[U-Boot] [PATCH 2/2] mx6sxsabresd: Add thermal support
Fabio Estevam
fabio.estevam at freescale.com
Tue Nov 25 16:11:07 CET 2014
Add thermal support so that the temperature of the chip can be displayed on
boot:
U-Boot 2015.01-rc1-18268-g1366c05-dirty (Nov 25 2014 - 13:02:42)
CPU: Freescale i.MX6SX rev1.0 at 792 MHz
CPU: Temperature 50 C
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
include/configs/mx6sxsabresd.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index d8ab291..5e0edab 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -208,6 +208,16 @@
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
+#define CONFIG_DM
+#define CONFIG_DM_THERMAL
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
--
1.9.1
More information about the U-Boot
mailing list