[U-Boot] [U-Boot, v3, 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic

[Andreas Bießmann]

Dear Heiko Schocher,

Heiko Schocher <hs at denx.de> writes:
>device ready pin is signalling that the device is ready on state 1
>not on 0. Simmiliar as it is in drivers/mtd/nand/nand_spl_simple.c
>
>Signed-off-by: Heiko Schocher <hs at denx.de>
>Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>Reviewed-by: Bo Shen <voice.shen at atmel.com>
>Acked-by: Scott Wood <scottwood at freescale.com>
>---
>
>Changes in v3:
>add Acked-by from Scott Wood
>add Reviewed-by from Bo Shen
>
>Changes in v2:
>add Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>
> drivers/mtd/nand/atmel_nand.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)

applied to u-boot-atmel/master, thanks!

Best regards,
Andreas Bießmann