[U-Boot] [PATCH] imx6: add Bachmann OT1200 board v2

[Christian Gmeiner]

Hi Stefano

> On 22/09/2014 13:57, Christian Gmeiner wrote:
> > This patch adds support for the OT1200 series of devices.
> >
> > Following components are used in u-boot:
> > + ethernet
> > + i2c
> > + emmc
> > + gpio
> >
> > For more details see README.
> >
> > Changes v1 > v2
>
> Can you also version your patches in the subject ? (aka: "[PATCH vX]
> imx6:..."). Rather patchwork makes some mess and it is not able to
> follow the versions, numbering helps - thanks !

Upps.

>
> There are some warnings reported by checkpatch, a couple opf them are
> due to line over 80 chars.
>
> Please fix warnings and repost, thanks !

Will do - thanks.

>
> >   - make use of enable_cspi_clock(..)
> >   - fix usage of OUTPUT_40OHM define
> >   - added README
> >
> > Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> > ---
> >  arch/arm/Kconfig                  |   4 +
> >  board/bachmann/ot1200/Kconfig     |  23 ++++
> >  board/bachmann/ot1200/MAINTAINERS |   6 +
> >  board/bachmann/ot1200/Makefile    |   9 ++
> >  board/bachmann/ot1200/README      |  20 +++
> >  board/bachmann/ot1200/ot1200.c    | 251 ++++++++++++++++++++++++++++++++++++++
> >  configs/ot1200_defconfig          |   3 +
> >  include/configs/ot1200.h          | 196 +++++++++++++++++++++++++++++
> >  8 files changed, 512 insertions(+)
> >  create mode 100644 board/bachmann/ot1200/Kconfig
> >  create mode 100644 board/bachmann/ot1200/MAINTAINERS
> >  create mode 100644 board/bachmann/ot1200/Makefile
> >  create mode 100644 board/bachmann/ot1200/README
> >  create mode 100644 board/bachmann/ot1200/ot1200.c
> >  create mode 100644 configs/ot1200_defconfig
> >  create mode 100644 include/configs/ot1200.h
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index 106aed9..8face21 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -414,6 +414,9 @@ config TARGET_HUMMINGBOARD
> >  config TARGET_TQMA6
> >       bool "TQ Systems TQMa6 board"
> >
> > +config TARGET_OT1200
> > +     bool "Bachmann OT1200"
> > +
> >  config OMAP34XX
> >       bool "OMAP34XX SoC"
> >
> > @@ -577,6 +580,7 @@ source "board/atmel/at91sam9rlek/Kconfig"
> >  source "board/atmel/at91sam9x5ek/Kconfig"
> >  source "board/atmel/sama5d3_xplained/Kconfig"
> >  source "board/atmel/sama5d3xek/Kconfig"
> > +source "board/bachmann/ot1200/Kconfig"
> >  source "board/balloon3/Kconfig"
> >  source "board/barco/titanium/Kconfig"
> >  source "board/bluegiga/apx4devkit/Kconfig"
> > diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig
> > new file mode 100644
> > index 0000000..55a825d
> > --- /dev/null
> > +++ b/board/bachmann/ot1200/Kconfig
> > @@ -0,0 +1,23 @@
> > +if TARGET_OT1200
> > +
> > +config SYS_CPU
> > +     string
> > +     default "armv7"
> > +
> > +config SYS_BOARD
> > +     string
> > +     default "ot1200"
> > +
> > +config SYS_VENDOR
> > +     string
> > +     default "bachmann"
> > +
> > +config SYS_SOC
> > +     string
> > +     default "mx6"
> > +
> > +config SYS_CONFIG_NAME
> > +     string
> > +     default "ot1200"
> > +
> > +endif
> > diff --git a/board/bachmann/ot1200/MAINTAINERS b/board/bachmann/ot1200/MAINTAINERS
> > new file mode 100644
> > index 0000000..ad75c24
> > --- /dev/null
> > +++ b/board/bachmann/ot1200/MAINTAINERS
> > @@ -0,0 +1,6 @@
> > +BACHMANN ELECTRONIC OT1200 BOARD
> > +M:   Christian Gmeiner <christian.gmeiner at gmail.com>
> > +S:   Maintained
> > +F:   board/bachmann/ot1200
> > +F:   include/configs/ot1200.h
> > +F:   configs/ot1200*_defconfig
> > diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile
> > new file mode 100644
> > index 0000000..1bd42e8
> > --- /dev/null
> > +++ b/board/bachmann/ot1200/Makefile
> > @@ -0,0 +1,9 @@
> > +#
> > +# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg at denx.de>
> > +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.
> > +# Copyright (C) 2013, Boundary Devices <info at boundarydevices.com>
> > +#
> > +# SPDX-License-Identifier:   GPL-2.0+
> > +#
> > +
> > +obj-y  := ot1200.o
> > diff --git a/board/bachmann/ot1200/README b/board/bachmann/ot1200/README
> > new file mode 100644
> > index 0000000..efcff11
> > --- /dev/null
> > +++ b/board/bachmann/ot1200/README
> > @@ -0,0 +1,20 @@
> > +U-Boot for the Bachmann electronic GmbH OT1200 devices
> > +
> > +There are two different versions of the base print,
>
> Do you mean here base board ?

We have two different PCBs .. I think I will go with this working or
even "printed circuit boards".
It looks like board will fit the best :)

greets
--
Christian Gmeiner, MSc

https://soundcloud.com/christian-gmeiner