIO_A17,
>>>> - EXYNOS5420_GPIO_A20, /* 16 0x10 */
>>>> - EXYNOS5420_GPIO_A21,
>>>> - EXYNOS5420_GPIO_A22,
>>>> - EXYNOS5420_GPIO_A23,
>>>> - EXYNOS5420_GPIO_A24,
>>>> - EXYNOS5420_GPIO_A25,
>>>> - EXYNOS5420_GPIO_A26,
>>>> - EXYNOS5420_GPIO_A27,
>>>> - EXYNOS5420_GPIO_B00, /* 24 0x18 */
>>>> - EXYNOS5420_GPIO_B01,
>>>> - EXYNOS5420_GPIO_B02,
>>>> - EXYNOS5420_GPIO_B03,
>>>> - EXYNOS5420_GPIO_B04,
>>>> - EXYNOS5420_GPIO_B05,
>>>> - EXYNOS5420_GPIO_B06,
>>>> - EXYNOS5420_GPIO_B07,
>>>> - EXYNOS5420_GPIO_B10, /* 32 0x20 */
>>>> - EXYNOS5420_GPIO_B11,
>>>> - EXYNOS5420_GPIO_B12,
>>>> - EXYNOS5420_GPIO_B13,
>>>> - EXYNOS5420_GPIO_B14,
>>>> - EXYNOS5420_GPIO_B15,
>>>> - EXYNOS5420_GPIO_B16,
>>>> - EXYNOS5420_GPIO_B17,
>>>> - EXYNOS5420_GPIO_B20, /* 40 0x28 */
>>>> - EXYNOS5420_GPIO_B21,
>>>> - EXYNOS5420_GPIO_B22,
>>>> - EXYNOS5420_GPIO_B23,
>>>> - EXYNOS5420_GPIO_B24,
>>>> - EXYNOS5420_GPIO_B25,
>>>> - EXYNOS5420_GPIO_B26,
>>>> - EXYNOS5420_GPIO_B27,
>>>> - EXYNOS5420_GPIO_B30, /* 48 0x30 */
>>>> - EXYNOS5420_GPIO_B31,
>>>> - EXYNOS5420_GPIO_B32,
>>>> - EXYNOS5420_GPIO_B33,
>>>> - EXYNOS5420_GPIO_B34,
>>>> - EXYNOS5420_GPIO_B35,
>>>> - EXYNOS5420_GPIO_B36,
>>>> - EXYNOS5420_GPIO_B37,
>>>> - EXYNOS5420_GPIO_B40, /* 56 0x38 */
>>>> - EXYNOS5420_GPIO_B41,
>>>> - EXYNOS5420_GPIO_B42,
>>>> - EXYNOS5420_GPIO_B43,
>>>> - EXYNOS5420_GPIO_B44,
>>>> - EXYNOS5420_GPIO_B45,
>>>> - EXYNOS5420_GPIO_B46,
>>>> - EXYNOS5420_GPIO_B47,
>>>> - EXYNOS5420_GPIO_H00, /* 64 0x40 */
>>>> - EXYNOS5420_GPIO_H01,
>>>> - EXYNOS5420_GPIO_H02,
>>>> - EXYNOS5420_GPIO_H03,
>>>> - EXYNOS5420_GPIO_H04,
>>>> - EXYNOS5420_GPIO_H05,
>>>> - EXYNOS5420_GPIO_H06,
>>>> - EXYNOS5420_GPIO_H07,
>>>> -
>>>> - /* GPIO PART 2 STARTS*/
>>>> - EXYNOS5420_GPIO_MAX_PORT_PART_1,/* 72 0x48 */
>>>> - EXYNOS5420_GPIO_Y70 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
>>>> + EXYNOS5420_GPIO_Y70,
>>>> EXYNOS5420_GPIO_Y71,
>>>> EXYNOS5420_GPIO_Y72,
>>>> EXYNOS5420_GPIO_Y73,
>>>> @@ -1126,10 +1050,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y75,
>>>> EXYNOS5420_GPIO_Y76,
>>>> EXYNOS5420_GPIO_Y77,
>>>> -
>>>> - /* GPIO PART 3 STARTS*/
>>>> - EXYNOS5420_GPIO_MAX_PORT_PART_2,/* 80 0x50 */
>>>> - EXYNOS5420_GPIO_X00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
>>>> + EXYNOS5420_GPIO_X00,
>>>> EXYNOS5420_GPIO_X01,
>>>> EXYNOS5420_GPIO_X02,
>>>> EXYNOS5420_GPIO_X03,
>>>> @@ -1137,7 +1058,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_X05,
>>>> EXYNOS5420_GPIO_X06,
>>>> EXYNOS5420_GPIO_X07,
>>>> - EXYNOS5420_GPIO_X10, /* 88 0x58 */
>>>> + EXYNOS5420_GPIO_X10,
>>>> EXYNOS5420_GPIO_X11,
>>>> EXYNOS5420_GPIO_X12,
>>>> EXYNOS5420_GPIO_X13,
>>>> @@ -1145,7 +1066,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_X15,
>>>> EXYNOS5420_GPIO_X16,
>>>> EXYNOS5420_GPIO_X17,
>>>> - EXYNOS5420_GPIO_X20, /* 96 0x60 */
>>>> + EXYNOS5420_GPIO_X20,
>>>> EXYNOS5420_GPIO_X21,
>>>> EXYNOS5420_GPIO_X22,
>>>> EXYNOS5420_GPIO_X23,
>>>> @@ -1153,7 +1074,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_X25,
>>>> EXYNOS5420_GPIO_X26,
>>>> EXYNOS5420_GPIO_X27,
>>>> - EXYNOS5420_GPIO_X30, /* 104 0x68 */
>>>> + EXYNOS5420_GPIO_X30,
>>>> EXYNOS5420_GPIO_X31,
>>>> EXYNOS5420_GPIO_X32,
>>>> EXYNOS5420_GPIO_X33,
>>>> @@ -1162,9 +1083,8 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_X36,
>>>> EXYNOS5420_GPIO_X37,
>>>>
>>>> - /* GPIO PART 4 STARTS*/
>>>> - EXYNOS5420_GPIO_MAX_PORT_PART_3,/* 112 0x70 */
>>>> - EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
>>>> + EXYNOS5420_GPIO_MAX_PORT_PART_1,
>>>> + EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
>>>> EXYNOS5420_GPIO_C01,
>>>> EXYNOS5420_GPIO_C02,
>>>> EXYNOS5420_GPIO_C03,
>>>> @@ -1172,7 +1092,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_C05,
>>>> EXYNOS5420_GPIO_C06,
>>>> EXYNOS5420_GPIO_C07,
>>>> - EXYNOS5420_GPIO_C10, /* 120 0x78 */
>>>> + EXYNOS5420_GPIO_C10,
>>>> EXYNOS5420_GPIO_C11,
>>>> EXYNOS5420_GPIO_C12,
>>>> EXYNOS5420_GPIO_C13,
>>>> @@ -1180,7 +1100,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_C15,
>>>> EXYNOS5420_GPIO_C16,
>>>> EXYNOS5420_GPIO_C17,
>>>> - EXYNOS5420_GPIO_C20, /* 128 0x80 */
>>>> + EXYNOS5420_GPIO_C20,
>>>> EXYNOS5420_GPIO_C21,
>>>> EXYNOS5420_GPIO_C22,
>>>> EXYNOS5420_GPIO_C23,
>>>> @@ -1188,7 +1108,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_C25,
>>>> EXYNOS5420_GPIO_C26,
>>>> EXYNOS5420_GPIO_C27,
>>>> - EXYNOS5420_GPIO_C30, /* 136 0x88 */
>>>> + EXYNOS5420_GPIO_C30,
>>>> EXYNOS5420_GPIO_C31,
>>>> EXYNOS5420_GPIO_C32,
>>>> EXYNOS5420_GPIO_C33,
>>>> @@ -1196,7 +1116,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_C35,
>>>> EXYNOS5420_GPIO_C36,
>>>> EXYNOS5420_GPIO_C37,
>>>> - EXYNOS5420_GPIO_C40, /* 144 0x90 */
>>>> + EXYNOS5420_GPIO_C40,
>>>> EXYNOS5420_GPIO_C41,
>>>> EXYNOS5420_GPIO_C42,
>>>> EXYNOS5420_GPIO_C43,
>>>> @@ -1204,7 +1124,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_C45,
>>>> EXYNOS5420_GPIO_C46,
>>>> EXYNOS5420_GPIO_C47,
>>>> - EXYNOS5420_GPIO_D10, /* 152 0x98 */
>>>> + EXYNOS5420_GPIO_D10,
>>>> EXYNOS5420_GPIO_D11,
>>>> EXYNOS5420_GPIO_D12,
>>>> EXYNOS5420_GPIO_D13,
>>>> @@ -1212,7 +1132,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_D15,
>>>> EXYNOS5420_GPIO_D16,
>>>> EXYNOS5420_GPIO_D17,
>>>> - EXYNOS5420_GPIO_Y00, /* 160 0xa0 */
>>>> + EXYNOS5420_GPIO_Y00,
>>>> EXYNOS5420_GPIO_Y01,
>>>> EXYNOS5420_GPIO_Y02,
>>>> EXYNOS5420_GPIO_Y03,
>>>> @@ -1220,7 +1140,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y05,
>>>> EXYNOS5420_GPIO_Y06,
>>>> EXYNOS5420_GPIO_Y07,
>>>> - EXYNOS5420_GPIO_Y10, /* 168 0xa8 */
>>>> + EXYNOS5420_GPIO_Y10,
>>>> EXYNOS5420_GPIO_Y11,
>>>> EXYNOS5420_GPIO_Y12,
>>>> EXYNOS5420_GPIO_Y13,
>>>> @@ -1228,7 +1148,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y15,
>>>> EXYNOS5420_GPIO_Y16,
>>>> EXYNOS5420_GPIO_Y17,
>>>> - EXYNOS5420_GPIO_Y20, /* 176 0xb0 */
>>>> + EXYNOS5420_GPIO_Y20,
>>>> EXYNOS5420_GPIO_Y21,
>>>> EXYNOS5420_GPIO_Y22,
>>>> EXYNOS5420_GPIO_Y23,
>>>> @@ -1236,7 +1156,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y25,
>>>> EXYNOS5420_GPIO_Y26,
>>>> EXYNOS5420_GPIO_Y27,
>>>> - EXYNOS5420_GPIO_Y30, /* 184 0xb8 */
>>>> + EXYNOS5420_GPIO_Y30,
>>>> EXYNOS5420_GPIO_Y31,
>>>> EXYNOS5420_GPIO_Y32,
>>>> EXYNOS5420_GPIO_Y33,
>>>> @@ -1244,7 +1164,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y35,
>>>> EXYNOS5420_GPIO_Y36,
>>>> EXYNOS5420_GPIO_Y37,
>>>> - EXYNOS5420_GPIO_Y40, /* 192 0xc0 */
>>>> + EXYNOS5420_GPIO_Y40,
>>>> EXYNOS5420_GPIO_Y41,
>>>> EXYNOS5420_GPIO_Y42,
>>>> EXYNOS5420_GPIO_Y43,
>>>> @@ -1252,7 +1172,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y45,
>>>> EXYNOS5420_GPIO_Y46,
>>>> EXYNOS5420_GPIO_Y47,
>>>> - EXYNOS5420_GPIO_Y50, /* 200 0xc8 */
>>>> + EXYNOS5420_GPIO_Y50,
>>>> EXYNOS5420_GPIO_Y51,
>>>> EXYNOS5420_GPIO_Y52,
>>>> EXYNOS5420_GPIO_Y53,
>>>> @@ -1260,7 +1180,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y55,
>>>> EXYNOS5420_GPIO_Y56,
>>>> EXYNOS5420_GPIO_Y57,
>>>> - EXYNOS5420_GPIO_Y60, /* 208 0xd0 */
>>>> + EXYNOS5420_GPIO_Y60,
>>>> EXYNOS5420_GPIO_Y61,
>>>> EXYNOS5420_GPIO_Y62,
>>>> EXYNOS5420_GPIO_Y63,
>>>> @@ -1269,9 +1189,8 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_Y66,
>>>> EXYNOS5420_GPIO_Y67,
>>>>
>>>> - /* GPIO_PART5_STARTS */
>>>> - EXYNOS5420_GPIO_MAX_PORT_PART_4,/* 216 0xd8 */
>>>> - EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
>>>> + EXYNOS5420_GPIO_MAX_PORT_PART_2,
>>>> + EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
>>>> EXYNOS5420_GPIO_E01,
>>>> EXYNOS5420_GPIO_E02,
>>>> EXYNOS5420_GPIO_E03,
>>>> @@ -1279,7 +1198,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_E05,
>>>> EXYNOS5420_GPIO_E06,
>>>> EXYNOS5420_GPIO_E07,
>>>> - EXYNOS5420_GPIO_E10, /* 224 0xe0 */
>>>> + EXYNOS5420_GPIO_E10,
>>>> EXYNOS5420_GPIO_E11,
>>>> EXYNOS5420_GPIO_E12,
>>>> EXYNOS5420_GPIO_E13,
>>>> @@ -1287,7 +1206,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_E15,
>>>> EXYNOS5420_GPIO_E16,
>>>> EXYNOS5420_GPIO_E17,
>>>> - EXYNOS5420_GPIO_F00, /* 232 0xe8 */
>>>> + EXYNOS5420_GPIO_F00,
>>>> EXYNOS5420_GPIO_F01,
>>>> EXYNOS5420_GPIO_F02,
>>>> EXYNOS5420_GPIO_F03,
>>>> @@ -1295,7 +1214,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_F05,
>>>> EXYNOS5420_GPIO_F06,
>>>> EXYNOS5420_GPIO_F07,
>>>> - EXYNOS5420_GPIO_F10, /* 240 0xf0 */
>>>> + EXYNOS5420_GPIO_F10,
>>>> EXYNOS5420_GPIO_F11,
>>>> EXYNOS5420_GPIO_F12,
>>>> EXYNOS5420_GPIO_F13,
>>>> @@ -1303,7 +1222,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_F15,
>>>> EXYNOS5420_GPIO_F16,
>>>> EXYNOS5420_GPIO_F17,
>>>> - EXYNOS5420_GPIO_G00, /* 248 0xf8 */
>>>> + EXYNOS5420_GPIO_G00,
>>>> EXYNOS5420_GPIO_G01,
>>>> EXYNOS5420_GPIO_G02,
>>>> EXYNOS5420_GPIO_G03,
>>>> @@ -1311,7 +1230,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_G05,
>>>> EXYNOS5420_GPIO_G06,
>>>> EXYNOS5420_GPIO_G07,
>>>> - EXYNOS5420_GPIO_G10, /* 256 0x100 */
>>>> + EXYNOS5420_GPIO_G10,
>>>> EXYNOS5420_GPIO_G11,
>>>> EXYNOS5420_GPIO_G12,
>>>> EXYNOS5420_GPIO_G13,
>>>> @@ -1319,7 +1238,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_G15,
>>>> EXYNOS5420_GPIO_G16,
>>>> EXYNOS5420_GPIO_G17,
>>>> - EXYNOS5420_GPIO_G20, /* 264 0x108 */
>>>> + EXYNOS5420_GPIO_G20,
>>>> EXYNOS5420_GPIO_G21,
>>>> EXYNOS5420_GPIO_G22,
>>>> EXYNOS5420_GPIO_G23,
>>>> @@ -1327,7 +1246,7 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_G25,
>>>> EXYNOS5420_GPIO_G26,
>>>> EXYNOS5420_GPIO_G27,
>>>> - EXYNOS5420_GPIO_J40, /* 272 0x110 */
>>>> + EXYNOS5420_GPIO_J40,
>>>> EXYNOS5420_GPIO_J41,
>>>> EXYNOS5420_GPIO_J42,
>>>> EXYNOS5420_GPIO_J43,
>>>> @@ -1336,15 +1255,89 @@ enum exynos5420_gpio_pin {
>>>> EXYNOS5420_GPIO_J46,
>>>> EXYNOS5420_GPIO_J47,
>>>>
>>>> - /* GPIO_PART6_STARTS */
>>>> - EXYNOS5420_GPIO_MAX_PORT_PART_5,/* 280 0x118 */
>>>> - EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_5,
>>>> + EXYNOS5420_GPIO_MAX_PORT_PART_3,
>>>> + EXYNOS5420_GPIO_A00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
>>>> + EXYNOS5420_GPIO_A01,
>>>> + EXYNOS5420_GPIO_A02,
>>>> + EXYNOS5420_GPIO_A03,
>>>> + EXYNOS5420_GPIO_A04,
>>>> + EXYNOS5420_GPIO_A05,
>>>> + EXYNOS5420_GPIO_A06,
>>>> + EXYNOS5420_GPIO_A07,
>>>> + EXYNOS5420_GPIO_A10,
>>>> + EXYNOS5420_GPIO_A11,
>>>> + EXYNOS5420_GPIO_A12,
>>>> + EXYNOS5420_GPIO_A13,
>>>> + EXYNOS5420_GPIO_A14,
>>>> + EXYNOS5420_GPIO_A15,
>>>> + EXYNOS5420_GPIO_A16,
>>>> + EXYNOS5420_GPIO_A17,
>>>> + EXYNOS5420_GPIO_A20,
>>>> + EXYNOS5420_GPIO_A21,
>>>> + EXYNOS5420_GPIO_A22,
>>>> + EXYNOS5420_GPIO_A23,
>>>> + EXYNOS5420_GPIO_A24,
>>>> + EXYNOS5420_GPIO_A25,
>>>> + EXYNOS5420_GPIO_A26,
>>>> + EXYNOS5420_GPIO_A27,
>>>> + EXYNOS5420_GPIO_B00,
>>>> + EXYNOS5420_GPIO_B01,
>>>> + EXYNOS5420_GPIO_B02,
>>>> + EXYNOS5420_GPIO_B03,
>>>> + EXYNOS5420_GPIO_B04,
>>>> + EXYNOS5420_GPIO_B05,
>>>> + EXYNOS5420_GPIO_B06,
>>>> + EXYNOS5420_GPIO_B07,
>>>> + EXYNOS5420_GPIO_B10,
>>>> + EXYNOS5420_GPIO_B11,
>>>> + EXYNOS5420_GPIO_B12,
>>>> + EXYNOS5420_GPIO_B13,
>>>> + EXYNOS5420_GPIO_B14,
>>>> + EXYNOS5420_GPIO_B15,
>>>> + EXYNOS5420_GPIO_B16,
>>>> + EXYNOS5420_GPIO_B17,
>>>> + EXYNOS5420_GPIO_B20,
>>>> + EXYNOS5420_GPIO_B21,
>>>> + EXYNOS5420_GPIO_B22,
>>>> + EXYNOS5420_GPIO_B23,
>>>> + EXYNOS5420_GPIO_B24,
>>>> + EXYNOS5420_GPIO_B25,
>>>> + EXYNOS5420_GPIO_B26,
>>>> + EXYNOS5420_GPIO_B27,
>>>> + EXYNOS5420_GPIO_B30,
>>>> + EXYNOS5420_GPIO_B31,
>>>> + EXYNOS5420_GPIO_B32,
>>>> + EXYNOS5420_GPIO_B33,
>>>> + EXYNOS5420_GPIO_B34,
>>>> + EXYNOS5420_GPIO_B35,
>>>> + EXYNOS5420_GPIO_B36,
>>>> + EXYNOS5420_GPIO_B37,
>>>> + EXYNOS5420_GPIO_B40,
>>>> + EXYNOS5420_GPIO_B41,
>>>> + EXYNOS5420_GPIO_B42,
>>>> + EXYNOS5420_GPIO_B43,
>>>> + EXYNOS5420_GPIO_B44,
>>>> + EXYNOS5420_GPIO_B45,
>>>> + EXYNOS5420_GPIO_B46,
>>>> + EXYNOS5420_GPIO_B47,
>>>> + EXYNOS5420_GPIO_H00,
>>>> + EXYNOS5420_GPIO_H01,
>>>> + EXYNOS5420_GPIO_H02,
>>>> + EXYNOS5420_GPIO_H03,
>>>> + EXYNOS5420_GPIO_H04,
>>>> + EXYNOS5420_GPIO_H05,
>>>> + EXYNOS5420_GPIO_H06,
>>>> + EXYNOS5420_GPIO_H07,
>>>> +
>>>> + EXYNOS5420_GPIO_MAX_PORT_PART_4,
>>>> + EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
>>>> EXYNOS5420_GPIO_Z1,
>>>> EXYNOS5420_GPIO_Z2,
>>>> EXYNOS5420_GPIO_Z3,
>>>> EXYNOS5420_GPIO_Z4,
>>>> EXYNOS5420_GPIO_Z5,
>>>> EXYNOS5420_GPIO_Z6,
>>>> +
>>>> EXYNOS5420_GPIO_MAX_PORT
>>>> };
>>>>
>>>> @@ -1385,14 +1378,13 @@ static struct gpio_info
>>>> exynos5_gpio_data[EXYNOS5_GPIO_NUM_PARTS] =
>>>> { { EXYNOS5_GPIO_PART8_BASE, EXYNOS5_GPIO_MAX_PORT }, };
>>>>
>>>> -#define EXYNOS5420_GPIO_NUM_PARTS 6
>>>> +#define EXYNOS5420_GPIO_NUM_PARTS 5
>>
>> And this code should be updated with additional parts like Exynos4x12
>> has. See the gap between gpy7 and gpx0. But this was actually for
>> non-dm gpio calls - probably in the future those definitions could be
>> removed.
>>
>>>> static struct gpio_info
>>>> exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] =
>>>> { { EXYNOS5420_GPIO_PART1_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_1 },
>>>> { EXYNOS5420_GPIO_PART2_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_2 },
>>>> { EXYNOS5420_GPIO_PART3_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_3 },
>>>> { EXYNOS5420_GPIO_PART4_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_4 },
>>>> - { EXYNOS5420_GPIO_PART5_BASE,
>>>> EXYNOS5420_GPIO_MAX_PORT_PART_5 },
>>>> - { EXYNOS5420_GPIO_PART6_BASE, EXYNOS5420_GPIO_MAX_PORT },
>>>> + { EXYNOS5420_GPIO_PART5_BASE, EXYNOS5420_GPIO_MAX_PORT },
>>>> };
>>>>
>>>> static inline struct gpio_info *get_gpio_data(void)
>>>> @@ -1505,17 +1497,17 @@ static const struct gpio_name_num_table
>>>> exynos5_gpio_table[] = { };
>>>>
>>>> static const struct gpio_name_num_table exynos5420_gpio_table[]
>>>> = {
>>>> - GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00,
>>>> 0),
>>>> - GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00,
>>>> 0),
>>>> - GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Y70,
>>>> 0), GPIO_ENTRY('x', EXYNOS5420_GPIO_X00, EXYNOS5420_GPIO_C00, 0),
>>>> GPIO_ENTRY('c', EXYNOS5420_GPIO_C00, EXYNOS5420_GPIO_D10,
>>>> 0),
>>>> - GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00,
>>>> 010),
>>>> + GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00,
>>>> 0), GPIO_ENTRY('y', EXYNOS5420_GPIO_Y00, EXYNOS5420_GPIO_E00, 0),
>>>> GPIO_ENTRY('e', EXYNOS5420_GPIO_E00, EXYNOS5420_GPIO_F00,
>>>> 0), GPIO_ENTRY('f', EXYNOS5420_GPIO_F00, EXYNOS5420_GPIO_G00, 0),
>>>> GPIO_ENTRY('g', EXYNOS5420_GPIO_G00, EXYNOS5420_GPIO_J40,
>>>> 0),
>>>> - GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_Z0,
>>>> 040),
>>>> + GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_A00,
>>>> 0),
>>>> + GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00,
>>>> 0),
>>>> + GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00,
>>>> 0),
>>>> + GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Z0,
>>>> 0), GPIO_ENTRY('z', EXYNOS5420_GPIO_Z0, EXYNOS5420_GPIO_MAX_PORT,
>>>> 0), { 0 }
>>>> };
>>>
>>> I don't believe these arrays are used anymore. You should be able to
>>> create a patch to delete them.
>>>
>>> Regards,
>>> Simon
>>>
>>
>> Best regards,
>
>
Please keep in mind about adding additional parts to
exynos5420_gpio_data, which I mentioned about in a previous comment.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list