[U-Boot] [PATCH 3/4] usb: UniPhier: add UniPhier on-chip EHCI host driver support

Masahiro Yamada yamada.m at jp.panasonic.com
Fri Nov 7 10:48:33 CET 2014 

Support EHCI host driver used on Panasonic UniPhier platform.
Since Device Tree is not supported on UniPhier yet, the base address
of USB cores are passed from board files (platdevice.c).

TODO for me:
Move the base address to device trees.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Cc: Marek Vasut <marex at denx.de>
---

 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c   | 13 ++++++++
 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c  | 10 ++++++
 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c  | 13 ++++++++
 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h | 33 ++++++++++++++++++
 arch/arm/include/asm/arch-uniphier/platdevice.h    |  2 ++
 drivers/usb/host/Kconfig                           |  8 +++++
 drivers/usb/host/Makefile                          |  1 +
 drivers/usb/host/ehci-uniphier.c                   | 39 ++++++++++++++++++++++
 8 files changed, 119 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h
 create mode 100644 drivers/usb/host/ehci-uniphier.c

diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
index 0047223..62f5b01 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
@@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
 SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
 SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
 SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+	{
+		.base = 0x5a800100,
+	},
+	{
+		.base = 0x5a810100,
+	},
+	{
+		.base = 0x5a820100,
+	},
+};
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
index 6da921e..1843d04 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
@@ -13,3 +13,13 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
 SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
 SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
 SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+	{
+		.base = 0x5a800100,
+	},
+	{
+		.base = 0x5a810100,
+	},
+};
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
index 59d054a..72ec599 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
@@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
 SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
 SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
 SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+	{
+		.base = 0x5a800100,
+	},
+	{
+		.base = 0x5a810100,
+	},
+	{
+		.base = 0x5a820100,
+	},
+};
diff --git a/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h
new file mode 100644
index 0000000..e9c5fb4
--- /dev/null
+++ b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLAT_UNIPHIER_EHCI_H
+#define __PLAT_UNIPHIER_EHCI_H
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include "mio-regs.h"
+
+struct uniphier_ehci_platform_data {
+	unsigned long base;
+};
+
+extern struct uniphier_ehci_platform_data uniphier_ehci_platdata[];
+
+static inline void uniphier_ehci_reset(int index, int on)
+{
+	u32 tmp;
+
+	tmp = readl(MIO_USB_RSTCTRL(index));
+	if (on)
+		tmp &= ~MIO_USB_RSTCTRL_XRST;
+	else
+		tmp |= MIO_USB_RSTCTRL_XRST;
+	writel(tmp, MIO_USB_RSTCTRL(index));
+}
+
+#endif /* __PLAT_UNIPHIER_EHCI_H */
diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h
index cdf7d13..62a5126 100644
--- a/arch/arm/include/asm/arch-uniphier/platdevice.h
+++ b/arch/arm/include/asm/arch-uniphier/platdevice.h
@@ -21,4 +21,6 @@ U_BOOT_DEVICE(serial##n) = {						\
 	.platdata = &serial_device##n					\
 };
 
+#include <asm/arch/ehci-uniphier.h>
+
 #endif /* ARCH_PLATDEVICE_H */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8a6496a..30d1457 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -45,4 +45,12 @@ config USB_EHCI
 
 if USB_EHCI_HCD
 
+config USB_EHCI_UNIPHIER
+	bool "Support for Panasonic UniPhier on-chip EHCI USB controller"
+	depends on ARCH_UNIPHIER
+	default y
+	---help---
+	  Enables support for the on-chip EHCI controller on Panasonic
+	  UniPhier SoCs.
+
 endif
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1c35929..c11b551 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c
new file mode 100644
index 0000000..77f6c9d
--- /dev/null
+++ b/drivers/usb/host/ehci-uniphier.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/ehci-uniphier.h>
+#include "ehci.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
+		  struct ehci_hcor **hcor)
+{
+	struct ehci_hccr *cr;
+	struct ehci_hcor *or;
+
+	uniphier_ehci_reset(index, 0);
+
+	cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base);
+	or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase));
+
+	*hccr = cr;
+	*hcor = or;
+
+	return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+	uniphier_ehci_reset(index, 1);
+
+	return 0;
+}
-- 
1.9.1

More information about the U-Boot mailing list