[U-Boot] [PATCH v4] sun6i: Add basic axp221 driver
Hans de Goede
hdegoede at redhat.com
Mon Nov 10 14:11:51 CET 2014
From: Oliver Schinagl <oliver at schinagl.nl>
The A31 uses the AXP221 pmic for various voltages.
Signed-off-by: Oliver Schinagl <oliver at schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
--
Changes in v2:
-Rebase
Changes in v3:
-Add support for all dldo and aldo-s
-Add Kconfig option to select building AXP221 and to select voltage of
dldo and aldo-s
Changes in v4:
-Add axp221_setbits helper function
-Use symbolic names for enabled bits in CTRL1 - CTRL3 registers
---
board/sunxi/board.c | 26 +++++++
drivers/power/Kconfig | 47 +++++++++++++
drivers/power/Makefile | 1 +
drivers/power/axp221.c | 186 +++++++++++++++++++++++++++++++++++++++++++++++++
include/axp221.h | 50 +++++++++++++
5 files changed, 310 insertions(+)
create mode 100644 drivers/power/axp221.c
create mode 100644 include/axp221.h
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 03890c8..e6ec5b8 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -19,6 +19,9 @@
#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dram.h>
@@ -169,6 +172,29 @@ void sunxi_board_init(void)
power_failed |= axp209_set_ldo3(2800);
power_failed |= axp209_set_ldo4(2800);
#endif
+#ifdef CONFIG_AXP221_POWER
+ power_failed = axp221_init();
+ power_failed |= axp221_set_dcdc1(3000);
+ power_failed |= axp221_set_dcdc2(1200);
+ power_failed |= axp221_set_dcdc3(1200);
+ power_failed |= axp221_set_dcdc4(1200);
+ power_failed |= axp221_set_dcdc5(1500);
+#if CONFIG_AXP221_DLDO1_VOLT != -1
+ power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
+#endif
+#if CONFIG_AXP221_DLDO4_VOLT != -1
+ power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO1_VOLT != -1
+ power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO2_VOLT != -1
+ power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO3_VOLT != -1
+ power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
+#endif
+#endif
printf("DRAM:");
ramsize = sunxi_dram_init();
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index e69de29..1ec7c0e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -0,0 +1,47 @@
+config AXP221_POWER
+ boolean "axp221 pmic support"
+ depends on MACH_SUN6I
+ default y
+ ---help---
+ Say y here to enable support for the axp221 pmic found on most sun6i
+ (A31) boards.
+
+config AXP221_DLDO1_VOLT
+ int "axp221 dldo1 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to
+ disable dldo1.
+
+config AXP221_DLDO4_VOLT
+ int "axp221 dldo4 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to
+ disable dldo4.
+
+config AXP221_ALDO1_VOLT
+ int "axp221 aldo1 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to
+ disable aldo1.
+
+config AXP221_ALDO2_VOLT
+ int "axp221 aldo2 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to
+ disable aldo2.
+
+config AXP221_ALDO3_VOLT
+ int "axp221 aldo3 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to
+ disable aldo3.
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index dc64e4d..04bd996 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_AXP152_POWER) += axp152.o
obj-$(CONFIG_AXP209_POWER) += axp209.o
+obj-$(CONFIG_AXP221_POWER) += axp221.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c
new file mode 100644
index 0000000..941193a
--- /dev/null
+++ b/drivers/power/axp221.c
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/p2wi.h>
+#include <axp221.h>
+
+static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+ if (mvolt < min)
+ mvolt = min;
+ else if (mvolt > max)
+ mvolt = max;
+
+ return (mvolt - min) / div;
+}
+
+static int axp221_setbits(u8 reg, u8 bits)
+{
+ int ret;
+ u8 val;
+
+ ret = p2wi_read(reg, &val);
+ if (ret)
+ return ret;
+
+ val |= bits;
+ return p2wi_write(reg, val);
+}
+
+int axp221_set_dcdc1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+
+ ret = p2wi_write(AXP221_DCDC1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DCDC1_EN);
+}
+
+int axp221_set_dcdc2(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
+
+ return p2wi_write(AXP221_DCDC2_CTRL, cfg);
+}
+
+int axp221_set_dcdc3(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
+
+ return p2wi_write(AXP221_DCDC3_CTRL, cfg);
+}
+
+int axp221_set_dcdc4(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
+
+ return p2wi_write(AXP221_DCDC4_CTRL, cfg);
+}
+
+int axp221_set_dcdc5(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
+
+ return p2wi_write(AXP221_DCDC5_CTRL, cfg);
+}
+
+int axp221_set_dldo1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO1_EN);
+}
+
+int axp221_set_dldo2(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO2_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO2_EN);
+}
+
+int axp221_set_dldo3(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO3_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO3_EN);
+}
+
+int axp221_set_dldo4(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO4_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO4_EN);
+}
+
+int axp221_set_aldo1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL1,
+ AXP221_OUTPUT_CTRL1_ALDO1_EN);
+}
+
+int axp221_set_aldo2(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO2_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL1,
+ AXP221_OUTPUT_CTRL1_ALDO2_EN);
+}
+
+int axp221_set_aldo3(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO3_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL3,
+ AXP221_OUTPUT_CTRL3_ALDO3_EN);
+}
+
+int axp221_init(void)
+{
+ u8 axp_chip_id;
+ int ret;
+
+ p2wi_init();
+ ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+ AXP221_INIT_DATA);
+ if (ret)
+ return ret;
+
+ ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
+ if (ret)
+ return ret;
+
+ if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
+ return -ENODEV;
+
+ return 0;
+}
diff --git a/include/axp221.h b/include/axp221.h
new file mode 100644
index 0000000..e3b4409
--- /dev/null
+++ b/include/axp221.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
+ *
+ * X-Powers AXP221 Power Management IC driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define AXP221_CHIP_ADDR 0x68
+#define AXP221_CTRL_ADDR 0x3e
+#define AXP221_INIT_DATA 0x3e
+
+#define AXP221_CHIP_ID 0x03
+#define AXP221_OUTPUT_CTRL1 0x10
+#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
+#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
+#define AXP221_OUTPUT_CTRL2 0x12
+#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
+#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
+#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
+#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
+#define AXP221_OUTPUT_CTRL2_DCDC1_EN (1 << 7)
+#define AXP221_OUTPUT_CTRL3 0x13
+#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
+#define AXP221_DLDO1_CTRL 0x15
+#define AXP221_DLDO2_CTRL 0x16
+#define AXP221_DLDO3_CTRL 0x17
+#define AXP221_DLDO4_CTRL 0x18
+#define AXP221_DCDC1_CTRL 0x21
+#define AXP221_DCDC2_CTRL 0x22
+#define AXP221_DCDC3_CTRL 0x23
+#define AXP221_DCDC4_CTRL 0x24
+#define AXP221_DCDC5_CTRL 0x25
+#define AXP221_ALDO1_CTRL 0x28
+#define AXP221_ALDO2_CTRL 0x28
+#define AXP221_ALDO3_CTRL 0x2a
+
+int axp221_set_dcdc1(unsigned int mvolt);
+int axp221_set_dcdc2(unsigned int mvolt);
+int axp221_set_dcdc3(unsigned int mvolt);
+int axp221_set_dcdc4(unsigned int mvolt);
+int axp221_set_dcdc5(unsigned int mvolt);
+int axp221_set_dldo1(unsigned int mvolt);
+int axp221_set_dldo2(unsigned int mvolt);
+int axp221_set_dldo3(unsigned int mvolt);
+int axp221_set_dldo4(unsigned int mvolt);
+int axp221_set_aldo1(unsigned int mvolt);
+int axp221_set_aldo2(unsigned int mvolt);
+int axp221_set_aldo3(unsigned int mvolt);
+int axp221_init(void);
--
2.1.0
More information about the U-Boot
mailing list