October 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Oct 1 00:40:00 CEST 2014
Ending: Fri Oct 31 23:40:36 CET 2014
Messages: 3520

• [U-Boot] [PATCH 0/4] ARM: clean up declarations of public functions   Eric Nelson
• [U-Boot] [PATCH 1/4] ARM: prevent compiler warnings from bootm.c   Eric Nelson
• [U-Boot] [PATCH 2/4] ARM: i.MX6: include prototype for get_board_rev()   Eric Nelson
• [U-Boot] [PATCH 3/4] ARM: i.MX: provide declaration for board_spi_cs_gpio   Eric Nelson
• [U-Boot] [PATCH 4/4] ARM: i.MX video: declare displays and display_count publicly   Eric Nelson
• [U-Boot] [PATCH] stdio: staticize locally-used call-backs   Eric Nelson
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PATCH 1/4] dm: rpi: Convert GPIO driver to driver model   Stephen Warren
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Eric Nelson
• [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH 1/4] dm: rpi: Convert GPIO driver to driver model   Simon Glass
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH v3 26/29] dm: tegra: spi: Convert to driver model   Simon Glass
• [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Simon Glass
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   York Sun
• [U-Boot] [PATCH] arm, at91: add generic board support for the taurus and corvus board   Heiko Schocher
• [U-Boot] [PATCH] arm, at91: add spi dataflash support for the taurus board   Heiko Schocher
• [U-Boot] [PATCH v1 00/10] arm, at91, spl: add spl support for the taurus and corvus boards   Heiko Schocher
• [U-Boot] [PATCH v1 01/10] arm, at91, mpddrc: fix typo in ddr2_init()   Heiko Schocher
• [U-Boot] [PATCH v1 02/10] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45   Heiko Schocher
• [U-Boot] [PATCH v1 03/10] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define   Heiko Schocher
• [U-Boot] [PATCH v1 04/10] spl, nand: add option to boot raw u-boot.bin image only   Heiko Schocher
• [U-Boot] [PATCH v1 05/10] mtd: atmel_nand: add missign include   Heiko Schocher
• [U-Boot] [PATCH v1 06/10] spl, nand, atmel_nand: add erase one block function   Heiko Schocher
• [U-Boot] [PATCH v1 07/10] spl, mtd, nand, atmel_nand: invert device ready pin logic   Heiko Schocher
• [U-Boot] [PATCH v1 08/10] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Heiko Schocher
• [U-Boot] [PATCH v1 09/10] arm, at91, spl: add spl support for the taurus board   Heiko Schocher
• [U-Boot] [PATCH v1 10/10] arm, spl, at91: add spl support for the corvus board   Heiko Schocher
• [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Chin Liang See
• [U-Boot] [PATCH V2 01/51] net: Remove unused CONFIG_DW_SEARCH_PHY from configs   Chin Liang See
• [U-Boot] [PATCH 02/51] net: phy: Cleanup drivers/net/phy/micrel.c   Chin Liang See
• [U-Boot] [PATCH v3] imx6sx: Fix i.MX6SX HAB api function table offset   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f   Stefano Babic
• [U-Boot] [PATCH] wandboard: Select CONFIG_CMD_FUSE   Stefano Babic
• [U-Boot] [PATCH v4 1/5] mx6: crm_regs: Add bit definitions for anadig registers   Stefano Babic
• [U-Boot] [PATCH 03/51] net: dwc: Fix cache alignment issues   Chin Liang See
• [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c()   Stefano Babic
• [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Stefano Babic
• [U-Boot] [PATCH 04/51] net: dwc: Make the cache handling less cryptic   Chin Liang See
• [U-Boot] [PATCH 05/51] mmc: dw_mmc: cleanups   Chin Liang See
• [U-Boot] [PATCH 06/51] mmc: dw_mmc: Fix cache alignment issue   Chin Liang See
• [U-Boot] [PATCH 07/51] tools: socfpga: Add socfpga preloader signing to mkimage   Chin Liang See
• [U-Boot] [PATCH 08/51] arm: socfpga: Complete the list of base addresses   Chin Liang See
• [U-Boot] [PATCH 09/51] arm: socfpga: Clean up base address file   Chin Liang See
• [U-Boot] [PATCH V2 10/51] arm: socfpga: Add watchdog disable for socfpga   Chin Liang See
• [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes   Marek Vasut
• [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   Prafulla Wadaskar
• [U-Boot] [PATCH 03/51] net: dwc: Fix cache alignment issues   Marek Vasut
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Masahiro Yamada
• [U-Boot] [PATCH v4 1/5] mx6: crm_regs: Add bit definitions for anadig registers   Nitin Garg
• [U-Boot] [PATCH 06/51] mmc: dw_mmc: Fix cache alignment issue   Marek Vasut
• [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c()   Nikita Kiryanov
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Heiko Schocher
• [U-Boot] [PATCH 07/51] tools: socfpga: Add socfpga preloader signing to mkimage   Marek Vasut
• [U-Boot] [PATCH 08/51] arm: socfpga: Complete the list of base addresses   Marek Vasut
• [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Nikita Kiryanov
• [U-Boot] [PATCH V2 10/51] arm: socfpga: Add watchdog disable for socfpga   Marek Vasut
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PATCH v5] mx6: thermal: Check cpu temperature via thermal sensor   Nitin Garg
• [U-Boot] [PATCH v5] mx6: crm_regs: Add bit definitions for anadig registers   Nitin Garg
• [U-Boot] [PATCH] imx6: add Bachmann OT1200 board v2   Christian Gmeiner
• [U-Boot] [PATCH v5] mx6: crm_regs: Add bit definitions for anadig registers   Fabio Estevam
• [U-Boot] [PATCH v5] mx6: crm_regs: Add bit definitions for anadig registers   Nitin Garg
• [U-Boot] [PATCH v5 0/5] add i.MX6 thermal sensor driver   Nitin Garg
• [U-Boot] [PATCH v5 1/5] mx6: crm_regs: Add bit definitions for anadig registers   Nitin Garg
• [U-Boot] [PATCH v5 2/5] mx6: clock: Add api to enable pll3   Nitin Garg
• [U-Boot] [PATCH v5 3/5] mx6: thermal: Add i.MX6 CPU thermal sensor support   Nitin Garg
• [U-Boot] [PATCH v5 4/5] mx6: thermal: Check cpu temperature via thermal sensor   Nitin Garg
• [U-Boot] [PATCH v5 5/5] mx6: thermal: Enable thermal sensor for mx6 sabre boards.   Nitin Garg
• [U-Boot] [PATCH] sunxi: Add support for the Mele M3 board   Hans de Goede
• [U-Boot] [PATCH] arm, at91: add spi dataflash support for the taurus board   Jagan Teki
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   Simon Glass
• [U-Boot] [PATCH 0/2 v3] arm: socfpga: Add Cadence QSPI support   Stefan Roese
• [U-Boot] [PATCH 1/4 v3] spi: Add Cadence QSPI driver used by SoCFPGA   Stefan Roese
• [U-Boot] [PATCH 2/4 v3] arm: socfpga: Add Cadence QSPI support to config header   Stefan Roese
• [U-Boot] [PATCH 3/4 v3] arm: socfpga: Don't define CONFIG_SPI_FLASH_QUAD   Stefan Roese
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Stefan Roese
• [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] [PATCH] multiconfig.sh: replace GNU sed specific match   Jeroen Hofstee
• [U-Boot] [PATCH v3 07/11] imx: Add error checking to setup_i2c()   Simon Glass
• [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   Simon Glass
• [U-Boot] [PATCH v2] kconfig: show an error message when defconfig is not found   York Sun
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Simon Glass
• [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard   Jeroen Hofstee
• [U-Boot] [GENERIC_BOARD] env problems before relocation with ppc8360   York Sun
• [U-Boot] Please increase the image size for km boards   Valentin Longchamp
• [U-Boot] [PATCH v2] kconfig: show an error message when defconfig is not found   Masahiro YAMADA
• [U-Boot] Please increase the image size for km boards   York Sun
• [U-Boot] [PATCH] scripts/multiconfig.sh: Fix a typo   York Sun
• [U-Boot] [PATCH] multiconfig.sh: replace GNU sed specific match   Masahiro YAMADA
• [U-Boot] [PATCH] scripts/multiconfig.sh: Fix a typo   Masahiro YAMADA
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   York Sun
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Masahiro YAMADA
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   Simon Glass
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   York Sun
• [U-Boot] Boot reason in SPL for OMAP4   Tom Rini
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Hendrik
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   Simon Glass
• [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   York Sun
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Marek Vasut
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Jagan Teki
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Stefan Roese
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Jagan Teki
• [U-Boot] Boot reason in SPL for OMAP4   Gregoire Gentil
• [U-Boot] u-boot compilation broken for OMAP4 if no USB_HOST_ETHER   Gregoire Gentil
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Stefan Roese
• [U-Boot] [PATCH 1/3] usb: gadget: fastboot: add max-download-size variable   Steve Rae
• [U-Boot] [PATCH 2/3] usb: gadget: fastboot: explicitly set radix of maximum download size   Steve Rae
• [U-Boot] [PATCH 3/3] usb: gadget: fastboot: terminate commands with NULL   Steve Rae
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Steve Rae
• [U-Boot] [PATCH 3/3] usb: gadget: fastboot: terminate commands with NULL   Eric Nelson
• [U-Boot] [PATCH V2 3/3] usb: gadget: fastboot: terminate commands with NULL   Eric Nelson
• [U-Boot] converting BeagleBone Black to use config_distro_bootcmd   Vagrant Cascadian
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Pavel Machek
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Simon Glass
• [U-Boot] [PATCH v1 06/10] spl, nand, atmel_nand: add erase one block function   Scott Wood
• [U-Boot] [PATCH] nitrogen6x: Update DDR timings for 2G memory arrangement   Eric Nelson
• [U-Boot] [PATCH v4 0/9] dm: imx: Add driver model support for GPIO and serial on cm_fx6   Simon Glass
• [U-Boot] [PATCH v4 1/9] dm: linker_lists: Add a way to declare multiple objects   Simon Glass
• [U-Boot] [PATCH v4 2/9] dm: core: Allow a list of devices to be declared in one step   Simon Glass
• [U-Boot] [PATCH v4 3/9] initcall: Display error number when an error occurs   Simon Glass
• [U-Boot] [PATCH v4 4/9] dm: serial: Put common code into separate functions   Simon Glass
• [U-Boot] [PATCH v4 5/9] imx: Add error checking to setup_i2c()   Simon Glass
• [U-Boot] [PATCH v4 6/9] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] [PATCH v4 7/9] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
• [U-Boot] [PATCH v4 8/9] dm: imx: serial: Support driver model in the MXC serial driver   Simon Glass
• [U-Boot] [PATCH v4 9/9] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
• [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Minkyu Kang
• [U-Boot] [PATCH v4 0/9] dm: imx: Add driver model support for GPIO and serial on cm_fx6   Simon Glass
• [U-Boot] [PATCH v4 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   Scott Wood
• [U-Boot] [PATCH 1/3] usb: gadget: fastboot: add max-download-size variable   Marek Vasut
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Marek Vasut
• [U-Boot] Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 broke mpc85xx   York Sun
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH v5 01/15] Exynos: Use 900MHz ARM frequency in SPL for peach_pit   Simon Glass
• [U-Boot] [PATCH v5 02/15] exynos5: Enable data cache   Simon Glass
• [U-Boot] [PATCH v5 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
• [U-Boot] [PATCH v5 04/15] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
• [U-Boot] [PATCH v5 05/15] dm: exynos: Split out the cros_ec drivers   Simon Glass
• [U-Boot] [PATCH v5 06/15] exynos: dts: Add device tree node for cros_ec keyboard   Simon Glass
• [U-Boot] [PATCH v5 07/15] exynos: Rename -dt config files to -common   Simon Glass
• [U-Boot] [PATCH v5 08/15] exynos: Move common exynos settings into a common file   Simon Glass
• [U-Boot] [PATCH v5 09/15] exynos: Move common smdk5420 things to common file   Simon Glass
• [U-Boot] [PATCH v5 10/15] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
• [U-Boot] [PATCH v5 11/15] config: Move arndale to use common exynos5250 file   Simon Glass
• [U-Boot] [PATCH v5 12/15] config: Move smdkv310 to use common exynos4 file   Simon Glass
• [U-Boot] [PATCH v5 13/15] samsung: Enable device tree for s5p_goni   Simon Glass
• [U-Boot] [PATCH v5 14/15] samsung: Enable device tree for smdkc100   Simon Glass
• [U-Boot] [PATCH v5 15/15] exynos: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Masahiro Yamada
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Masahiro Yamada
• [U-Boot] [PATCH v1 06/10] spl, nand, atmel_nand: add erase one block function   Heiko Schocher
• [U-Boot] [PATCH] arm, at91: add spi dataflash support for the taurus board   Heiko Schocher
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Stefan Roese
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Stefan Agner
• [U-Boot] [PATCH] sunxi: Add support for the Mele M3 board   Ian Campbell
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Albert ARIBAUD
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Albert ARIBAUD
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Masahiro Yamada
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Pavel Machek
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Heiko Schocher
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
• [U-Boot] UBI issues on SAMA5D31 NOR flash   Andy Pont
• [U-Boot] [PATCH] mmc: set correct block size value in bfin sdh driver   Pantelis Antoniou
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Albert ARIBAUD
• [U-Boot] Please sync u-boot-arm/master with u-boot/master   Masahiro Yamada
• [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Nikita Kiryanov
• [U-Boot] [PATCH] mmc: fix ERASE_GRP_DEF handling   Pantelis Antoniou
• [U-Boot] [PATCH 2/2] mmc: restore capacity when switching to partition 0   Pantelis Antoniou
• [U-Boot] [PATCH v3] env_mmc: correct fini partition to match init partition   Pantelis Antoniou
• [U-Boot] [PATCH v2] mvebu_mmc: Driver addition   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: Fix mmc bus width   Pantelis Antoniou
• [U-Boot] [RFC PATCH 4/4 v3] mtd: sf: Add CONFIG_SPI_N25Q256A_RESET for software-reset   Marek Vasut
• [U-Boot] [PATCH v3] imx6: add Bachmann OT1200 board   Christian Gmeiner
• [U-Boot] [PATCH v3] imx6: add Bachmann OT1200 board   Masahiro Yamada
• [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH v1 2/2] odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] Boot reason in SPL for OMAP4   Tom Rini
• [U-Boot] [PATCH v4 9/9] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Nikita Kiryanov
• [U-Boot] [PATCH 0/2] Split "dm: imx: Use gpio_request() to request GPIOs"   Nikita Kiryanov
• [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs   Nikita Kiryanov
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Nikita Kiryanov
• [U-Boot] [PATCH v4 6/9] dm: imx: Use gpio_request() to request GPIOs   Nikita Kiryanov
• [U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings   Przemyslaw Marczak
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH] tegra20: display: Add support for flipped panels   Alban Bedel
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Marcel Ziswiler
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [U-boot] [Patch 0/5] keystone_net: use MDIO bus and eth PHY frameworks   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/5] net: phy: print a number of phy that is not found   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/5] net: keystone_net: use mdio_reset function   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/5] net: keystone_net: register MDIO bus   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/5] net: keystone_net: register eth PHYs on MDIO bus   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 5/5] net: keystone_net: use general get link function   Ivan Khoronzhuk
• [U-Boot] [PATCH v3 08/11] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] Call for participation in the U-Boot Mini Summit 2014   Detlev Zundel
• [U-Boot] [PATCH v4 6/9] dm: imx: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Marcel Ziswiler
• [U-Boot] [U-boot] [Patch 0/5] keystone2: add network support for K2E SoC and EVM   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/5] ARM: keystone2: keysonte_nav: add support for K2E SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/5] net: keystone_serdes: add keystone K2E SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/5] net: keystone_net: add Keystone2 K2E SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/5] net: keystone_net: increase PHY auto negotiate time   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 5/5] board: k2e_evm: add network support   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/3] usb: gadget: fastboot: add max-download-size variable   Steve Rae
• [U-Boot] U-Boot Mini Summit   Detlev Zundel
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Simon Glass
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Simon Glass
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Simon Glass
• [U-Boot] [PATCH 00/32] ARM: i.MX: nitrogen6x clean up   Eric Nelson
• [U-Boot] [PATCH 01/32] nitrogen6x: implement board_cfb_skip() to disable text output   Eric Nelson
• [U-Boot] [PATCH 02/32] nitrogen6x: simplify board_mmc_getcd   Eric Nelson
• [U-Boot] [PATCH 03/32] nitrogen6x: configure SD2 pads for SDIO on USDHC2   Eric Nelson
• [U-Boot] [PATCH 04/32] nitrogen6x: power-down miscellanous peripherals   Eric Nelson
• [U-Boot] [PATCH 05/32] nitrogen6x: configure SGTL5000, CSI camera clock outputs   Eric Nelson
• [U-Boot] [PATCH 06/32] nitrogen6x: staticize board file   Eric Nelson
• [U-Boot] [PATCH 07/32] nitrogen6x: Allow U-Boot to be silent on UART2   Eric Nelson
• [U-Boot] [PATCH 08/32] nitrogen6x: phy: add 100 us delay after phy reset   Eric Nelson
• [U-Boot] [PATCH 09/32] nitrogen6x: prevent warnings about board_ehci* callbacks   Eric Nelson
• [U-Boot] [PATCH 10/32] nitrogen6x: display: add support lvds jeida screen   Eric Nelson
• [U-Boot] [PATCH 11/32] nitrogen6x: display: add qvga panel   Eric Nelson
• [U-Boot] [PATCH 12/32] nitrogen6x: display: add support for LG-9.7 LVDS display   Eric Nelson
• [U-Boot] [PATCH 13/32] nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays   Eric Nelson
• [U-Boot] [PATCH 14/32] nitrogen6x: display: add support for fusion 7 display   Eric Nelson
• [U-Boot] [PATCH 15/32] nitrogen6x: display: add svga display (800x600)   Eric Nelson
• [U-Boot] [PATCH 16/32] nitrogen6x: display: add Ampire 1024x600 panel   Eric Nelson
• [U-Boot] [PATCH 17/32] nitrogen6x: display: add wvga-lvds panel   Eric Nelson
• [U-Boot] [PATCH 18/32] nitrogen6x: display use I2C detect for HDMI   Eric Nelson
• [U-Boot] [PATCH 19/32] nitrogen6x: config: add USB Mass Storage (ums) support   Eric Nelson
• [U-Boot] [PATCH 20/32] nitrogen6x: config: allow boot to USB stick   Eric Nelson
• [U-Boot] [PATCH 21/32] nitrogen6x: config: use FS_GENERIC load command   Eric Nelson
• [U-Boot] [PATCH 22/32] nitrogen6x: config: add initrd_high   Eric Nelson
• [U-Boot] [PATCH 23/32] nitrogen6x: config: expose SATA, then MMC over USB   Eric Nelson
• [U-Boot] [PATCH 24/32] nitrogen6x: config: enable USB keyboard support   Eric Nelson
• [U-Boot] [PATCH 25/32] nitrogen6x: config: add CONFIG_CMD_MEMTEST   Eric Nelson
• [U-Boot] [PATCH 26/32] nitrogen6x: config: enable "i2c edid"   Eric Nelson
• [U-Boot] [PATCH 27/32] nitrogen6x: config: allow more bootargs parameters   Eric Nelson
• [U-Boot] [PATCH 28/32] nitrogen6x: config: disable logo   Eric Nelson
• [U-Boot] [PATCH 29/32] nitrogen6x: config: configure usb_ether   Eric Nelson
• [U-Boot] [PATCH 30/32] nitrogen6x: config: add gpio command   Eric Nelson
• [U-Boot] [PATCH 31/32] nitrogen6x: config: enable Android fastboot   Eric Nelson
• [U-Boot] [PATCH 32/32] nitrogen6x: config: enable EXT4 filesystem   Eric Nelson
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Simon Glass
• [U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings   Albert ARIBAUD
• [U-Boot] U-Boot Mini Summit   Albert ARIBAUD
• [U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH] common/board_r: Fix booting issue on T4240QDS   York Sun
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Stephen Warren
• [U-Boot] [PATCH v1 06/10] spl, nand, atmel_nand: add erase one block function   Scott Wood
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Marcel Ziswiler
• [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Scott Wood
• [U-Boot] converting BeagleBone Black to use config_distro_bootcmd   Simon Glass
• [U-Boot] [PATCH] board/BuR: fix pinmux for MII Ethernet Interface   Hannes Petermaier
• [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs   Igor Grinberg
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Igor Grinberg
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Marcel Ziswiler
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Igor Grinberg
• [U-Boot] U-boot for samsung peach-pi (chromebook 2 13")   Sjoerd Simons
• [U-Boot] [PATCH] sunxi: Add support for the Mele M3 board   Hans de Goede
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Hans de Goede
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Siarhei Siamashka
• [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL   Luca Ellero
• [U-Boot] [PATCH] common/board_r: remove warning in initr_mem for 64-bit phys_size_t   Valentin Longchamp
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Hans de Goede
• [U-Boot] [PATCH 1/2] powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()   Valentin Longchamp
• [U-Boot] [PATCH 2/2] keymile/powerpc: move to the architecture-generic board system   Valentin Longchamp
• [U-Boot] [PATCH] km_arm: convert the km_arm boards to the generic board support   Valentin Longchamp
• [U-Boot] [PATCH v6 0/7] Add support for Panasonic UniPhier SoCs/boards   Masahiro Yamada
• [U-Boot] [PATCH v6 1/7] mtd: denali: add Denali controller configs to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 2/7] mtd: denali: add Denali NAND driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH v6 3/7] serial: add UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH v6 4/7] ARM: UniPhier: add UniPhier SoC support code   Masahiro Yamada
• [U-Boot] [PATCH v6 5/7] ARM: UniPhier: add Kconfig and defconfig   Masahiro Yamada
• [U-Boot] [PATCH v6 6/7] MAINTAINERS: add me as a maintainer of UniPhier platform   Masahiro Yamada
• [U-Boot] [PATCH v6 7/7] git-mailrc: add me as a maintainer of UniPhier platform   Masahiro Yamada
• [U-Boot] [PATCH 0/2] Two bug fixes of Denali NAND controller driver   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mtd: denali: fix NAND_CMD_PARAM command   Masahiro Yamada
• [U-Boot] [PATCH 2/2] mtd: denali: support NAND_CMD_RNDOUT command   Masahiro Yamada
• [U-Boot] [PATCH v3 00/10] ARM: sunxi: Add basic support for Allwinner A31 (sun6i)   Chen-Yu Tsai
• [U-Boot] [PATCH v3 01/10] ARM: sunxi: Use macro values for setting UART GPIO pull-ups   Chen-Yu Tsai
• [U-Boot] [PATCH v3 02/10] ARM: sunxi: Fix build break when CONFIG_USB_EHCI is not defined   Chen-Yu Tsai
• [U-Boot] [PATCH v3 03/10] ARM: sun6i: Add base address for the new controllers in A31   Chen-Yu Tsai
• [U-Boot] [PATCH v3 04/10] ARM: sun6i: Add support for the power reset control module found on the A31   Chen-Yu Tsai
• [U-Boot] [PATCH v3 05/10] ARM: sun6i: Add clock support   Chen-Yu Tsai
• [U-Boot] [PATCH v3 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Chen-Yu Tsai
• [U-Boot] [PATCH v3 07/10] ARM: sun6i: Define UART0 pins for A31   Chen-Yu Tsai
• [U-Boot] [PATCH v3 08/10] ARM: sun6i: Setup the A31 UART0 muxing   Chen-Yu Tsai
• [U-Boot] [PATCH v3 09/10] ARM: sunxi: Add basic A31 support   Chen-Yu Tsai
• [U-Boot] [PATCH v3 10/10] ARM: sun6i: Add Colombus board defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH v3 10/10] ARM: sun6i: Add Colombus board defconfig   Maxime Ripard
• [U-Boot] How does Driver Model UART work?   Masahiro Yamada
• [U-Boot] [PATCH v3 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
• [U-Boot] How does Driver Model UART work?   Masahiro Yamada
• [U-Boot] [PATCH v3 10/10] ARM: sun6i: Add Colombus board defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH for-v2014.10?] pxe: Ensure we don't overflow bootargs   Ian Campbell
• [U-Boot] [PATCH] make mxsldr behave like sb_loader.exe   Jacob Kjaergaard
• [U-Boot] [PATCH] add option to send a last interrupt transfer.   Jacob Kjaergaard
• [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL   Fabio Estevam
• [U-Boot] How does Driver Model UART work?   Simon Glass
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Simon Glass
• [U-Boot] [PATCH] cmd_mmc: fix bootpart-resize maxarg to 4   Pantelis Antoniou
• [U-Boot] iMX6 Device Tree: status of CONFIG_OF_CONTROL   Luca Ellero
• [U-Boot] Pull request: u-boot-mmc 03102014   Pantelis Antoniou
• [U-Boot] [PATCH 0/6] sunxi: Add second sdcard slot support, including eMMC boot   Hans de Goede
• [U-Boot] [PATCH 1/6] sunxi: Add sunxi_gpio_get_val function   Hans de Goede
• [U-Boot] [PATCH 2/6] sunxi: Add mmc card-detect functionality   Hans de Goede
• [U-Boot] [PATCH 3/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Hans de Goede
• [U-Boot] [PATCH 4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Hans de Goede
• [U-Boot] [PATCH 6/6] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Stephen Warren
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Marcel Ziswiler
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Stephen Warren
• [U-Boot] [PATCH 0/2] e1000: add i210 support   York Sun
• [U-Boot] [PATCH] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Marcel Ziswiler
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Tom Warren
• [U-Boot] Seeing only 256MB of RAM   John Tobias
• [U-Boot] Seeing only 256MB of RAM   John Tobias
• [U-Boot] [PATCH] am335x_evm: Correct BOOTCOUNT driver support   Tom Rini
• [U-Boot] [PATCH v3 10/10] ARM: sun6i: Add Colombus board defconfig   Ian Campbell
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Makefile: allow for spl builds with env_fat   Felipe Balbi
• [U-Boot] [PATCH 0/2 v3] arm: socfpga: Add Cadence QSPI support   Marek Vasut
• [U-Boot] [PATCH 0/2] e1000: add i210 support   Marek Vasut
• [U-Boot] [RFC PATCH 0/7] Switch am335x_evm.h based boards to use config_distro_bootcmd.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 1/7] Allow checking in multiple partitions for scan_dev_for_boot.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 2/7] Allow overriding boot_partitions default value by setting BOOTENV_BOOT_PARTITIONS before including config_distro_bootcmd.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 3/7] Add BOOTENV_INIT_COMMAND for commands that may be needed to run before bootcmd, such as setting the fdt file variables for platfroms that detect on boot.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 4/7] Add BOOTENV_POST_COMMAND, which is appended to the end of bootcmd.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 5/7] Only set CONFIG_BOOTDELAY if not already set.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 6/7] Add support for loading environment from uEnv.txt in config_distro_bootcmd.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 7/7] Switch am335x_evm.h to use config_distro_defaults and config_distro_bootcmd. Add scriptaddr to DEFAULT_LINUX_BOOT_ENV, as scriptaddr is used for boot scripts in config_distro_bootcmd.   Vagrant Cascadian
• [U-Boot] [PATCH] usb: tegra: ULPI regression on tegra20   Marcel Ziswiler
• [U-Boot] [PATCH] mmc: Tegra: Fix timeout issue seen on certain eMMC parts   Marcel Ziswiler
• [U-Boot] [PATCH 0/2] e1000: add i210 support   York Sun
• [U-Boot] [Question] Driver-Model UART on NOR-boot ? Work?   Simon Glass
• [U-Boot] [PATCH v3 09/10] kconfig: move CONFIG_OF_* to Kconfig   Simon Glass
• [U-Boot] [PATCH] common/board_r: Fix booting issue on T4240QDS   Simon Glass
• [U-Boot] [PATCH] common/board_r: Fix booting issue on T4240QDS   York Sun
• [U-Boot] [PATCH] common/board_r: Fix booting issue on T4240QDS   Scott Wood
• [U-Boot] [PATCH] patman: Explain how to make doc/git-mailrc work   Simon Glass
• [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Simon Glass
• [U-Boot] [PATCH] common/board_r: remove warning in initr_mem for 64-bit phys_size_t   Simon Glass
• [U-Boot] [PATCH] spi:ls102xqds:Support for compatibility for QSPI and DSPI modules drivers   Simon Glass
• [U-Boot] [PATCH 1/6] sunxi: Add sunxi_gpio_get_val function   Ian Campbell
• [U-Boot] [PATCH 2/6] sunxi: Add mmc card-detect functionality   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Ian Campbell
• [U-Boot] [PATCH 4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Ian Campbell
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Ian Campbell
• [U-Boot] [PATCH 6/6] sunxi: Enable second sdcard slot found on some boards   Ian Campbell
• [U-Boot] [PATCH 6/6] sunxi: Enable second sdcard slot found on some boards   Ian Campbell
• [U-Boot] [PATCH for-next 0/3] sunxi: Kconfig consolidation and cleanup   Ian Campbell
• [U-Boot] [PATCH for-next 1/3] sunxi: Kconfig: Consolidate SYS_CONFIG_NAME settings   Ian Campbell
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Ian Campbell
• [U-Boot] [PATCH for-next 3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option   Ian Campbell
• [U-Boot] [PATCH 1/4] Add snoop disable for slave port 0, port 1 and port 2   Albert ARIBAUD
• [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Albert ARIBAUD
• [U-Boot] [PATCH for-next 0/3] sunxi: Kconfig consolidation and cleanup   Ian Campbell
• [U-Boot] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i   Chen-Yu Tsai
• [U-Boot] [PATCH 1/3] ARM: sunxi: Move watchdog register definitions to separate file   Chen-Yu Tsai
• [U-Boot] [PATCH 2/3] ARM: sunxi: Add sun6i/sun8i timer block register definition   Chen-Yu Tsai
• [U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i   Chen-Yu Tsai
• [U-Boot] How does Driver Model UART work?   Masahiro YAMADA
• [U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i   Julian Calaby
• [U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i   Chen-Yu Tsai
• [U-Boot] U-Boot Mini Summit   Masahiro YAMADA
• [U-Boot] U-Boot Mini Summit   Michael Trimarchi
• [U-Boot] Pull request: u-boot-mmc 03102014   Tom Rini
• [U-Boot] [PATCH 1/2] common: Makefile: allow for spl builds with env_fat   Tom Rini
• [U-Boot] How does Driver Model UART work?   Simon Glass
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH 01/23] dm: sunxi: dts: Add sun7i device tree files   Simon Glass
• [U-Boot] [PATCH 02/23] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [PATCH 03/23] dm: core: Add support for simple-bus   Simon Glass
• [U-Boot] [PATCH 04/23] dm: sunxi: Add pinmux functions which take a bank parameter   Simon Glass
• [U-Boot] [PATCH 05/23] dm: sunxi: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH 06/23] dm: sunxi: Modify the GPIO driver to support driver model   Simon Glass
• [U-Boot] [PATCH 07/23] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH 08/23] dm: gpio: Implement GPIO reservation in the uclass   Simon Glass
• [U-Boot] [PATCH 09/23] dm: gpio: Add gpio_get_function() and friends   Simon Glass
• [U-Boot] [PATCH 10/23] dm: Move the function for getting GPIO status into the uclass   Simon Glass
• [U-Boot] [PATCH 11/23] dm: gpio: sandbox: Implement the get_function() method   Simon Glass
• [U-Boot] [PATCH 12/23] dm: gpio: sandbox: Implement the remove() method   Simon Glass
• [U-Boot] [PATCH 13/23] dm: gpio: sandbox: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 14/23] test: dm: Update GPIO tests for new gpio_request() method   Simon Glass
• [U-Boot] [PATCH 15/23] dm: gpio: Add gpio_requestf() helper for printf() strings   Simon Glass
• [U-Boot] [PATCH 16/23] test: dm: Support memory leak checking as a core feature   Simon Glass
• [U-Boot] [PATCH 17/23] test: dm: Add additional GPIO tests   Simon Glass
• [U-Boot] [PATCH 18/23] dm: gpio: tegra: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 19/23] dm: gpio: omap3: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 20/23] dm: gpio: rpi_b: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 21/23] dm: gpio: exynos: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 22/23] dm: gpio: imx: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 23/23] dm: gpio: Remove unused get_state() uclass method   Simon Glass
• [U-Boot] [PATCH] mx6sxsabresd: Fix PCI reset and power GPIO assignments   Fabio Estevam
• [U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i   Julian Calaby
• [U-Boot] [PATCH 06/23] dm: sunxi: Modify the GPIO driver to support driver model   Chen-Yu Tsai
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Chen-Yu Tsai
• [U-Boot] [PATCH v6 1/7] mtd: denali: add Denali controller configs to Kconfig   Masahiro YAMADA
• [U-Boot] [PATCH v6 2/7] mtd: denali: add Denali NAND driver for SPL   Masahiro YAMADA
• [U-Boot] [PATCH v6 3/7] serial: add UniPhier serial driver   Masahiro YAMADA
• [U-Boot] [PATCH v6 4/7] ARM: UniPhier: add UniPhier SoC support code   Masahiro YAMADA
• [U-Boot] [PATCH v6 6/7] MAINTAINERS: add me as a maintainer of UniPhier platform   Masahiro YAMADA
• [U-Boot] [PATCH v6 5/7] ARM: UniPhier: add Kconfig and defconfig   Masahiro YAMADA
• [U-Boot] [PATCH v6 7/7] git-mailrc: add me as a maintainer of UniPhier platform   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro YAMADA
• [U-Boot] [PATCH 1/4] ahci: Don't start command DMA engine before buffers are set   Ian Campbell
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Igor Grinberg
• [U-Boot] [PATCH 1/6] sunxi: Add sunxi_gpio_get_val function   Hans de Goede
• [U-Boot] [PATCH 07/23] dm: sunxi: Add support for serial using driver model   Chen-Yu Tsai
• [U-Boot] [PATCH 2/6] sunxi: Add mmc card-detect functionality   Hans de Goede
• [U-Boot] [PATCH 3/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Hans de Goede
• [U-Boot] [PATCH 4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH] tftp: Displace check for server ip   Maxime Hadjinlian
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   thomas.langer at lantiq.com
• [U-Boot] [PATCH 3/4] dm: do not check dm_root before searching in uclass_root   Simon Glass
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Simon Glass
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH fix for v2014.10 0/1] sunxi: Fix gmac not working reliable on the Bananapi   Karsten Merker
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Marek Vasut
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   thomas.langer at lantiq.com
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Marek Vasut
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Marek Vasut
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Marek Vasut
• [U-Boot] [PATCH] lsxl: convert to generic board and fix typo   Michael Walle
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Masahiro Yamada
• [U-Boot] [PATCH for-next 0/3] sunxi: Kconfig consolidation and cleanup   Masahiro Yamada
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Igor Grinberg
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Baruch Siach
• [U-Boot] [PATCH v3] imx6: add Bachmann OT1200 board   Christian Gmeiner
• [U-Boot] [PATCH for-next 1/3] sunxi: Kconfig: Consolidate SYS_CONFIG_NAME settings   Hans de Goede
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Hans de Goede
• [U-Boot] [PATCH for-next 3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option   Hans de Goede
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Stefan Roese
• [U-Boot] [PATCH for-next 0/3] sunxi: Kconfig consolidation and cleanup   Ian Campbell
• [U-Boot] [PATCH for-next 1/3] sunxi: Kconfig: Consolidate SYS_CONFIG_NAME settings   Ian Campbell
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Ian Campbell
• [U-Boot] [PATCH for-next 3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Ian Campbell
• [U-Boot] [PATCH 4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Ian Campbell
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Hans de Goede
• [U-Boot] [PATCH 6/6] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Ian Campbell
• [U-Boot] [PATCH for-next 3/3] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option   Hans de Goede
• [U-Boot] [PATCH] mx6sxsabresd: Fix PCI reset and power GPIO assignments   Stefano Babic
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Lukasz Majewski
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Masahiro Yamada
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Baruch Siach
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash master   Stefan Roese
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Heiko Schocher
• [U-Boot] [PATCH] arm: goni: add i2c_init_board()   Robert Baldyga
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Thierry Reding
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] Please pull u-boot-cfi-flash master   Tom Rini
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   Ashish Kumar
• [U-Boot] [PATCH] lsxl: convert to generic board and fix typo   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Hendrik
• [U-Boot] [PATCH 4/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH] usb: tegra: ULPI regression on tegra20   Marek Vasut
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Hans de Goede
• [U-Boot] [PATCH] mx6sxsabresd: Fix PCI reset and power GPIO assignments   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: Update DDR timings for 2G memory arrangement   Stefano Babic
• [U-Boot] [PATCH 1/2] arm: m28evk: Zap superfluous tab in env   Stefano Babic
• [U-Boot] [PATCH 2/2] arm: m53evk: Zap superfluous tab in env   Stefano Babic
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v3] imx6: add Bachmann OT1200 board   Stefano Babic
• [U-Boot] [PATCH 00/32] ARM: i.MX: nitrogen6x clean up   Stefano Babic
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PULL] u-boot-socfpga/topic/drivers/fpga-20141006   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/topic/drivers/mmc-20141006   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/topic/drivers/net-20141006   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/topic/tools/mkimage-20141006   Marek Vasut
• [U-Boot] am335x: using GPIO1 pins as input   Yegor Yefremov
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/cache-20141006   Marek Vasut
• [U-Boot] [PATCH 07/32] nitrogen6x: Allow U-Boot to be silent on UART2   Stefano Babic
• [U-Boot] [PATCH 5/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Ian Campbell
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Eric Nelson
• [U-Boot] [PATCH 28/32] nitrogen6x: config: disable logo   Stefano Babic
• [U-Boot] [PATCH 07/32] nitrogen6x: Allow U-Boot to be silent on UART2   Eric Nelson
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141006   Marek Vasut
• [U-Boot] [PATCH 29/32] nitrogen6x: config: configure usb_ether   Stefano Babic
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH 01/32] nitrogen6x: implement board_cfb_skip() to disable text output   Stefano Babic
• [U-Boot] [PATCH 02/32] nitrogen6x: simplify board_mmc_getcd   Stefano Babic
• [U-Boot] [PATCH 03/32] nitrogen6x: configure SD2 pads for SDIO on USDHC2   Stefano Babic
• [U-Boot] [PATCH 04/32] nitrogen6x: power-down miscellanous peripherals   Stefano Babic
• [U-Boot] [PATCH 05/32] nitrogen6x: configure SGTL5000, CSI camera clock outputs   Stefano Babic
• [U-Boot] [PATCH 06/32] nitrogen6x: staticize board file   Stefano Babic
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH 08/32] nitrogen6x: phy: add 100 us delay after phy reset   Stefano Babic
• [U-Boot] [PATCH 09/32] nitrogen6x: prevent warnings about board_ehci* callbacks   Stefano Babic
• [U-Boot] [PATCH 10/32] nitrogen6x: display: add support lvds jeida screen   Stefano Babic
• [U-Boot] [PATCH 11/32] nitrogen6x: display: add qvga panel   Stefano Babic
• [U-Boot] [PATCH 13/32] nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays   Stefano Babic
• [U-Boot] [PATCH 12/32] nitrogen6x: display: add support for LG-9.7 LVDS display   Stefano Babic
• [U-Boot] [PATCH 14/32] nitrogen6x: display: add support for fusion 7 display   Stefano Babic
• [U-Boot] [PATCH 15/32] nitrogen6x: display: add svga display (800x600)   Stefano Babic
• [U-Boot] [PATCH 16/32] nitrogen6x: display: add Ampire 1024x600 panel   Stefano Babic
• [U-Boot] [PATCH 17/32] nitrogen6x: display: add wvga-lvds panel   Stefano Babic
• [U-Boot] [PATCH 18/32] nitrogen6x: display use I2C detect for HDMI   Stefano Babic
• [U-Boot] [PATCH 19/32] nitrogen6x: config: add USB Mass Storage (ums) support   Stefano Babic
• [U-Boot] [PATCH 20/32] nitrogen6x: config: allow boot to USB stick   Stefano Babic
• [U-Boot] [PATCH 21/32] nitrogen6x: config: use FS_GENERIC load command   Stefano Babic
• [U-Boot] [PATCH 22/32] nitrogen6x: config: add initrd_high   Stefano Babic
• [U-Boot] [PATCH 23/32] nitrogen6x: config: expose SATA, then MMC over USB   Stefano Babic
• [U-Boot] [PATCH 24/32] nitrogen6x: config: enable USB keyboard support   Stefano Babic
• [U-Boot] [PATCH 25/32] nitrogen6x: config: add CONFIG_CMD_MEMTEST   Stefano Babic
• [U-Boot] [PATCH 26/32] nitrogen6x: config: enable "i2c edid"   Stefano Babic
• [U-Boot] [PATCH 27/32] nitrogen6x: config: allow more bootargs parameters   Stefano Babic
• [U-Boot] [PATCH 28/32] nitrogen6x: config: disable logo   Stefano Babic
• [U-Boot] [PATCH 30/32] nitrogen6x: config: add gpio command   Stefano Babic
• [U-Boot] [PATCH 31/32] nitrogen6x: config: enable Android fastboot   Stefano Babic
• [U-Boot] [PATCH 32/32] nitrogen6x: config: enable EXT4 filesystem   Stefano Babic
• [U-Boot] [PATCH] cfi_flash: don't hide write/erase errors   Edward L Swarthout
• [U-Boot] [PATCH 29/32] nitrogen6x: config: configure usb_ether   Eric Nelson
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Hendrik
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Lukasz Majewski
• [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   Andy Pont
• [U-Boot] [PATCH v2 0/5] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH v2 1/5] sunxi: Add mmc card-detect functionality   Hans de Goede
• [U-Boot] [PATCH v2 2/5] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Hans de Goede
• [U-Boot] [PATCH v2 3/5] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH v2 4/5] sunxi: Use PG3 - PG8 as io-pins for mmc1   Hans de Goede
• [U-Boot] [PATCH v2 5/5] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH 0/7] dm: Introduce driver model for Atmel at91   Simon Glass
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Simon Glass
• [U-Boot] [PATCH 2/7] dm: at91: Move snapper9260 to generic baord   Simon Glass
• [U-Boot] [PATCH 3/7] dm: at91: Add driver model support for atmel GPIO driver   Simon Glass
• [U-Boot] [PATCH 4/7] dm: at91: Add platform data for GPIO on at91sam9260-based boards   Simon Glass
• [U-Boot] [PATCH 5/7] dm: at91: Refactor serial driver slightly for driver model   Simon Glass
• [U-Boot] [PATCH 6/7] dm: at91: Add driver model support for the serial driver   Simon Glass
• [U-Boot] [PATCH 7/7] dm: at91: Convert snapper9260 to use driver model   Simon Glass
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PATCH] common/board_r: Fix booting issue on T4240QDS   York Sun
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Eric Nelson
• [U-Boot] [PATCH 2/7] x86: set CONFIG_USE_PRIVATE_LIBGCC to y   Simon Glass
• [U-Boot] [PATCH 3/7] kbuild: drop CONFIG_USE_PRIVATE_LIBGCC=<path/to/libgcc> syntax   Simon Glass
• [U-Boot] [PATCH 4/7] kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig   Simon Glass
• [U-Boot] [PATCH 1/2] powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()   York Sun
• [U-Boot] [PATCH 0/3] usb: gadget: fastboot miscellaneous patches   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141006   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.10-rc3 released   Tom Rini
• [U-Boot] [RFC PATCH 1/7] Allow checking in multiple partitions for scan_dev_for_boot.   Stephen Warren
• [U-Boot] [RFC PATCH 6/7] Add support for loading environment from uEnv.txt in config_distro_bootcmd.   Stephen Warren
• [U-Boot] [PATCH] linker_lists: include <linux/compiler.h>   Masahiro Yamada
• [U-Boot] [PATCH] dm: include <linker_lists.h> from platdata.h and uclass.h   Masahiro Yamada
• [U-Boot] [PATCH] dm: fix include guard   Masahiro Yamada
• [U-Boot] [PATCH] dm: add of_match_ptr() macro   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/7] Allow checking in multiple partitions for scan_dev_for_boot.   Vagrant Cascadian
• [U-Boot] [RFC PATCH 6/7] Add support for loading environment from uEnv.txt in config_distro_bootcmd.   Vagrant Cascadian
• [U-Boot] Debugging u-boot   Kantanu Kumar Mohapatra
• [U-Boot] [PATCH 0/9] ARM: sunxi: Add Allwinner A23 (sun8i) support   Chen-Yu Tsai
• [U-Boot] [PATCH 1/9] ARM: sunxi: Fix build break when CONFIG_MMC is not defined   Chen-Yu Tsai
• [U-Boot] [PATCH 2/9] ARM: sunxi: Add sun8i (A23) UART0 pin mux support   Chen-Yu Tsai
• [U-Boot] [PATCH 3/9] ARM: sunxi: Add support for uart0 on port F (mmc0)   Chen-Yu Tsai
• [U-Boot] [PATCH 4/9] mmc: sunxi: Add support for sun8i (A23)   Chen-Yu Tsai
• [U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support   Chen-Yu Tsai
• [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Chen-Yu Tsai
• [U-Boot] [PATCH 7/9] ARM: sunxi: Allow specifying module in prcm apb0 init function   Chen-Yu Tsai
• [U-Boot] [PATCH 8/9] ARM: sunxi: Add support for using R_UART as console   Chen-Yu Tsai
• [U-Boot] [PATCH 9/9] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig   Chen-Yu Tsai
• [U-Boot] Uboot send pull request   uboot at andestech.com
• [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   DrEagle
• [U-Boot] [PATCH 0/5] ARM: sheevaplug: refresh for 201410   Prafulla Wadaskar
• [U-Boot] am335x: using GPIO1 pins as input   Yegor Yefremov
• [U-Boot] Sorry for the mistake of sending Uboot send pull request   uboot at andestech.com
• [U-Boot] [PATCH] ot1200: remove superfluous "string" tag   Christian Gmeiner
• [U-Boot] [PATCH] ot1200: remove superfluous "string" tag   Masahiro Yamada
• [U-Boot] [PATCH 2/3] fdt: add fdt_add_display_timings(..) and friends   Christian Gmeiner
• [U-Boot] [PATCH 1/2] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH 2/2] usb: eth: smsc95xx: Add EEPROM access support   Alban Bedel
• [U-Boot] U-Boot Mini Summit   Detlev Zundel
• [U-Boot] U-Boot Mini Summit   Detlev Zundel
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH] checkpatch: Add a check for forbidden tags in the git log   Alban Bedel
• [U-Boot] [PATCH][v2] ls102x: configs - Add hash command in freescale LS1 platforms   Ruchika Gupta
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] Pull request: u-boot-uniphier/master   Albert ARIBAUD
• [U-Boot] [PATCH][v2] ls102x: configs - Add hash command in freescale LS1 platforms   Ruchika Gupta
• [U-Boot] [PATCH 1/3][v4] crypto/fsl: Add command for encapsulating/decapsulating blobs   Ruchika Gupta
• [U-Boot] [PATCH 2/3] mpc85xx: configs - Enable blob command in freescale platforms   Ruchika Gupta
• [U-Boot] [PATCH 3/3] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
• [U-Boot] [PATCH 2/3][v4] mpc85xx: configs - Enable blob command in freescale platforms   Ruchika Gupta
• [U-Boot] [PATCH 3/3][v4] ls102x: Add support for secure boot and enable blob command   Ruchika Gupta
• [U-Boot] [PATCH RESEND] vf610twr: Tune DDR initialization settings   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Minkyu Kang
• [U-Boot] [PATCH 2/2] usb: eth: smsc95xx: Add EEPROM access support   Pavel Machek
• [U-Boot] [PATCH] powerpc/BSC9131RDB: Enable creation of dynamic partitions for NAND   Ashish Kumar
• [U-Boot] [SoCFPGA] next steps   Marek Vasut
• [U-Boot] Upstream uboot and Arndale 5250 support   Paolo Pisati
• [U-Boot] [PATCH] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Ian Campbell
• [U-Boot] [PATCH] arndale: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Ian Campbell
• [U-Boot] [PATCH 2/2] usb: eth: smsc95xx: Add EEPROM access support   Alban Bedel
• [U-Boot] [PATCH] HACK: arndale: deinit scsi before launching Linux   Ian Campbell
• [U-Boot] [PATCH] sunxi: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Ian Campbell
• [U-Boot] [PATCH] arndale: Increase command line buffer size (CONFIG_SYS_CBSIZE)   Ian Campbell
• [U-Boot] [PATCH 2/2] usb: eth: smsc95xx: Add EEPROM access support   Marek Vasut
• [U-Boot] [PATCH] HACK: arndale: deinit scsi before launching Linux   Ian Campbell
• [U-Boot] [PATCH RFC 0/2] u-boot: arndale: Support for SATA controller.   Ian Campbell
• [U-Boot] [PATCH 1/2] exynos5250/arndale: Enable SATA/AHCI support.   Ian Campbell
• [U-Boot] [PATCH 2/2] HACK: arndale: deinit scsi before launching Linux   Ian Campbell
• [U-Boot] [PATCH] HACK: arndale: deinit scsi before launching Linux   Albert ARIBAUD
• [U-Boot] Upstream uboot and Arndale 5250 support   Guillaume Gardet
• [U-Boot] [PATCH 29/32] nitrogen6x: config: configure usb_ether   Stefano Babic
• [U-Boot] Upstream uboot and Arndale 5250 support   Paolo Pisati
• [U-Boot] [PATCH 29/32] nitrogen6x: config: configure usb_ether   Eric Nelson
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH 2/2] usb: eth: smsc95xx: Add EEPROM access support   Pavel Machek
• [U-Boot] U-Boot Mini Summit   Alexey Brodkin
• [U-Boot] [PATCH] cli: hush: Adjust 'run' command to run each line of the env var   Simon Glass
• [U-Boot] [PATCH] tools: compiler.h: Fix build on FreeBSD   Jeroen Hofstee
• [U-Boot] [ANN] U-Boot v2014.10-rc3 released   Jeroen Hofstee
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Minkyu Kang
• [U-Boot] [PATCH v2 0/4] x86: Enable FIT images on x86   Simon Glass
• [U-Boot] [PATCH v2 1/4] x86: Enable LMB and RAMDISK_HIGH by default   Simon Glass
• [U-Boot] [PATCH v2 2/4] x86: Rewrite bootm.c to make it similar to ARM   Simon Glass
• [U-Boot] [PATCH v2 3/4] x86: Allow cmdline setup in setup_zimage() to be optional   Simon Glass
• [U-Boot] [PATCH v2 4/4] x86: Support loading kernel setup from a FIT   Simon Glass
• [U-Boot] [PATCH v2 0/4] ls102xa: HYP/non-sec: for ls102xa.   Xiubo Li
• [U-Boot] [PATCH v2 1/4] ARM: HYP/non-sec: add the pen address byte reverting support.   Xiubo Li
• [U-Boot] [PATCH v2 2/4] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   Xiubo Li
• [U-Boot] [PATCH v2 3/4] ls102xa: HYP/non-sec: support for ls102xa boards   Xiubo Li
• [U-Boot] [PATCH v2 4/4] ARM: ls102xa: allow all the peripheral access permissions as R/W.   Xiubo Li
• [U-Boot] [PATCH] mxs: add watchdog   Alexey Ignatov
• [U-Boot] [PATCH] ARM: LS1021A: Configure device stream id for smmu.   Xiubo Li
• [U-Boot] [PATCH v6 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH v6 01/15] Exynos: Use 900MHz ARM frequency in SPL for peach_pit   Simon Glass
• [U-Boot] [PATCH v6 02/15] exynos5: Enable data cache   Simon Glass
• [U-Boot] [PATCH v6 03/15] cros_ec: power: Add a tunnelled version of the tps65090 driver   Simon Glass
• [U-Boot] [PATCH v6 04/15] cros_ec: exynos: Use the correct tps65090 driver in each case   Simon Glass
• [U-Boot] [PATCH v6 05/15] dm: exynos: Split out the cros_ec drivers   Simon Glass
• [U-Boot] [PATCH v6 06/15] exynos: dts: Add device tree node for cros_ec keyboard   Simon Glass
• [U-Boot] [PATCH v6 07/15] exynos: Rename -dt config files to -common   Simon Glass
• [U-Boot] [PATCH v6 08/15] exynos: Move common exynos settings into a common file   Simon Glass
• [U-Boot] [PATCH v6 09/15] exynos: Move common smdk5420 things to common file   Simon Glass
• [U-Boot] [PATCH v6 10/15] exynos: config: Move cros_ec and tps65090 out of smdk boards   Simon Glass
• [U-Boot] [PATCH v6 11/15] config: Move arndale to use common exynos5250 file   Simon Glass
• [U-Boot] [PATCH v6 12/15] config: Move smdkv310 to use common exynos4 file   Simon Glass
• [U-Boot] [PATCH v6 13/15] samsung: Enable device tree for s5p_goni   Simon Glass
• [U-Boot] [PATCH v6 14/15] samsung: Enable device tree for smdkc100   Simon Glass
• [U-Boot] [PATCH v6 15/15] exynos: Enable pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH v5 0/15] samsung: Use common config files with Samsung boards   Simon Glass
• [U-Boot] [PATCH] linker_lists: include <linux/compiler.h>   Simon Glass
• [U-Boot] [PATCH] dm: fix include guard   Simon Glass
• [U-Boot] [PATCH] dm: include <linker_lists.h> from platdata.h and uclass.h   Simon Glass
• [U-Boot] [PATCH] dm: add of_match_ptr() macro   Simon Glass
• [U-Boot] [PATCH v3 0/3] spi, sf: add mtdparts feature to spi and sf commands   Heiko Schocher
• [U-Boot] [PATCH v3 0/2] Introduce CONFIG_SUPPORT_SPL/TPL   Masahiro Yamada
• [U-Boot] [PATCH v3 1/2] kconfig: add CONFIG_SUPPORT_SPL   Masahiro Yamada
• [U-Boot] [PATCH v3 2/2] kconfig: add CONFIG_SUPPORT_TPL   Masahiro Yamada
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH 1/4] Add snoop disable for slave port 0, port 1 and port 2   Huan Wang
• [U-Boot] [ANN] U-Boot v2014.10-rc3 released   Wolfgang Denk
• [U-Boot] Upstream uboot and Arndale 5250 support   Guillaume Gardet
• [U-Boot] [PATCH][v2] ls102x: configs - Add hash command in freescale LS1 platforms   Wolfgang Denk
• [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH 1/6] Exynos5800: Introduce new proid for Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH 1/2] WIP: Add support for pi   Akshay Saraswat
• [U-Boot] [PATCH 2/6] Exynos5800: Add DTS for new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH 2/2] WIP2: Add support for pi   Akshay Saraswat
• [U-Boot] [PATCH 3/6] Config: Exynos5800: Enable build for Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH 4/6] DMC: Exynos5: Enable update mode for DREX controller   Akshay Saraswat
• [U-Boot] [PATCH 5/6] Config: Exynos5420: Refactor SDRAM Bank and Size   Akshay Saraswat
• [U-Boot] [PATCH 6/6] Exynos5: ddr3: Choose between single or double channel config   Akshay Saraswat
• [U-Boot] EXT4 slow boot problem   Pendleton, Blair
• [U-Boot] [PATCH 1/2] mtd: denali: fix NAND_CMD_PARAM command   Chin Liang See
• [U-Boot] [PATCH 2/2] mtd: denali: support NAND_CMD_RNDOUT command   Chin Liang See
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 2/2] HACK: arndale: deinit scsi before launching Linux   Wolfgang Denk
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Chin Liang See
• [U-Boot] [SoCFPGA] next steps   Michal Simek
• [U-Boot] [PATCH 1/2] WIP: Add support for pi   Akshay Saraswat
• [U-Boot] [PATCH 2/2] WIP2: Add support for pi   Akshay Saraswat
• [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
• [U-Boot] Upstream uboot and Arndale 5250 support   Paolo Pisati
• [U-Boot] [PATCH 7/7] mips: enable CONFIG_USE_PRIVATE_LIBGCC by default   Daniel Schwierzeck
• [U-Boot] [SoCFPGA] next steps   Marek Vasut
• [U-Boot] [PATCH v6 0/15] samsung: Use common config files with Samsung boards   Minkyu Kang
• [U-Boot] [PATCH] armv7: s5pc1xx: improve cache handling   Minkyu Kang
• [U-Boot] [PATCH v2] exynos: update maintainer of Snow and SMDK5420 board   Minkyu Kang
• [U-Boot] [PATCH] odroid: clock: set aclk_cores to 200MHz   Minkyu Kang
• [U-Boot] [PATCH] ORIGEN: Enhance origen config to be more flexible on boot.   Minkyu Kang
• [U-Boot] [SoCFPGA] next steps   Pavel Machek
• [U-Boot] [PATCH v8 08/12] dm: exynos: Move s5p_goni to generic board   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Nikita Kiryanov
• [U-Boot] [PATCH v8 08/12] dm: exynos: Move s5p_goni to generic board   Robert Baldyga
• [U-Boot] [PATCH V2] ORIGEN: Enhance origen config to be more flexible on boot.   Guillaume GARDET
• [U-Boot] [FAT/EXT4/SANDBOX] files > 2GB   Suriyan Ramasami
• [U-Boot] Upstream uboot and Arndale 5250 support   Guillaume Gardet
• [U-Boot] [SoCFPGA] next steps   Dinh Nguyen
• [U-Boot] U-Boot Mini Summit   Detlev Zundel
• [U-Boot] [PATCH] fix typo in error message   Pavel Machek
• [U-Boot] [PATCH] fix typo in error message   Jeroen Hofstee
• [U-Boot] [PATCH][v3] ls102x: configs - Add hash command in freescale LS1 platforms   Ruchika Gupta
• [U-Boot] [U-boot] [Patch v2 0/4] keystone2: generalize navigator driver usage   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 0/4] keystone2: generalize navigator driver usage   Tom Rini
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   picmaster at mail.bg
• [U-Boot] [SoCFPGA] next steps   Marek Vasut
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [SoCFPGA] next steps   Tom Rini
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Suriyan Ramasami
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Pavel Machek
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Simon Glass
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Przemyslaw Marczak
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Przemyslaw Marczak
• [U-Boot] [PATCH 02/19] exynos: config-common: enable errno_str() function   Przemyslaw Marczak
• [U-Boot] [PATCH 03/19] exynos: config-common: enable generic fs command   Przemyslaw Marczak
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Przemyslaw Marczak
• [U-Boot] [PATCH 05/19] dm: pmic: add implementation of driver model regulator uclass   Przemyslaw Marczak
• [U-Boot] [PATCH 06/19] dm: common: board_r: add call and weak of power_init_dm()   Przemyslaw Marczak
• [U-Boot] [PATCH 07/19] dm: pmic: add max77686 pmic driver   Przemyslaw Marczak
• [U-Boot] [PATCH 08/19] dm: regulator: add max77686 regulator driver   Przemyslaw Marczak
• [U-Boot] [PATCH 09/19] dm: pmic: new commands: pmic and regulator   Przemyslaw Marczak
• [U-Boot] [PATCH 10/19] dm: board:samsung: power_init_board: add requirement of CONFIG_DM_PMIC   Przemyslaw Marczak
• [U-Boot] [PATCH 11/19] doc: driver-model: pmic and regulator uclass documentation   Przemyslaw Marczak
• [U-Boot] [PATCH 12/19] samsung: board: lcd menu: check if any power framework is enabled   Przemyslaw Marczak
• [U-Boot] [PATCH 13/19] samsung: misc: power_key_pressed: add support to dm pmic framework   Przemyslaw Marczak
• [U-Boot] [PATCH 14/19] trats2: board: add support to dm pmic api   Przemyslaw Marczak
• [U-Boot] [PATCH 15/19] trats2: dts: max77686: add pmic alias and names cleanup   Przemyslaw Marczak
• [U-Boot] [PATCH 16/19] trats2: config: enable dm pmic, dm regulator api, dm max77686   Przemyslaw Marczak
• [U-Boot] [PATCH 17/19] odroid: board: add support to dm pmic api   Przemyslaw Marczak
• [U-Boot] [PATCH 18/19] odroid: dts: add 'voltage-regulators' description to max77686 node   Przemyslaw Marczak
• [U-Boot] [PATCH 19/19] odroid: config: enable dm pmic, dm regulator and max77686 driver   Przemyslaw Marczak
• [U-Boot] [PATCH] ARM: mxs: tools: Add support for verbose and silent boot progress flags   Alexey Ignatov
• [U-Boot] [PULL] Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Przemyslaw Marczak
• [U-Boot] [PATCH 00/49] reduce warnings with W=1   Jeroen Hofstee
• [U-Boot] [PATCH 01/49] arm: board: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 02/49] common: board: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 03/49] cti_flash.c: use __weak when requested   Jeroen Hofstee
• [U-Boot] [PATCH 04/49] i2c: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 05/49] misc: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 06/49] net: phy: fix warnings with W=1   Jeroen Hofstee
• [U-Boot] [PATCH 07/49] pci: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 08/49] samsung: board: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 09/49] usb: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 10/49] video: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH 11/49] common: cmd_elf: make do_bootelf_exec static   Jeroen Hofstee
• [U-Boot] [PATCH 12/49] common: board_r: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 13/49] disk/part.c: make local function static   Jeroen Hofstee
• [U-Boot] [PATCH 14/49] ehci-hcd.c: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 15/49] env_nand: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 16/49] eth: make eth_address_set static   Jeroen Hofstee
• [U-Boot] [PATCH 17/49] gpio: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 18/49] image-fit: make local function static   Jeroen Hofstee
• [U-Boot] [PATCH 19/49] lmb: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 20/49] net: fec_mxc: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 21/49] omap3: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 22/49] omap_gpmc: fix warnigs with W=1   Jeroen Hofstee
• [U-Boot] [PATCH 23/49] sdhci: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 24/49] serial: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 25/49] spi: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 26/49] tegra: make local functions static   Jeroen Hofstee
• [U-Boot] [PATCH 27/49] video: ipu: prevent warnings with W=1   Jeroen Hofstee
• [U-Boot] [PATCH 28/49] common:console: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 29/49] string.h: add missing prototypes   Jeroen Hofstee
• [U-Boot] [PATCH 30/49] arch-mx: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 31/49] common/cmd_elf.c: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 32/49] imx: add missing includes   Jeroen Hofstee
• [U-Boot] [PATCH 33/49] leds: missing include   Jeroen Hofstee
• [U-Boot] [PATCH 34/49] lib: bootm: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 35/49] mmc: bcm2835_sdhci: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 36/49] net: davince: add missing include   Jeroen Hofstee
• [U-Boot] [PATCH 37/49] omap3: board: add missing include and proto   Jeroen Hofstee
• [U-Boot] [PATCH 38/49] twister: add missing includes   Jeroen Hofstee
• [U-Boot] [PATCH 39/49] arm: vectors: provide protypes from vectors.S   Jeroen Hofstee
• [U-Boot] [PATCH 40/49] bootm: add prototype for arch_preboot_os   Jeroen Hofstee
• [U-Boot] [PATCH 41/49] elf: add prototype for valid_elf_image   Jeroen Hofstee
• [U-Boot] [PATCH 42/49] fdt_support: add prototypes for __weak functions   Jeroen Hofstee
• [U-Boot] [PATCH 43/49] gpio: add protype for name_to_gpio   Jeroen Hofstee
• [U-Boot] [PATCH 44/49] ide: add missing prototype   Jeroen Hofstee
• [U-Boot] [PATCH 45/49] mmc: add prototype for mmc_get_env_addr   Jeroen Hofstee
• [U-Boot] [PATCH 46/49] serial: add prototypes for init functions   Jeroen Hofstee
• [U-Boot] [PATCH 47/49] spl: add prototype for jump_to_image_no_args   Jeroen Hofstee
• [U-Boot] [PATCH 48/49] tegra: add proto for pin_mux_mmc   Jeroen Hofstee
• [U-Boot] [PATCH 49/49] i2c: designware: add an implement i2c protos   Jeroen Hofstee
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Suriyan Ramasami
• [U-Boot] [PATCH] am335x_boneblack: Only modify NAND/NOR/MMC1 pinmux on BBB in boneblack builds.   Tom Rini
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Pavel Machek
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Suriyan Ramasami
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH] print true board names on socfpga   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Add support for verbose and silent boot progress flags   Marek Vasut
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH] print true board names on socfpga   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Add support for verbose and silent boot progress flags   Alexey Ignatov
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH] ARM: mxs: tools: Add support for verbose and silent boot progress flags   Marek Vasut
• [U-Boot] [PATCH] wireless_space: set myself as maintainer   Albert ARIBAUD
• [U-Boot] [PATCH] print true board names on socfpga   Albert ARIBAUD
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH] print true board names on socfpga   Albert ARIBAUD
• [U-Boot] [PATCH] print true board names on socfpga   Marek Vasut
• [U-Boot] [PATCH] print true board names on socfpga   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH v3] ARM: mxs: tools: Add support for boot progress display flag   Alexey Ignatov
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH v2] ARM: mxs: tools: Add support for boot progress display flag   Marek Vasut
• [U-Boot] [PATCH v3] ARM: mxs: tools: Add support for boot progress display flag   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH] print true board names on socfpga   Pavel Machek
• [U-Boot] [PATCH v3] ARM: mxs: tools: Add support for boot progress display flag   Alexey Ignatov
• [U-Boot] [PATCH v3] ARM: mxs: tools: Add support for boot progress display flag   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] SUNXI NAND CONTROLLER Driver Model (WIP)   Yassin Jaffer
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH V4] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Rommel Custodio
• [U-Boot] [PATCH] net: asix: Add support for AX88772B   Alexandre Courbot
• [U-Boot] [PATCH 04/49] i2c: use __weak   Heiko Schocher
• [U-Boot] [U-Boot, 49/49] i2c: designware: add an implement i2c protos   Heiko Schocher
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH] net: asix: Add support for AX88772B   Simon Glass
• [U-Boot] [PATCH v8 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Simon Glass
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Nobuhiro Iwamatsu
• [U-Boot] [FAT/EXT4/SANDBOX] files > 2GB   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Joakim Tjernlund
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Stefano Babic
• [U-Boot] [PATCH 01/49] arm: board: use __weak   Albert ARIBAUD
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Stefano Babic
• [U-Boot] [PATCH 39/49] arm: vectors: provide protypes from vectors.S   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] HACK: arndale: deinit scsi before launching Linux   Ian Campbell
• [U-Boot] [PATCH v5 1/5] mx6: crm_regs: Add bit definitions for anadig registers   Stefano Babic
• [U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Ian Campbell
• [U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 3/4] arm: ls102xa: Fixed a register definition error   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 4/4] arm: ls1021qds: Add deep sleep support   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Hans de Goede
• [U-Boot] [SoCFPGA] next steps   Michal Simek
• [U-Boot] [PATCH] compulab: eeprom: add default eeprom bus   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] imx:mx6sxsabresd add qspi support   Peng Fan
• [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Peng Fan
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
• [U-Boot] [PATCH v2 2/2] imx:mx6sxsabresd add qspi support   Jagan Teki
• [U-Boot] [PATCH v3 0/3] spi, sf: add mtdparts feature to spi and sf commands   Jagan Teki
• [U-Boot] [SoCFPGA] next steps   Jagan Teki
• [U-Boot] [PATCH v2 1/2] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH v2 2/2] usb: eth: smsc95xx: Add EEPROM access support for LAN9514   Alban Bedel
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] Device tree for Atmel SAMA5D31   Andy Pont
• [U-Boot] [U-boot] [Patch v3 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [SoCFPGA] next steps   Marek Vasut
• [U-Boot] Discussion topics / issues   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] Discussion topics / issues   Michal Simek
• [U-Boot] [PATCH] am335x_evm: Correct "raw" portions of DFU alt into   Tom Rini
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Przemyslaw Marczak
• [U-Boot] [PATCH] net: asix: Add support for AX88772B   Marek Vasut
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] [PATCH v2 1/2] net: Add a command to access the EEPROM from ethernet devices   Marek Vasut
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Simon Glass
• [U-Boot] Discussion topics / issues   Tom Rini
• [U-Boot] Discussion topics / issues   Marek Vasut
• [U-Boot] [SoCFPGA] next steps   Jagan Teki
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] Discussion topics / issues   Marek Vasut
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Tom Rini
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Przemyslaw Marczak
• [U-Boot] Discussion topics / issues   Tom Rini
• [U-Boot] u-boot, fsl_espi.c driver   York Sun
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] Discussion topics / issues   Marek Vasut
• [U-Boot] Discussion topics / issues   Jagan Teki
• [U-Boot] u-boot, fsl_espi.c driver   Jagan Teki
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Tom Rini
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] u-boot, fsl_espi.c driver   York Sun
• [U-Boot] [PATCH 03/49] cti_flash.c: use __weak when requested   Jeroen Hofstee
• [U-Boot] [PATCH 04/49] i2c: use __weak   Jeroen Hofstee
• [U-Boot] [FAT/EXT4/SANDBOX] files > 2GB   Suriyan Ramasami
• [U-Boot] [U-Boot, 49/49] i2c: designware: add an implement i2c protos   Jeroen Hofstee
• [U-Boot] [U-boot] [Patch] configs:ks2_evm: update defconfigs to support SPL   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] ks2_evm: readme: align according to actual sources   Ivan Khoronzhuk
• [U-Boot] [PATCH v2 2/2] usb: eth: smsc95xx: Add EEPROM access support for LAN9514   Pavel Machek
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] Discussion topics / issues   Pavel Machek
• [U-Boot] [PATCH v1 1/1] odroid: Turn blue LED on in u-boot   Suriyan Ramasami
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] [PATCH 2/2] mtd: denali: support NAND_CMD_RNDOUT command   Scott Wood
• [U-Boot] [PATCH v2] arm: pxa: use common timer functions   andrew.ruder at elecsyscorp.com
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Simon Glass
• [U-Boot] Discussion topics / issues   Pavel Machek
• [U-Boot] [PATCH v2] arm: pxa: use common timer functions   Andrew Ruder
• [U-Boot] Parsing of multi-line env vars broken   Simon Glass
• [U-Boot] [PATCH v2] arm: pxa: use common timer functions   Andrew Ruder
• [U-Boot] Discussion topics / issues   Pavel Machek
• [U-Boot] [PATCH V5] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] SUNXI NAND CONTROLLER Driver Model (WIP)   Simon Glass
• [U-Boot] [PATCH V6] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH v2] arm: pxa: use common timer functions   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: add MAINTAINERS entry   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Use EMAC1 on SoCDK   Marek Vasut
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] Discussion topics / issues   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH V6] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] Device tree for Atmel SAMA5D31   Bo Shen
• [U-Boot] [PATCH v2 2/2] imx:mx6sxsabresd add qspi support   Peng Fan
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Fabio Estevam
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Fabio Estevam
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Fabio Estevam
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Simon Glass
• [U-Boot] [PATCH 1/4] dm: fix comments   Simon Glass
• [U-Boot] [PATCH 2/4] dm: do not check the existence of uclass operation   Simon Glass
• [U-Boot] [PATCH 4/4] dm: simplify the loop in lists_driver_lookup_name()   Simon Glass
• [U-Boot] [PATCH] linker_lists: include <linux/compiler.h>   Simon Glass
• [U-Boot] [PATCH] dm: include <linker_lists.h> from platdata.h and uclass.h   Simon Glass
• [U-Boot] [PATCH] dm: fix include guard   Simon Glass
• [U-Boot] [PATCH] dm: add of_match_ptr() macro   Simon Glass
• [U-Boot] [PATCH] patman: Check commit_match before stripping leading whitespace   Simon Glass
• [U-Boot] [PATCH] sandbox: Fix README to indicate that vendor name is unset   Simon Glass
• [U-Boot] [PATCH] patman: Explain how to make doc/git-mailrc work   Simon Glass
• [U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes   Simon Glass
• [U-Boot] [PATCH 05/19] dm: pmic: add implementation of driver model regulator uclass   Simon Glass
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Simon Glass
• [U-Boot] [PATCH 06/19] dm: common: board_r: add call and weak of power_init_dm()   Simon Glass
• [U-Boot] [PATCH 11/19] doc: driver-model: pmic and regulator uclass documentation   Simon Glass
• [U-Boot] [PATCH 13/19] samsung: misc: power_key_pressed: add support to dm pmic framework   Simon Glass
• [U-Boot] [PATCH 14/19] trats2: board: add support to dm pmic api   Simon Glass
• [U-Boot] [PATCH 16/19] trats2: config: enable dm pmic, dm regulator api, dm max77686   Simon Glass
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH] arm: goni: add i2c_init_board()   Simon Glass
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Joakim Tjernlund
• [U-Boot] [PATCH] imx: mx6 sabreauto: Add board support for USB EHCI   Ye.Li
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/2] arm:mx6sx add QSPI support   Albert ARIBAUD
• [U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister   Marek Vasut
• [U-Boot] Discussion topics / issues   Albert ARIBAUD
• [U-Boot] [PATCH 0/3] Serial Flash: call spi_flash_free more coherently   Valentin Longchamp
• [U-Boot] [PATCH] imx: mx6 sabreauto: Add board support for USB EHCI   Fabio Estevam
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Przemyslaw Marczak
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] [PATCH 0/10] dm: x86: Minor fixes and configuration tidy-up for link   Simon Glass
• [U-Boot] [PATCH 01/10] x86: config: Enable dhcp on link   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Add device tree information for Chrome OS EC   Simon Glass
• [U-Boot] [PATCH 03/10] x86: dts: Add device tree compatible string for Intel IPC   Simon Glass
• [U-Boot] [PATCH 04/10] x86: cros_ec: Update LPC driver for new cros_ec header   Simon Glass
• [U-Boot] [PATCH 05/10] x86: cros_ec: Enable cros_ec for link   Simon Glass
• [U-Boot] [PATCH 06/10] doc: Remove note about auto-complete not working with hush   Simon Glass
• [U-Boot] [PATCH 07/10] x86: link: Tidy up the command lines options   Simon Glass
• [U-Boot] [PATCH 08/10] x86: config: link: Display the board model on the screen   Simon Glass
• [U-Boot] [PATCH 09/10] x86: Enable FIT, ELF on coreboot   Simon Glass
• [U-Boot] [PATCH 10/10] net: Display the size when tftpboot finishes   Simon Glass
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Przemyslaw Marczak
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH 05/19] dm: pmic: add implementation of driver model regulator uclass   Przemyslaw Marczak
• [U-Boot] [PATCH 11/19] doc: driver-model: pmic and regulator uclass documentation   Przemyslaw Marczak
• [U-Boot] [PATCH 14/19] trats2: board: add support to dm pmic api   Przemyslaw Marczak
• [U-Boot] [PATCH 0/8] x86: Convert serial and GPIO to driver model   Simon Glass
• [U-Boot] [PATCH 1/8] dm: serial: ns16550: Add a cast to the I/O operations   Simon Glass
• [U-Boot] [PATCH 2/8] dm: x86: Remove ebp assembler warning in zimage.c   Simon Glass
• [U-Boot] [PATCH 3/8] dm: x86: Zero global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH 4/8] dm: x86: Support pre-reloc malloc()   Simon Glass
• [U-Boot] [PATCH 5/8] dm: x86: Add a gpio header for coreboot   Simon Glass
• [U-Boot] [PATCH 6/8] dm: x86: Convert Intel ICH6 GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH 7/8] dm: x86: dts: Add additional info to the serial port node   Simon Glass
• [U-Boot] [PATCH 8/8] dm: x86: Convert coreboot serial to use driver model   Simon Glass
• [U-Boot] [PATCH 16/19] trats2: config: enable dm pmic, dm regulator api, dm max77686   Przemyslaw Marczak
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] Discussion topics / issues   Jeroen Hofstee
• [U-Boot] [PATCH 0/10] x86: Add support for booting 64-bit uncompressed kernel images   Simon Glass
• [U-Boot] [PATCH 01/10] x86: Move paging functions into cpu.c   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Bring in msr-index.h from linux 3.8   Simon Glass
• [U-Boot] [PATCH 03/10] x86: Display basic CPU information on boot   Simon Glass
• [U-Boot] [PATCH 04/10] x86: Add support for starting 64-bit kernel   Simon Glass
• [U-Boot] [PATCH 05/10] x86: Move kernel boot function to arch/x86/lib/bootm.c   Simon Glass
• [U-Boot] [PATCH 06/10] x86: image: Add new image type for x64_64   Simon Glass
• [U-Boot] [PATCH 07/10] x86: bootm: Support booting a 64-bit raw kernel   Simon Glass
• [U-Boot] [PATCH 08/10] x86: Correct a few progress message nits   Simon Glass
• [U-Boot] [PATCH 09/10] bootm: Move compression progress/error messages into a function   Simon Glass
• [U-Boot] [PATCH 10/10] x86: config: Increase CONFIG_SYS_BOOTM_LEN to 16MB   Simon Glass
• [U-Boot] Discussion topics / issues   Marek Vasut
• [U-Boot] Discussion topics / issues   Fabio Estevam
• [U-Boot] Pull request: nand flash   Tom Rini
• [U-Boot] [U-Boot, fix, for, v2014.10] sunxi: Fix gmac not working reliable on the Bananapi   Tom Rini
• [U-Boot] [U-Boot, for-v2014.10?] pxe: Ensure we don't overflow bootargs   Tom Rini
• [U-Boot] common/board_r: Fix booting issue on T4240QDS   Tom Rini
• [U-Boot] [U-Boot,1/5] omap3: overo: Fix fdtfile test   Tom Rini
• [U-Boot] [U-Boot, 1/4] ahci: Don't start command DMA engine before buffers are set   Tom Rini
• [U-Boot] [U-Boot,2/4] OMAP5+: sata/scsi: Implement scsi_init()   Tom Rini
• [U-Boot] [U-Boot, 3/4] ARM: OMAP5+: sata: Move scsi_scan() to the right place   Tom Rini
• [U-Boot] [U-Boot, 4/4] common: spl_sata: perform SCSI scan before getting device   Tom Rini
• [U-Boot] [U-Boot, U-boot] ARM: keystone: clock: fix main pll ratio div definitions   Tom Rini
• [U-Boot] kconfig: fix another bug of "make savedefconfig"   Tom Rini
• [U-Boot] [U-Boot, 1/5] powerpc: ppc4xx: remove board support for KAREF and METROBOX   Tom Rini
• [U-Boot] [U-Boot, 2/5] powerpc: ppc4xx: remove board support for CRAYL1   Tom Rini
• [U-Boot] [U-Boot, 3/5] powerpc: ppc4xx: remove board support for bluestone   Tom Rini
• [U-Boot] [U-boot] [Patch v3 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-Boot, for-v2014.10?] pxe: Ensure we don't overflow bootargs   Ian Campbell
• [U-Boot] [U-boot] [Patch v3 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 4/6] ARM: keystone2: spl: add K2L SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [U-Boot, 4/5] powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7   Tom Rini
• [U-Boot] [U-Boot, 5/5] powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR   Tom Rini
• [U-Boot] beagleboard: Remove side effects of i2c2 pullup resisters initialization code   Tom Rini
• [U-Boot] SPDX License cleanup for LiMon imported files   Tom Rini
• [U-Boot] [U-Boot,1/4] PIP405: convert to generic board   Tom Rini
• [U-Boot] [U-Boot,2/4] MIP405: convert to generic board   Tom Rini
• [U-Boot] [U-Boot,3/4] VCMA9: convert to generic board   Tom Rini
• [U-Boot] [U-Boot,4/4] PATI: convert to generic board   Tom Rini
• [U-Boot] PATI: fix broken SPI access   Tom Rini
• [U-Boot] VCMA9: remove EXT2 support   Tom Rini
• [U-Boot] multiconfig.sh: replace GNU sed specific match   Tom Rini
• [U-Boot] scripts/multiconfig.sh: Fix a typo   Tom Rini
• [U-Boot] board/BuR: fix pinmux for MII Ethernet Interface   Tom Rini
• [U-Boot] common/board_r: remove warning in initr_mem for 64-bit phys_size_t   Tom Rini
• [U-Boot] am335x_evm: Correct BOOTCOUNT driver support   Tom Rini
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: colibri_t30: asix usb ethernet reset regression   Marcel Ziswiler
• [U-Boot] [U-boot] [Patch 0/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/4] dma: ti-edma3: introduce edma3 driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/4] ARM: keystone: msmc: extend functionality of SES   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/4] ARM: keystone: cmd_ddr3: add ddr3 commands to test ddr   Ivan Khoronzhuk
• [U-Boot] [PATCH] tegra: colibri_t30: asix usb ethernet reset regression   Simon Glass
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Simon Glass
• [U-Boot] [PATCH] gpio: header file comment spelling fixes   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Simon Glass
• [U-Boot] [PATCH] gpio: header file comment spelling fixes   Simon Glass
• [U-Boot] [PATCH] tegra: clean-up useless define   Marcel Ziswiler
• [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH] tegra: clean-up useless define   Simon Glass
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: clean-up useless define   Marcel Ziswiler
• [U-Boot] Discussion topics / issues   Jeroen Hofstee
• [U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support   Tom Rini
• [U-Boot] [PATCH 0/5] omap3: overo: Add foreign expansion board support   Ash Charles
• [U-Boot] [PATCH] PATI: fix broken SPI access   Tom Rini
• [U-Boot] [PATCH] PATI: fix broken SPI access   Jagan Teki
• [U-Boot] [PATCH fix for v2014.10] serial-uclass: Fix compilation error   Hans de Goede
• [U-Boot] [PATCH fix for v2014.10] serial-uclass: Fix compilation error   Tom Rini
• [U-Boot] [U-Boot, U-boot] configs:ks2_evm: update defconfigs to support SPL   Tom Rini
• [U-Boot] [U-Boot, U-boot] ks2_evm: readme: align according to actual sources   Tom Rini
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] Discussion topics / issues   Albert ARIBAUD
• [U-Boot] [U-Boot,1/2] macb: simplify gmac initialisation   Andreas Bießmann
• [U-Boot] [U-Boot,2/2] sama5d3xek: run PHY's config   Andreas Bießmann
• [U-Boot] ARM: atmel: switch at91sam9263ek to generic board   Andreas Bießmann
• [U-Boot] arm, at91: add generic board support for the taurus and corvus board   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] Discussion topics / issues   Jeroen Hofstee
• [U-Boot] Discussion topics / issues   Albert ARIBAUD
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Maxime Hadjinlian
• [U-Boot] [PATCH v2] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: colibri_t30: clean-up spurious new line   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: dts: colibri_t30 add serial port details   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Simon Glass
• [U-Boot] [PATCH] doc: Fix comparison operator   Marek Vasut
• [U-Boot] [PATCH] tegra: apalis_t30: master revamp   Marcel Ziswiler
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Marcel Ziswiler
• [U-Boot] [PATCH 2/2] arm: socfpga: Use EMAC1 on SoCDK   Marek Vasut
• [U-Boot] [PATCH] tegra: gpio: fix null label regression   Simon Glass
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141010   Marek Vasut
• [U-Boot] [PATCH] tegra: colibri_t30: clean-up spurious new line   Simon Glass
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Simon Glass
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141010   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V6] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH V6] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH V2] sf: Add support for flag status register on Micron chips   Hou Zhiqiang
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141010   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] kconfig: add CONFIG_SUPPORT_TPL   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] ARM: prevent compiler warnings from bootm.c   Albert ARIBAUD
• [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Albert ARIBAUD
• [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
• [U-Boot] [PATCH] tools: compiler.h: Fix build on FreeBSD   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] Discussion topics / issues   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: sunxi: Move watchdog register definitions to separate file   Ian Campbell
• [U-Boot] [PATCH 2/3] ARM: sunxi: Add sun6i/sun8i timer block register definition   Ian Campbell
• [U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i   Ian Campbell
• [U-Boot] [PATCH v2 1/5] sunxi: Add mmc card-detect functionality   Ian Campbell
• [U-Boot] [PATCH v2 2/5] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Ian Campbell
• [U-Boot] [PATCH v2 3/5] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Ian Campbell
• [U-Boot] [PATCH v2 4/5] sunxi: Use PG3 - PG8 as io-pins for mmc1   Ian Campbell
• [U-Boot] [PATCH v2 5/5] sunxi: Enable second sdcard slot found on some boards   Ian Campbell
• [U-Boot] [PATCH 1/9] ARM: sunxi: Fix build break when CONFIG_MMC is not defined   Ian Campbell
• [U-Boot] [PATCH 2/9] ARM: sunxi: Add sun8i (A23) UART0 pin mux support   Ian Campbell
• [U-Boot] [PATCH 3/9] ARM: sunxi: Add support for uart0 on port F (mmc0)   Ian Campbell
• [U-Boot] [PATCH 4/9] mmc: sunxi: Add support for sun8i (A23)   Ian Campbell
• [U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support   Ian Campbell
• [U-Boot] [PATCH 4/8] ARMv8: PSCI: Add linker section to hold PSCI code   Marc Zyngier
• [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Ian Campbell
• [U-Boot] [PATCH 7/9] ARM: sunxi: Allow specifying module in prcm apb0 init function   Ian Campbell
• [U-Boot] [PATCH 7/9] ARM: sunxi: Allow specifying module in prcm apb0 init function   Ian Campbell
• [U-Boot] [PATCH 8/9] ARM: sunxi: Add support for using R_UART as console   Ian Campbell
• [U-Boot] [PATCH 9/9] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig   Ian Campbell
• [U-Boot] [PATCH] cmd_sf: add handler for +len arg for all commands   Marek Vasut
• [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support   Marek Vasut
• [U-Boot] [PATCH 02/10] arm: s3c24xx: Fix incorrect CONFIG_SYS_S3C2410_NAND_HWECC name   Marek Vasut
• [U-Boot] [PATCH 03/10] mtd: nand: s3c: Fix data type width in debug()   Marek Vasut
• [U-Boot] [PATCH 04/10] mtd: nand: s3c: Unify the register definition and naming   Marek Vasut
• [U-Boot] [PATCH 05/10] mtd: nand: s3c: Add S3C2440 specifics   Marek Vasut
• [U-Boot] [PATCH 06/10] mtd: nand: s3c: Add S3C2440 buffer reading   Marek Vasut
• [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions   Marek Vasut
• [U-Boot] [PATCH 08/10] i2c: s3c: Implant support for S3C2440   Marek Vasut
• [U-Boot] [PATCH 09/10] gpio: s3c: Fix the GPIO driver   Marek Vasut
• [U-Boot] [PATCH 10/10] net: smc911x: Keep MAC programmed   Marek Vasut
• [U-Boot] [PATCH 2/2] kconfig: add CONFIG_SUPPORT_TPL   Masahiro YAMADA
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] [SoCFPGA] next steps   Masahiro YAMADA
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Jagan Teki
• [U-Boot] [PATCH v3 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PULL] u-boot-socfpga/topic/arm/socfpga-20141010   Marek Vasut
• [U-Boot] [PATCH 2/2] kconfig: add CONFIG_SUPPORT_TPL   Albert ARIBAUD
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH v4] ARM: mxs: tools: Add support for boot progress display flag   Alexey Ignatov
• [U-Boot] [PATCH] arm: mxs: Define bootscript env variable on m28evk   Marek Vasut
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v4] ARM: mxs: tools: Add support for boot progress display flag   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i   Chen-Yu Tsai
• [U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support   Chen-Yu Tsai
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH 9/9] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH 7/9] ARM: sunxi: Allow specifying module in prcm apb0 init function   Chen-Yu Tsai
• [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Chen-Yu Tsai
• [U-Boot] [PATCH v2 1/5] sunxi: Add mmc card-detect functionality   Hans de Goede
• [U-Boot] [PATCH v2 2/5] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Hans de Goede
• [U-Boot] New discussion proposal for u-boot summit: "switch malloc to succeed or die model, as glib does"   Hans de Goede
• [U-Boot] New discussion proposal for u-boot summit: "switch malloc to succeed or die model, as glib does"   Hans de Goede
• [U-Boot] [PATCH 1/9] ARM: sunxi: Fix build break when CONFIG_MMC is not defined   Hans de Goede
• [U-Boot] [PATCH v2 3/5] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support   Ian Campbell
• [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Ian Campbell
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Hans de Goede
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Hans de Goede
• [U-Boot] New discussion proposal for u-boot summit: "switch malloc to succeed or die model, as glib does"   Detlev Zundel
• [U-Boot] [PATCH] novena: Fix ethernet PHY reset sequence   picmaster at mail.bg
• [U-Boot] Discussion topics / issues   Jeroen Hofstee
• [U-Boot] [RFC PATCH] genboardscfg.py: use Python2 from default path   Jeroen Hofstee
• [U-Boot] [PATCH] novena: Fix ethernet PHY reset sequence   Fabio Estevam
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Jeroen Hofstee
• [U-Boot] [PATCH v3 0/6] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH v3 1/6] sunxi: Add mmc card-detect functionality   Hans de Goede
• [U-Boot] [PATCH v3 2/6] sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option   Hans de Goede
• [U-Boot] [PATCH v3 3/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Hans de Goede
• [U-Boot] [PATCH v3 4/6] sunxi: Use PG3 - PG8 as io-pins for mmc1   Hans de Goede
• [U-Boot] [PATCH v3 5/6] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code   Hans de Goede
• [U-Boot] Broken target   Otavio Salvador
• [U-Boot] [PATCH v3 3/6] sunxi: When we've both mmc0 and mmc2, detect from which one we're booting   Ian Campbell
• [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code   Ian Campbell
• [U-Boot] [PATCH v3 0/6] sunxi: Enable second sdcard slot found on some boards   Ian Campbell
• [U-Boot] [PATCH v3 0/6] sunxi: Enable second sdcard slot found on some boards   Hans de Goede
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Simon Glass
• [U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support   Simon Glass
• [U-Boot] [RFC PATCH 01/12] dm: core: Allow access to the device's driver_id data   Simon Glass
• [U-Boot] [RFC PATCH 02/12] dm: core: Add functions to find parent and OF data   Simon Glass
• [U-Boot] [RFC PATCH 03/12] dm: i2c: Add a uclass for I2C   Simon Glass
• [U-Boot] [RFC PATCH 04/12] dm: i2c: Implement driver model support in the i2c command   Simon Glass
• [U-Boot] [RFC PATCH 05/12] dm: i2c: Add I2C emulation driver for sandbox   Simon Glass
• [U-Boot] [RFC PATCH 06/12] dm: i2c: Add a sandbox I2C driver   Simon Glass
• [U-Boot] [RFC PATCH 07/12] dm: i2c: Add an I2C EEPROM simulator   Simon Glass
• [U-Boot] [RFC PATCH 08/12] dm: i2c: config: Enable I2C for sandbox using driver model   Simon Glass
• [U-Boot] [RFC PATCH 09/12] dm: i2c: dts: Add an I2C bus for sandbox   Simon Glass
• [U-Boot] [RFC PATCH 10/12] dm: WIP: EEPROM driver   Simon Glass
• [U-Boot] [RFC PATCH 11/12] dm: i2c: Add tests for I2C   Simon Glass
• [U-Boot] [RFC PATCH 12/12] dm: i2c: tegra: Convert to driver model for I2C for seaboard   Simon Glass
• [U-Boot] [PATCH] imx: mx6 sabreauto: Add board support for USB EHCI   Li Ye-B37916
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Jeroen Hofstee
• [U-Boot] [PATCH v3 0/6] sunxi: Enable second sdcard slot found on some boards   Ian Campbell
• [U-Boot] [PATCH 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3   Ye.Li
• [U-Boot] [PATCH 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Ye.Li
• [U-Boot] Broken target   Tom Rini
• [U-Boot] [PATCH v2 1/2] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH resend] kconfig: Fix compiler warning in menu.c   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX   Ye.Li
• [U-Boot] [PATCH 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3   Ye.Li
• [U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms   Yuantian Tang
• [U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms   Albert ARIBAUD
• [U-Boot] [PATCH] imx: mx6 sabreauto: Add board support for USB EHCI   Fabio Estevam
• [U-Boot] [PATCH v4 1/1] Enable Android Fastboot support on am335x_evm board   Dileep Katta
• [U-Boot] Broken target   Otavio Salvador
• [U-Boot] [PATCH v2] imx: mx6 sabreauto: Add board support for USB EHCI   Ye.Li
• [U-Boot] Broken target   Tom Rini
• [U-Boot] [PATCH] Makefile: drop "tools-only" from no-dot-config-targets   Tom Rini
• [U-Boot] [PATCH fix for v2014.10] sunxi: axp152: dcdc3 scale is 50mV / step   Hans de Goede
• [U-Boot] [PATCH fix for v2014.10] sunxi: axp152: dcdc3 scale is 50mV / step not 25mV / step   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Hans de Goede
• [U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Maxime Ripard
• [U-Boot] [PATCH v2] imx: mx6 sabreauto: Add board support for USB EHCI   Fabio Estevam
• [U-Boot] [PATCH fix for v2014.10] sunxi: axp152: dcdc3 scale is 50mV / step not 25mV / step   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX   Otavio Salvador
• [U-Boot] [PATCH 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Fabio Estevam
• [U-Boot] Broken target   Otavio Salvador
• [U-Boot] [PATCH 0/4] Deep sleep patches for Freescale QorIQ platforms   Yuantian Tang
• [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] dm: Should U-Boot driver model abandon platform data?   Simon Glass
• [U-Boot] [PATCH v8 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH v4 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH v4 01/29] sandbox: dts: Add a SPI device and cros_ec device   Simon Glass
• [U-Boot] [PATCH v4 02/29] dm: core: Add functions for iterating through device children   Simon Glass
• [U-Boot] [PATCH v4 03/29] dm: core: Allow parents to pass data to children during probe   Simon Glass
• [U-Boot] [PATCH v4 04/29] dm: core: Add a clarifying comment on struct udevice's seq member   Simon Glass
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v4 06/29] dm: sandbox: Add a SPI emulation uclass   Simon Glass
• [U-Boot] [PATCH v4 07/29] dm: Remove spi_init() from board_r.c when using driver model   Simon Glass
• [U-Boot] [PATCH v4 08/29] dm: Add spi.h header to a few files   Simon Glass
• [U-Boot] [PATCH v4 09/29] dm: spi: Adjust cmd_spi to work with driver model   Simon Glass
• [U-Boot] [PATCH v4 10/29] dm: sandbox: spi: Move to driver model   Simon Glass
• [U-Boot] [PATCH v4 11/29] dm: spi: Rename soft_spi.c to soft_spi_legacy.c   Simon Glass
• [U-Boot] [PATCH v4 12/29] dm: spi: Remove SPI_INIT feature   Simon Glass
• [U-Boot] [PATCH v4 13/29] dm: spi: Add soft_spi implementation   Simon Glass
• [U-Boot] [PATCH v4 14/29] dm: exynos: Convert SPI to driver model   Simon Glass
• [U-Boot] [PATCH v4 15/29] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
• [U-Boot] [PATCH v4 16/29] exynos: universal_c210: Move to driver model soft_spi   Simon Glass
• [U-Boot] [PATCH v4 17/29] sf: Tidy up public and private header files   Simon Glass
• [U-Boot] [PATCH v4 18/29] spi: Use error return value in sf_ops   Simon Glass
• [U-Boot] [PATCH v4 19/29] dm: sf: Add a uclass for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 20/29] dm: Convert spi_flash_probe() and 'sf probe' to use driver model   Simon Glass
• [U-Boot] [PATCH v4 21/29] dm: sf: sandbox: Convert SPI flash driver to driver model   Simon Glass
• [U-Boot] [PATCH v4 22/29] dm: exynos: config: Use driver model for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 23/29] dm: spi: Add tests   Simon Glass
• [U-Boot] [PATCH v4 24/29] dm: sf: Add tests for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 25/29] dm: tegra: dts: Add aliases for spi on tegra30 boards   Simon Glass
• [U-Boot] [PATCH v4 26/29] dm: tegra: spi: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v4 27/29] dm: cros_ec: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v4 28/29] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module   Simon Glass
• [U-Boot] [PATCH v4 29/29] dm: exynos: cros_ec: Move cros_ec_spi to driver model   Simon Glass
• [U-Boot] [PATCH v3 1/4] QuadSPI: use QSPI_CMD_xx instead of flash opcodes   Peng Fan
• [U-Boot] [PATCH v3 2/4] QuadSPI: use correct amba_base   Peng Fan
• [U-Boot] [PATCH v3 3/4] arm:mx6sx add QSPI support   Peng Fan
• [U-Boot] [PATCH v3 4/4] imx:mx6sxsabresd add qspi support   Peng Fan
• [U-Boot] [PATCH v2 1/2] net: Add a command to access the EEPROM from ethernet devices   Joe Hershberger
• [U-Boot] [PATCH v2 1/2] mmc: fsl_esdhc: Update esdhc driver for iMX6SX   Ye.Li
• [U-Boot] [PATCH v2 2/2] imx: mx6sxsabresd: Add board support for USDHC2 and USDHC3   Ye.Li
• [U-Boot] [PATCH v2 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3   Ye.Li
• [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Ye.Li
• [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards   Simon Glass
• [U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] Broken target   Tom Rini
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH] Makefile: drop "tools-only" from no-dot-config-targets   Tom Rini
• [U-Boot] [ANN] U-Boot v2014.10 released   Tom Rini
• [U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes   Tom Rini
• [U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes   Tom Rini
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Valentin Longchamp
• [U-Boot] [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS   Valentin Longchamp
• [U-Boot] [PATCH] dm: serial: Fix breakage due to stdio changes   Simon Glass
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Ian Campbell
• [U-Boot] [PATCH v2 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Fabio Estevam
• [U-Boot] dm: Should U-Boot driver model abandon platform data?   Jagan Teki
• [U-Boot] [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS   Prafulla Wadaskar
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Matthias Fuchs
• [U-Boot] [PATCH] Kconfig: Add EXPERT option   Tom Rini
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Holger Brunck
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Matthias Fuchs
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Valentin Longchamp
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Stephen Warren
• [U-Boot] [PATCH v3 1/3] net: Add a command to manipulate ethernet devices   Alban Bedel
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH v3 3/3] usb: eth: smsc95xx: Add EEPROM access support for LAN9514   Alban Bedel
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Tom Warren
• [U-Boot] [PATCH v3] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   York Sun
• [U-Boot] [PATCH] powerpc/t104xrdb: make T104x board compliant in u-boot   York Sun
• [U-Boot] [PATCH 1/2] video: ipo: fix debug and comment   Jeroen Hofstee
• [U-Boot] [PATCH 2/2] video: ipu_disp: remove pixclk fixup   Jeroen Hofstee
• [U-Boot] [PATCH v2] ARM: tegra: Use mem size from MC in combination with get_ram_size()   Stephen Warren
• [U-Boot] [PATCH 2/4] qe: add u-qe support to arm board   York Sun
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Joe Hershberger
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Simon Glass
• [U-Boot] [PATCH v2] powerpc/mpc85xx: modify erratum A007186   York Sun
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   York Sun
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   Ashish Kumar
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   York Sun
• [U-Boot] [PATCH v2 4/7] common: spl: Add interactive DDR debugger support for SPL   York Sun
• [U-Boot] [PATCH v2 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   York Sun
• [U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board   York Sun
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Marek Vasut
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Albert ARIBAUD
• [U-Boot] [PATCH] Kconfig: Add EXPERT option   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Tom Warren
• [U-Boot] [U-boot] [Patch v4 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 4/6] ARM: keystone2: spl: add K2L SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [PATCH v3] powerpc/mpc85xx: modify erratum A007186   Zhao Qiang
• [U-Boot] [PATCH 1/2] powerpc/mpc85xx:Put errata number for T104x NAND boot issue   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] board/t104xrdb: Conditional workaround of errata A-008044   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] powerpc/mpc85xx: modify erratum A007186   Zhao Qiang
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH 1/2][v3] fsl_sec: Add hardware accelerated SHA256 and SHA1   Ruchika Gupta
• [U-Boot] [PATCH 2/2][v3] mpc85xx: configs - Add hash command in freescale platforms   Ruchika Gupta
• [U-Boot] [PATCH] Kconfig: Add EXPERT option   Tom Rini
• [U-Boot] [PATCH][v4] ls102x: configs - Add hash command in freescale LS1 platforms   Ruchika Gupta
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Albert ARIBAUD
• [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
• [U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board   Huan Wang
• [U-Boot] [PATCH v2 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Huan Wang
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Simon Glass
• [U-Boot] [PATCH 1/2][v3] fsl_sec: Add hardware accelerated SHA256 and SHA1   Simon Glass
• [U-Boot] [PATCH 0/3] Serial Flash: call spi_flash_free more coherently   Jagan Teki
• [U-Boot] [PATCH 2/2] video: ipu_disp: remove pixclk fixup   Jeroen Hofstee
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH 02/11] fdt: Report failure of ft_board_setup()   Simon Glass
• [U-Boot] [PATCH 03/11] fdt: Export the fdt_find_or_add_subnode() function   Simon Glass
• [U-Boot] [PATCH 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH 05/11] fdt: Use the correct return types for fdtdec_decode_region()   Simon Glass
• [U-Boot] [PATCH 06/11] fdt: Enhance flashmap function to deal with region properties   Simon Glass
• [U-Boot] [PATCH 07/11] fdt: Tidy up error handling in image_setup_libfdt()   Simon Glass
• [U-Boot] [PATCH 08/11] fdt: Add ft_system_setup() function for system device tree additions   Simon Glass
• [U-Boot] [PATCH 09/11] fdt: Change fdt_pack_reg() to static and fix types   Simon Glass
• [U-Boot] [PATCH 10/11] fdt: Add a function to decode a named memory region   Simon Glass
• [U-Boot] [PATCH 11/11] fdt: Try to use fdt_address_cells()/fdt_size_cells()   Simon Glass
• [U-Boot] [PATCH] patman: Use the full commit hash for 'git checkout'   Simon Glass
• [U-Boot] [PATCH v9 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH v9 01/12] dm: exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v9 02/12] dm: exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v9 03/12] dm: exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v9 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v9 05/12] dm: exynos: Add pinctrl settings for smdkc100   Simon Glass
• [U-Boot] [PATCH v9 06/12] dm: exynos: Add pinctrl settings for s5p_goni   Simon Glass
• [U-Boot] [PATCH v9 07/12] dm: exynos: Move smdkc100 to generic board   Simon Glass
• [U-Boot] [PATCH v9 08/12] dm: exynos: Move s5p_goni to generic board   Simon Glass
• [U-Boot] [PATCH v9 09/12] dm: exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v9 10/12] dm: exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v9 11/12] dm: exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] puts() and newlines (was Re: Discussion topics / issues)   Pavel Machek
• [U-Boot] [PATCH for-next] arndale: Enable config_distro_defaults.h   Ian Campbell
• [U-Boot] Fw: [PATCH 1/2][v3] fsl_sec: Add hardware accelerated SHA256 and SHA1   Ruchika Gupta
• [U-Boot] [PATCH] fdt_support: fix unaligned u64 accesses in fdt_fixup_memory_banks   Rob Herring
• [U-Boot] [PATCH v2 4/7] common: spl: Add interactive DDR debugger support for SPL   Huan Wang
• [U-Boot] puts() and newlines (was Re: Discussion topics / issues)   Pavel Machek
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH 1/2] sunxi: axp152: Keep DRAM / Vddr at bootloader set value   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: nand: Fix nand clk calculation   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: axp152: Keep DRAM / Vddr at bootloader set value   Hans de Goede
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Hans de Goede
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Marc Zyngier
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Albert ARIBAUD
• [U-Boot] [PATCH 6/7] arm: ls102xa: Add SD boot support for LS1021AQDS board   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Marc Zyngier
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Siarhei Siamashka
• [U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()   Simon Glass
• [U-Boot] [PATCH 01/10] Provide option to avoid defining a custom version of uintptr_t.   Simon Glass
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH 03/10] ext4: Use inttypes for printf() string   Simon Glass
• [U-Boot] [PATCH 04/10] Use uint64_t for time types   Simon Glass
• [U-Boot] [PATCH 05/10] Use uint64_t instead of u64 in put_dec()   Simon Glass
• [U-Boot] [PATCH 06/10] Tidy up data sizes and function comment in display_options   Simon Glass
• [U-Boot] [PATCH 07/10] x86: Use correct printf() format string for uintptr_t   Simon Glass
• [U-Boot] [PATCH 08/10] scsi: Use correct printf() format string for uintptr_t   Simon Glass
• [U-Boot] [PATCH 09/10] usb: Use correct printf() format string for uintptr_t   Simon Glass
• [U-Boot] [PATCH 10/10] test: Add a simple test to detected warnings with uint64_t, uintptr_t   Simon Glass
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Marc Zyngier
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Siarhei Siamashka
• [U-Boot] [PATCH] lcd: Fix build error with CONFIG_LCD_BMP_RLE8   Simon Glass
• [U-Boot] [PATCH for-next] arndale: Enable config_distro_defaults.h   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Albert ARIBAUD
• [U-Boot] u-boot:arm:Boot MLO and U-boot img from nand flash for omap4460   Anand Kumar
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Marc Zyngier
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Simon Glass
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Mark Rutland
• [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR   York Sun
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   York Sun
• [U-Boot] [PATCH V2 0/5] Add EXT filesystem support to SPL   Guillaume GARDET
• [U-Boot] [PATCH V2 1/5] Rename some defines containing FAT in their name to be filesystem generic   Guillaume GARDET
• [U-Boot] [PATCH V2 2/5] spl: Add EXT support to SPL   Guillaume GARDET
• [U-Boot] [PATCH V2 3/5] doc: Update documentation according to the EXT SPL support patch set   Guillaume GARDET
• [U-Boot] [PATCH V2 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT.   Guillaume GARDET
• [U-Boot] [PATCH V2 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards   Guillaume GARDET
• [U-Boot] [PATCH 1/2][v3] fsl_sec: Add hardware accelerated SHA256 and SHA1   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Tom Warren
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Albert ARIBAUD
• [U-Boot] buildman: display list of boards with warnings/errors during build?   Simon Glass
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Stephen Warren
• [U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v2 1/6] Exynos5800: Introduce new proid for Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v2 2/6] Exynos5800: Add DTS for new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v2 3/6] Config: Exynos5800: Enable build for Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v2 4/6] DMC: Exynos5: Enable update mode for DREX controller   Akshay Saraswat
• [U-Boot] [PATCH v2 5/6] Config: Exynos5420: Refactor SDRAM Bank and Size   Akshay Saraswat
• [U-Boot] [PATCH v2 6/6] Exynos5: ddr3: Choose between single or double channel config   Akshay Saraswat
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Marc Zyngier
• [U-Boot] [U-boot] [Patch v5 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 4/6] ARM: keystone2: spl: move board specific code   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v5 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables   Simon Glass
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] dm: Should U-Boot driver model abandon platform data?   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Siarhei Siamashka
• [U-Boot] [PATCH] ARM: bootm: Allow booting in secure mode on hyp capable systems   Siarhei Siamashka
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Sean Cross
• [U-Boot] [PATCH v4] powerpc/85xx: enable some P1/P2 boards mtdparts for nor flash   Yangbo Lu
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Yuantian Tang
• [U-Boot] [PATCH] aboot: fix block addressing for don't care chunk type   Rob Herring
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   York Sun
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Yuantian Tang
• [U-Boot] Pushing drive model patches to u-boot-dm/next   Simon Glass
• [U-Boot] [PATCH 1/2] buildman: Fix repeating board list with -l   Simon Glass
• [U-Boot] [PATCH 2/2] buildman: Don't default to -e when building current source   Simon Glass
• [U-Boot] [PATCH 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Fix GDT limit in start16.S   Bin Meng
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Jeroen Hofstee
• [U-Boot] [PATCH 1/2] video: ipo: fix debug and comment   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: ipu_disp: remove pixclk fixup   Anatolij Gustschin
• [U-Boot] Hi all, Can not start the latest version of uboot on Foundation platform on ARM v8 (vexpress_aemv8a_config)   Duxiaoqiang
• [U-Boot] [PATCH] lcd: Fix build error with CONFIG_LCD_BMP_RLE8   Anatolij Gustschin
• [U-Boot] U-Boot Sunxi breaks LCD output on Olimex Lime A10   Siarhei Siamashka
• [U-Boot] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support   Anatolij Gustschin
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Ian Campbell
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Siarhei Siamashka
• [U-Boot] [PATCH 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Simon Glass
• [U-Boot] [PATCH 2/2] x86: Fix GDT limit in start16.S   Simon Glass
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] Hi all, Can not start the latest version of uboot on Foundation platform on ARM v8 (vexpress_aemv8a_config)   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h   Ian Campbell
• [U-Boot] [PATCH v2 2/2] exynos5: Use config_distro_bootcmd.h   Ian Campbell
• [U-Boot] [PATCH 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Bin Meng
• [U-Boot] [PATCH v2 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Bin Meng
• [U-Boot] [PATCH v2 2/2] x86: Fix GDT limit in start16.S   Bin Meng
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] tools-only build broken   Otavio Salvador
• [U-Boot] [PATCH] sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i   Siarhei Siamashka
• [U-Boot] [PATCH] arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register name   Anatolij Gustschin
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Jeroen Hofstee
• [U-Boot] tools-only build broken   Marek Vasut
• [U-Boot] [U-boot] [Patch v2 0/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/4] dma: ti-edma3: introduce edma3 driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 2/4] ARM: keystone: msmc: extend functionality of SES   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 3/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 4/4] ARM: keystone: cmd_ddr3: add ddr3 commands to test ddr   Ivan Khoronzhuk
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Fabio Estevam
• [U-Boot] [PATCH] drivers : usb: fsl: Implement usb Erratum A007798 workaround   Nikhil Badola
• [U-Boot] [PATCH] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] [PATCH 1/1] imx: iomux: fix incorrect reference of pad names in macros   Edward Lin
• [U-Boot] [PATCH 1/2] drivers: usb: fsl: Define USB configs for LS102XA   Nikhil Badola
• [U-Boot] [PATCH 2/2] ls1: config: Enable USB EHCI Host on LS1021AQDS   Nikhil Badola
• [U-Boot] [PATCH v2 1/5] arm: ls102xa: Add snoop disable for slave port 0, 1 and 2   Alison Wang
• [U-Boot] [PATCH v2 2/5] arm: ls102xa: Remove bit reversing for SCFG registers   Alison Wang
• [U-Boot] [PATCH v2 3/5] ls102xa: ifc: nor: fix the write issue when bytes unaligned   Alison Wang
• [U-Boot] [PATCH v2 4/5] arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v2 5/5] arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing   Alison Wang
• [U-Boot] [PATCH v3 0/8] Add SD/NAND boot support for LS1021AQDS/TWR board   Alison Wang
• [U-Boot] [PATCH v3 1/8] ls102xa: pblimage: Add pblimage tool support for LS102xA   Alison Wang
• [U-Boot] [PATCH v3 2/8] spl: Use u-boot.img instead of u-boot.bin   Alison Wang
• [U-Boot] [PATCH v3 3/8] arm: spl: Add I2C linker list in generic .lds   Alison Wang
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   Alison Wang
• [U-Boot] [PATCH v3 5/8] ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro   Alison Wang
• [U-Boot] [PATCH v3 6/8] arm: ls102xa: Add SD boot support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH v3 7/8] arm: ls102xa: Add SD boot support for LS1021ATWR board   Alison Wang
• [U-Boot] [PATCH v3 8/8] arm: ls102xa: Add NAND boot support for LS1021AQDS board   Alison Wang
• [U-Boot] [PATCH] P1023RDB: Update default environment   Chunhe Lan
• [U-Boot] [PATCH v1 2/2] odroid: usb: add support for usb host including ethernet   Jaehoon Chung
• [U-Boot] problem with eMMC boot on arndale board   Guillaume Gardet
• [U-Boot] [PATCH] board/t2080qds: add readme for t2080qds   Shengzhou Liu
• [U-Boot] problem with eMMC boot on arndale board   Ian Campbell
• [U-Boot] problem with eMMC boot on arndale board   Michael Trimarchi
• [U-Boot] problem with eMMC boot on arndale board   Anatolij Gustschin
• [U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [linux-sunxi] Re: [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Chen-Yu Tsai
• [U-Boot] Mini Summit 2014 Followup / Transcript of Open Discussion   Detlev Zundel
• [U-Boot] tools-only build broken   Otavio Salvador
• [U-Boot] tools-only build broken   Marek Vasut
• [U-Boot] [PATCH] P1023RDB: Update default environment   York Sun
• [U-Boot] [PATCH] aboot: fix block addressing for don't care chunk type   Steve Rae
• [U-Boot] [U-boot] [Patch v3 0/5] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 1/5] soc: add soc specific drivers directory   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 2/5] soc: keystone_serdes: create a separate SGMII SerDes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 3/5] soc: keystone_serdes: enhance to use cmu/comlane/lane specific configurations   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 4/5] soc: keystone_serdes: generalize to be used by other sub systems   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 5/5] soc: keystone_serdes: generalize configuration mechanism   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 0/5] keystone_net: use MDIO bus and eth PHY frameworks   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/5] net: phy: print a number of phy that is not found   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 2/5] net: keystone_net: use mdio_reset function   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 3/5] net: keystone_net: register MDIO bus   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 4/5] net: keystone_net: register eth PHYs on MDIO bus   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 5/5] net: keystone_net: use general get link function   Ivan Khoronzhuk
• [U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH v2 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Simon Glass
• [U-Boot] [PATCH v2 2/2] x86: Fix GDT limit in start16.S   Simon Glass
• [U-Boot] [U-boot] [Patch v2 0/6] keystone2: add network support for K2E SoC and EVM   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 1/6] ARM: keystone2: keysonte_nav: add support for K2E SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 2/6] net: keystone_serdes: add keystone K2E SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 3/6] net: keystone_net: add Keystone2 K2E SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 4/6] net: keystone_net: increase PHY auto negotiate time   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 5/6] ARM: keystone: clock: add support for K2E SoCs   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 6/6] board: k2e_evm: add network support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 0/5] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 0/5] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 0/5] keystone_net: use MDIO bus and eth PHY frameworks   Ivan Khoronzhuk
• [U-Boot] [PATCH v1 2/2] odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [U-boot] [Patch v2 0/6] keystone2: add network support for K2E SoC and EVM   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2 0/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Suriyan Ramasami
• [U-Boot] [PATCH v1 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB in ls and size commands   Simon Glass
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Simon Glass
• [U-Boot] [PATCH] image: Fix Android boot image support   Simon Glass
• [U-Boot] [PATCH 01/11] fdt: Allow ft_board_setup() to report failure   Anatolij Gustschin
• [U-Boot] [PATCH 02/11] fdt: Report failure of ft_board_setup()   Anatolij Gustschin
• [U-Boot] [RFC] net/e1000: Fix EEPROM access error   York Sun
• [U-Boot] [PATCH 03/11] fdt: Export the fdt_find_or_add_subnode() function   Anatolij Gustschin
• [U-Boot] [PATCH 05/11] fdt: Use the correct return types for fdtdec_decode_region()   Anatolij Gustschin
• [U-Boot] [PATCH 06/11] fdt: Enhance flashmap function to deal with region properties   Anatolij Gustschin
• [U-Boot] [PATCH 09/11] fdt: Change fdt_pack_reg() to static and fix types   Anatolij Gustschin
• [U-Boot] [PATCH 08/11] fdt: Add ft_system_setup() function for system device tree additions   Anatolij Gustschin
• [U-Boot] [RFC] net/e1000: Fix EEPROM access error   Marek Vasut
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi   Simon Glass
• [U-Boot] [PATCH] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] [PATCH 1/1] ARM: sheevaplug: add LIBFDT support   Gerald Kerma
• [U-Boot] [PATCH 2/2] ARM: sheevaplug: fix ENV offset and MTDPARTS   Gerald Kerma
• [U-Boot] [PATCH 07/11] fdt: Tidy up error handling in image_setup_libfdt()   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH 2/2] video: speedup writing strings to fb console   Soeren Moch
• [U-Boot] [PATCH] Kconfig: Add EXPERT option   Masahiro YAMADA
• [U-Boot] tps65910x I2C RTC driver   Dvorkin Dmitry
• [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard   Jeroen Hofstee
• [U-Boot] [PATCH] generic-board: make compile-time noise for non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH] generic-board: make compile-time noise for non-generic boards   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Move code from misc_init_r() to arch_early_init_r()   Marek Vasut
• [U-Boot] [PATCH] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Marek Vasut
• [U-Boot] [PATCH 2/7] spi: altera: Clean up bit definitions   Marek Vasut
• [U-Boot] [PATCH 3/7] spi: altera: Clean up most checkpatch issues   Marek Vasut
• [U-Boot] [PATCH 4/7] spi: altera: Zap endless loop   Marek Vasut
• [U-Boot] [PATCH 5/7] spi: altera: Clean up the use of variable d   Marek Vasut
• [U-Boot] [PATCH 6/7] spi: altera: Add short note about EPCS/EPCQx1   Marek Vasut
• [U-Boot] [PATCH 7/7] spi: altera: Move the config options to the top   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Zap spl.h and ad-hoc related syms   Marek Vasut
• [U-Boot] [SoCFPGA] next steps   Marek Vasut
• [U-Boot] [PATCH 1/4] i2c: mxs: Consolidate hard-coded bus address   Marek Vasut
• [U-Boot] [PATCH 2/4] i2c: mxs: Add basic support for i2c framework   Marek Vasut
• [U-Boot] [PATCH 3/4] i2c: mxs: Pass the i2c_adapter around   Marek Vasut
• [U-Boot] [PATCH 4/4] i2c: mxs: Add support for I2C 1 on i.MX28   Marek Vasut
• [U-Boot] generic-board: make compile-time noise for non-generic boards   Vagrant Cascadian
• [U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses   Marek Vasut
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Marek Vasut
• [U-Boot] [PATCH 02/25] ppc: Zap MHPC board   Marek Vasut
• [U-Boot] [PATCH 03/25] ppc: Zap Hymod board   Marek Vasut
• [U-Boot] [PATCH 04/25] ppc: Zap HWW1U1A board   Marek Vasut
• [U-Boot] [PATCH 05/25] ppc: Zap IDS8247 board   Marek Vasut
• [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board   Marek Vasut
• [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board   Marek Vasut
• [U-Boot] [PATCH 08/25] arm: Zap tricorder-eeprom   Marek Vasut
• [U-Boot] [PATCH 09/25] eeprom: Shuffle code around   Marek Vasut
• [U-Boot] [PATCH 10/25] eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS   Marek Vasut
• [U-Boot] [PATCH 11/25] eeprom: Zap CONFIG_SYS_EEPROM_X40430   Marek Vasut
• [U-Boot] [PATCH 12/25] eeprom: Zap eeprom_probe()   Marek Vasut
• [U-Boot] [PATCH 13/25] eeprom: Zap CONFIG_SPI_X   Marek Vasut
• [U-Boot] [PATCH 14/25] eeprom: Pull out the I/O code   Marek Vasut
• [U-Boot] [PATCH 15/25] eeprom: Pull out address computation   Marek Vasut
• [U-Boot] [PATCH 16/25] eeprom: Make eeprom_write_enable() weak   Marek Vasut
• [U-Boot] [PATCH 17/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   Marek Vasut
• [U-Boot] [PATCH 18/25] eeprom: Suck the ifdef into eeprom_init()   Marek Vasut
• [U-Boot] [PATCH 19/25] eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS   Marek Vasut
• [U-Boot] [PATCH 20/25] eeprom: Pull out transfer length computation   Marek Vasut
• [U-Boot] [PATCH 21/25] eeprom: Pull out the RW loop   Marek Vasut
• [U-Boot] [PATCH 22/25] eeprom: Cultivate the ifdef mess   Marek Vasut
• [U-Boot] [PATCH 23/25] eeprom: Add bus argument to eeprom_init()   Marek Vasut
• [U-Boot] [PATCH 24/25] eeprom: Add support for selecting i2c bus   Marek Vasut
• [U-Boot] [PATCH 25/25] eeprom: Clean up checkpatch issues   Marek Vasut
• [U-Boot] [PATCH v3 0/6] x86: Enable FIT images on x86   Simon Glass
• [U-Boot] [PATCH v3 1/6] x86: Enable LMB and RAMDISK_HIGH by default   Simon Glass
• [U-Boot] [PATCH v3 2/6] x86: Rewrite bootm.c to make it similar to ARM   Simon Glass
• [U-Boot] [PATCH v3 3/6] x86: Allow cmdline setup in setup_zimage() to be optional   Simon Glass
• [U-Boot] [PATCH v3 4/6] sandbox: bootm: Don't fail the architecture check   Simon Glass
• [U-Boot] [PATCH v3 5/6] doc: Tidy up and update part of the FIT documentation   Simon Glass
• [U-Boot] [PATCH v3 6/6] x86: Support loading kernel setup from a FIT   Simon Glass
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Masahiro Yamada
• [U-Boot] [PATCH] arm: socfpga: Add I2C support to SoCFPGA   Stefan Roese
• [U-Boot] [PATCH] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: Move code from misc_init_r() to arch_early_init_r()   Pavel Machek
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: Zap spl.h and ad-hoc related syms   Pavel Machek
• [U-Boot] [PATCH v2] powerpc/t4rdb: Add support of CPLD   Chunhe Lan
• [U-Boot] [PATCH] common/cmd_io.c: Fix incorrect help for iod/iow   Bin Meng
• [U-Boot] [PATCH v4 0/2] Introduce CONFIG_SUPPORT_SPL/TPL   Masahiro Yamada
• [U-Boot] [PATCH v4 1/2] kconfig: add CONFIG_SUPPORT_SPL   Masahiro Yamada
• [U-Boot] [PATCH v4 2/2] kconfig: add CONFIG_SUPPORT_TPL   Masahiro Yamada
• [U-Boot] [PATCH v3 0/5] ls102xa: HYP/non-sec: for ls102xa.   Xiubo Li
• [U-Boot] [PATCH v3 1/5] ARM: HYP/non-sec: add the pen address BE mode support.   Xiubo Li
• [U-Boot] [PATCH v3 2/5] ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.   Xiubo Li
• [U-Boot] [PATCH v3 3/5] ls102xa: HYP/non-sec: support for ls102xa boards   Xiubo Li
• [U-Boot] [PATCH v3 4/5] ARM: ls102xa: allow all the peripheral access permissions as R/W.   Xiubo Li
• [U-Boot] [PATCH v3 5/5] ARM: ls102xa: Setting device's stream id for SMMUs.   Xiubo Li
• [U-Boot] Mini Summit 2014 Followup / Transcript of Open Discussion   Michal Simek
• [U-Boot] [PATCH] config: MPC837X : Add complete USB EHCI support   Nikhil Badola
• [U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent   Nikhil Badola
• [U-Boot] [PATCH] ARM: UniPhier: make pinmon command optional   Masahiro Yamada
• [U-Boot] [PATCH 1/2][v2] powerpc/t2080qds: fixup dtb for 10g-kr   Shaohui Xie
• [U-Boot] [PATCH 2/2][v2] powerpc/t2080qds: fix for 1000BASE-KX   shh.xie at gmail.com
• [U-Boot] [PATCH] arm: socfpga: Add I2C support to SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Marek Vasut
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Jagan Teki
• [U-Boot] [PATCH v9 0/12] Enable driver model for GPIOs on Tegra and Exynos   Przemyslaw Marczak
• [U-Boot] [PATCH v9 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Przemyslaw Marczak
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] DM9000 support for multiple interfaces   Andrew Ruder
• [U-Boot] [PATCH 1/3] dm9000: mark dump_regs() function as unused   Andrew Ruder
• [U-Boot] [PATCH 2/3] dm9000: Add struct eth_device * to SROM functions   Andrew Ruder
• [U-Boot] [PATCH 3/3] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
• [U-Boot] [PATCH 4/7] spi: altera: Zap endless loop   Jagan Teki
• [U-Boot] [PATCH 6/7] spi: altera: Add short note about EPCS/EPCQx1   Jagan Teki
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Marek Vasut
• [U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards   Tom Rini
• [U-Boot] [PATCH 6/7] spi: altera: Add short note about EPCS/EPCQx1   Marek Vasut
• [U-Boot] [U-boot] [Patch v4 2/6] keystone2: clock: add K2L clock definitions and commands   Tom Rini
• [U-Boot] [U-boot] [Patch v4 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Tom Rini
• [U-Boot] [U-boot] [Patch v4 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
• [U-Boot] [PATCH 2/3] dm9000: Add struct eth_device * to SROM functions   Stefano Babic
• [U-Boot] [PATCH v9 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH] arm: tegra: use architecture specific memcpy   Marcel Ziswiler
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [U-boot] [Patch v4 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Przemyslaw Marczak
• [U-Boot] [PATCH 06/19] dm: common: board_r: add call and weak of power_init_dm()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/3] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Simon Glass
• [U-Boot] puts() and newlines (was Re: Discussion topics / issues)   Tom Rini
• [U-Boot] [PATCH 04/19] dm: pmic: add implementation of driver model pmic uclass   Przemyslaw Marczak
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Przemyslaw Marczak
• [U-Boot] [U-boot] [Patch v4 2/6] keystone2: clock: add K2L clock definitions and commands   Tom Rini
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Przemyslaw Marczak
• [U-Boot] [PATCH] common/cmd_io.c: Fix incorrect help for iod/iow   Simon Glass
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Jagan Teki
• [U-Boot] [PATCH v9 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH 6/7] spi: altera: Add short note about EPCS/EPCQx1   Jagan Teki
• [U-Boot] [PATCH v2 1/3] arm: odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH v2 2/3] arm: odroid: enable/disable usb host phy for exynos4412   Suriyan Ramasami
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Wolfgang Denk
• [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard   Jeroen Hofstee
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Wolfgang Denk
• [U-Boot] [PATCH 06/25] ppc: Zap TQM8260 board   Wolfgang Denk
• [U-Boot] [PATCH 07/25] ppc: Zap TQM8272 board   Wolfgang Denk
• [U-Boot] [PATCH 1/3] dm9000: mark dump_regs() function as unused   Tom Rini
• [U-Boot] [PATCH 2/3] dm9000: Add struct eth_device * to SROM functions   Tom Rini
• [U-Boot] [PATCH 2/3] dm9000: Add struct eth_device * to SROM functions   Andrew Ruder
• [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Tom Rini
• [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
• [U-Boot] [PATCH] checkpatch: Add a check for forbidden tags in the git log   Tom Rini
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH][v4] ls102x: configs - Add hash command in freescale LS1 platforms   York Sun
• [U-Boot] [PATCH] image: Fix Android boot image support   Simon Glass
• [U-Boot] [PATCH] image: Fix Android boot image support   Simon Glass
• [U-Boot] [RFC] net/e1000: Fix EEPROM access error   Marcel Ziswiler
• [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Tom Rini
• [U-Boot] [PATCH] common/cmd_io.c: Fix incorrect help for iod/iow   Bin Meng
• [U-Boot] [PATCH] common/cmd_io.c: Fix incorrect help for iod/iow   Simon Glass
• [U-Boot] [PATCH v10 0/12] Enable driver model for GPIOs on Tegra and Exynos   Simon Glass
• [U-Boot] [PATCH v10 01/12] dm: exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v10 02/12] dm: exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v10 03/12] dm: exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v10 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v10 05/12] dm: exynos: Add pinctrl settings for smdkc100   Simon Glass
• [U-Boot] [PATCH v10 06/12] dm: exynos: Add pinctrl settings for s5p_goni   Simon Glass
• [U-Boot] [PATCH v10 07/12] dm: exynos: Move smdkc100 to generic board   Simon Glass
• [U-Boot] [PATCH v10 08/12] dm: exynos: Move s5p_goni to generic board   Simon Glass
• [U-Boot] [PATCH v10 09/12] dm: exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v10 10/12] dm: exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v10 11/12] dm: exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v10 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH] common/cmd_io.c: Fix incorrect help for iod/iow   Bin Meng
• [U-Boot] Hi Simon, There may exist a problem about FIT image signature verify , can you check this problem?   Duxiaoqiang
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Masahiro Yamada
• [U-Boot] compile issue with U-boot-2014.10-rc2 & Cubieboard   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Masahiro Yamada
• [U-Boot] [PATCH] arm: ls102xa: fixed a bus frequency setting error   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH] arm: socfpga: Add I2C support to SoCFPGA   Heiko Schocher
• [U-Boot] [PATCH] fix get_ram_size memory corruption   Gerd Hoffmann
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Jeroen Hofstee
• [U-Boot] [PATCH 0/1] ls1021aqds: add hwconfig setting to do pin mux   Yuan Yao
• [U-Boot] [PATCH] ls1021aqds: add hwconfig setting to do pin mux   Yuan Yao
• [U-Boot] [PATCH 1/4] ARM: prevent compiler warnings from bootm.c   Stefano Babic
• [U-Boot] [PATCH 2/4] ARM: i.MX6: include prototype for get_board_rev()   Stefano Babic
• [U-Boot] [PATCH 3/4] ARM: i.MX: provide declaration for board_spi_cs_gpio   Stefano Babic
• [U-Boot] [PATCH 4/4] ARM: i.MX video: declare displays and display_count publicly   Stefano Babic
• [U-Boot] [PATCH] fix get_ram_size memory corruption   Wolfgang Denk
• [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs   Igor Grinberg
• [U-Boot] [PATCH] vexpress: qemu can load the fdt to ram base   Gerd Hoffmann
• [U-Boot] dm: Should U-Boot driver model abandon platform data?   Igor Grinberg
• [U-Boot] [PATCH] README.kconfig: fix typo   Igor Grinberg
• [U-Boot] [PATCH] fix get_ram_size memory corruption   Gerd Hoffmann
• [U-Boot] [PATCH] README.kconfig: fix typo   Masahiro Yamada
• [U-Boot] [PATCH] vexpress: qemu can load the fdt to ram base   Gerd Hoffmann
• [U-Boot] [PATCH] ls1:config: Add USB support for ls1021atwr   Ramneek Mehresh
• [U-Boot] [PATCH] ls1:config: Add XHCI support for ls1021aqds   Ramneek Mehresh
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH] arm: tegra: use architecture specific memcpy   Marcel Ziswiler
• [U-Boot] git bisect failed   Christian Gmeiner
• [U-Boot] [PATCH 1/7] powerpc: mpc512x: fix boot breakage   Anatolij Gustschin
• [U-Boot] [PATCH 2/7] powerpc: mpc5121ads: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 3/7] powerpc: pdm360ng: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 4/7] powerpc: aria: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 5/7] powerpc: ac14xx: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 6/7] powerpc: mecp5123: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 7/7] powerpc: digsy_mtc: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH] fix get_ram_size memory corruption   Wolfgang Denk
• [U-Boot] git bisect failed   Stefano Babic
• [U-Boot] [PATCH] ot1200: remove superfluous "string" tag   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6qsabreauto: Add HDMI support   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6sabre_common: Add HDMI config to common code   Stefano Babic
• [U-Boot] [PATCH] e1000: fix sw fw sync on igb i210/i211   Marcel Ziswiler
• [U-Boot] [PATCH] powerpc: mpc5121ads: update board config info in README   Anatolij Gustschin
• [U-Boot] [PATCH] fix get_ram_size memory corruption   Gerd Hoffmann
• [U-Boot] [PATCH v3] fix get_ram_size memory corruption   Gerd Hoffmann
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Alban Bedel
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Tom Rini
• [U-Boot] [PATCH 0/3] Minor cm-t35/cm-t3730 updates   Igor Grinberg
• [U-Boot] [PATCH 1/3] omap3: Kconfig: fix the cm-t35 board option prompt   Igor Grinberg
• [U-Boot] [PATCH 2/3] omap3: cm-t35: use define for mmc wp gpio   Igor Grinberg
• [U-Boot] [PATCH 3/3] omap3: cm-t35: remove enable_gpmc_cs_config()   Igor Grinberg
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] README.scrapyard: update commit IDs   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PowerPC: drop some 74xx_7xx boards and related code   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Albert ARIBAUD
• [U-Boot] [PATCH v3] fix get_ram_size memory corruption   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PowerPC: drop some 74xx_7xx boards and related code   Stefan Roese
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Albert ARIBAUD
• [U-Boot] [RFC] dm: tegra: boot time regression   Marcel Ziswiler
• [U-Boot] [PATCH] omap3/am33xx: mux: fix several checkpatch issues   Igor Grinberg
• [U-Boot] [PATCH] omap3/am33xx: mux: fix several checkpatch issues   Stefan Roese
• [U-Boot] [PATCH] doc: fix README.standalone   Masahiro Yamada
• [U-Boot] [PATCH] doc: fix README.standalone   Jeroen Hofstee
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Tom Rini
• [U-Boot] [RFC] dm: tegra: boot time regression   Simon Glass
• [U-Boot] [PATCH v3 2/3] net: Add a command to access the EEPROM from ethernet devices   Simon Glass
• [U-Boot] Hi Simon, There may exist a problem about FIT image signature verify , can you check this problem?   Simon Glass
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Tom Rini
• [U-Boot] [PATCH] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] git bisect failed   Tom Rini
• [U-Boot] git bisect failed   Fabio Estevam
• [U-Boot] [PATCH v2] memsize: Fix for bug in memory sizing code   Gerd Hoffmann
• [U-Boot] [PATCH v2] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] [PATCH] mmc: tegra: handle error returned from bounce_buffer_start   Michael Scott
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [RFC] MW rule and its period   Masahiro YAMADA
• [U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i   Ian Campbell
• [U-Boot] [linux-sunxi] Re: [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks   Ian Campbell
• [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code   Ian Campbell
• [U-Boot] [RFC] MW rule and its period   Otavio Salvador
• [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code   Tom Rini
• [U-Boot] [RFC] MW rule and its period   Wolfgang Denk
• [U-Boot] git bisect failed   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH 1/3] common/memsize.c: Coding style cleanup   Wolfgang Denk
• [U-Boot] [PATCH 2/3] common/memsize.c: correctly restore all modified memory loations   Wolfgang Denk
• [U-Boot] [PATCH v2] memsize: Fix for bug in memory sizing code   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: TQM5200: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 2/3] common/memsize.c: correctly restore all modified memory loations   Wolfgang Denk
• [U-Boot] "make help" talks about "starred" targets when nothing is starred   Robert P. J. Day
• [U-Boot] [PATCH] powerpc: o2dnt: convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH] Correct single misspelling of "consitant" in source tree.   Robert P. J. Day
• [U-Boot] [PATCH] Correct two non-functional misspellings "overrided".   Robert P. J. Day
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Tom Rini
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Marek Vasut
• [U-Boot] [PATCH v2] memsize: Fix for bug in memory sizing code   Gerd Hoffmann
• [U-Boot] [PATCH 2/3] common/memsize.c: correctly restore all modified memory loations   Gerd Hoffmann
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Fabio Estevam
• [U-Boot] git bisect failed   Fabio Estevam
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH] net: asix: Add support for AX88772B   Alexandre Courbot
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Ye.Li
• [U-Boot] [PATCH] net: macb: write mac address when initialization   Bo Shen
• [U-Boot] [PATCH] net: macb: write mac address when initialization   Boris Brezillon
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Stefano Babic
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Li Ye-B37916
• [U-Boot] [RFC] MW rule and its period   Stefano Babic
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Ian Campbell
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Stefano Babic
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Li Ye-B37916
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Hans de Goede
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Stefano Babic
• [U-Boot] [PATCH v2 0/8] ARM: sunxi: Add Allwinner A23 (sun8i) support   Chen-Yu Tsai
• [U-Boot] [PATCH v2 1/8] ARM: sunxi: Add sun8i (A23) UART0 pin mux support   Chen-Yu Tsai
• [U-Boot] [PATCH v2 2/8] ARM: sunxi: Add support for uart0 on port F (mmc0)   Chen-Yu Tsai
• [U-Boot] [PATCH v2 3/8] mmc: sunxi: Add support for sun8i (A23)   Chen-Yu Tsai
• [U-Boot] [PATCH v2 4/8] ARM: sunxi: Add basic A23 support   Chen-Yu Tsai
• [U-Boot] [PATCH v2 5/8] ARM: sunxi: Add support for R_PIO gpio banks   Chen-Yu Tsai
• [U-Boot] [PATCH v2 6/8] ARM: sunxi: Allow specifying module in prcm apb0 init function   Chen-Yu Tsai
• [U-Boot] [PATCH v2 7/8] ARM: sunxi: Add support for using R_UART as console   Chen-Yu Tsai
• [U-Boot] [PATCH v2 8/8] ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig   Chen-Yu Tsai
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Jeroen Hofstee
• [U-Boot] Mini Summit 2014 Followup / Transcript of Open Discussion   Detlev Zundel
• [U-Boot] [PATCH 0/7] dm-serial: bug fix and refactoring and conversion of Uniphier serial   Masahiro Yamada
• [U-Boot] [PATCH 1/7] dm: serial: fix a bug of console putc   Masahiro Yamada
• [U-Boot] [PATCH 2/7] serial: add static directive to local functions   Masahiro Yamada
• [U-Boot] [PATCH 3/7] dm: serial: consolidate common code   Masahiro Yamada
• [U-Boot] [PATCH 4/7] dm: add entries to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 5/7] dm: serial: use Driver Model for UniPhier serial driver   Masahiro Yamada
• [U-Boot] git bisect failed   Christian Gmeiner
• [U-Boot] [PATCH 6/7] serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 7/7] serial: remove uniphier_serial_initialize() call   Masahiro Yamada
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Ian Campbell
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Hans de Goede
• [U-Boot] [PATCH] ot1200: fix sf detection   Christian Gmeiner
• [U-Boot] [PATCH] ot1200: fix sf detection   Stefano Babic
• [U-Boot] [PATCH] Revert "sunxi: dram: Use divisor P=1 for PLL5"   Ian Campbell
• [U-Boot] [PATCH 12/14] dm: omap: serial: Add driver model support   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Masahiro Yamada
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Masahiro Yamada
• [U-Boot] [PATCH] ot1200: add sata support   Christian Gmeiner
• [U-Boot] [PATCH] ARM: at91 series: convert to generic board   Bo Shen
• [U-Boot] [PATCH] ot1200: fix sf detection   Anatolij Gustschin
• [U-Boot] [PATCH v4 0/20] Add Marvell Armada XP MV78460 SoC support   Stefan Roese
• [U-Boot] [PATCH v4 01/20] arm: kirkwood: Move some SoC files into new arch/arm/mvebu-common   Stefan Roese
• [U-Boot] [PATCH v4 02/20] arm: marvell: Move arch/kirkwood.h to arch/soc.h   Stefan Roese
• [U-Boot] [PATCH v4 03/20] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Stefan Roese
• [U-Boot] [PATCH v4 04/20] arm: marvell: Rework timer.c to make it usable for other MVEBU platforms   Stefan Roese
• [U-Boot] [PATCH v4 05/20] arm: mvebu: Add common mbus functions to use on Marvell SoCs   Stefan Roese
• [U-Boot] [PATCH v4 06/20] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Stefan Roese
• [U-Boot] [PATCH v4 07/20] arm: marvell: Extract kirkwood gpio functions into new common file gpio.c   Stefan Roese
• [U-Boot] [PATCH v4 08/20] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Stefan Roese
• [U-Boot] [PATCH v4 09/20] arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()   Stefan Roese
• [U-Boot] [PATCH v4 10/20] net: mvneta.c: Add support for the ethernet controller of the Marvell Armada XP SoC   Stefan Roese
• [U-Boot] [PATCH v4 11/20] net: phy.h: Make PHY autonegotiation timeout configurable   Stefan Roese
• [U-Boot] [PATCH v4 12/20] i2c: mvtwsi: Add support for Marvell Armada XP   Stefan Roese
• [U-Boot] [PATCH v4 13/20] arm: armada-xp: Add basic support for Marvell Armada XP SoC   Stefan Roese
• [U-Boot] [PATCH v4 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Stefan Roese
• [U-Boot] [PATCH v4 15/20] arm: armada-xp: Add basic support for the maxBCM board   Stefan Roese
• [U-Boot] [PATCH v4 16/20] arm: kirkwood: Remove some dead code from cpu.c   Stefan Roese
• [U-Boot] [PATCH v4 17/20] tools/kwboot: Sync with latest barebox version to support Armada XP   Stefan Roese
• [U-Boot] [PATCH v4 18/20] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported   Stefan Roese
• [U-Boot] [PATCH v4 19/20] tools: kwbimage: Add image version 1 support for Armada XP / 370   Stefan Roese
• [U-Boot] [PATCH v4 20/20] Makefile: Add CONFIG_BUILD_TARGET to automatically build an special image   Stefan Roese
• [U-Boot] [PATCH] arm: ls102xa: clear EPU registers for deep sleep   Chenhui Zhao
• [U-Boot] "make help" talks about "starred" targets when nothing is starred   Masahiro Yamada
• [U-Boot] [PATCH v2] generic-board: make compile-time noise for non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH] nand: reinstate lazy bad block scanning   Rostislav Lisovy
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Fabio Estevam
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH v3 6/6] sunxi: Kconfig: Unify sunxi Kconfig code   Hans de Goede
• [U-Boot] Relocation issue - need help!   Wolfgang Denk
• [U-Boot] [U-boot] [Patch] ARM: cmd_clock: generalize command usage description   Ivan Khoronzhuk
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Jeroen Hofstee
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Jeroen Hofstee
• [U-Boot] [PATCH] ot1200: fix sf detection   Nikita Kiryanov
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] Relocation issue - need help!   Dirk Eibach
• [U-Boot] [U-boot] [Patch v6 0/6] keystone2: add k2l SoC and k2l_evm board support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 1/6] ARM: keystone2: add K2L device hardware definitions   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 4/6] ARM: keystone2: spl: move board specific code   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 5/6] keystone2: enable OSR clock domain for K2L SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v6 6/6] keystone2: k2l-evm: add board support   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/3] sunxi: Add clock_get_pll5p() function   Hans de Goede
• [U-Boot] [PATCH 2/3] sunxi: dram: Use clock_get_pll5p to calculate mbus, rather then hardcoding   Hans de Goede
• [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_OLD_KERNEL_COMPAT Kconfig option   Hans de Goede
• [U-Boot] [PATCH v2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [U-boot] [Patch v4 2/6] keystone2: clock: add K2L clock definitions and commands   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Tom Rini
• [U-Boot] [PATCH] image-fdt: boot_get_fdt() return value when no DTB exists   Noam Camus
• [U-Boot] [U-boot] [Patch v4 0/4] keystone2: serdes: add seredes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 1/4] soc: keystone_serdes: create a separate SGMII SerDes driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 2/4] soc: keystone_serdes: enhance to use cmu/comlane/lane specific configurations   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 3/4] soc: keystone_serdes: generalize to be used by other sub systems   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v4 4/4] soc: keystone_serdes: generalize configuration mechanism   Ivan Khoronzhuk
• [U-Boot] [PATCH 1/2] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [U-boot] [Patch v3 0/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 1/4] dma: ti-edma3: introduce edma3 driver   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 2/4] ARM: keystone: msmc: extend functionality of SES   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 3/4] keystone2: ecc: add ddr3 error detection and correction support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v3 4/4] ARM: keystone: cmd_ddr3: add ddr3 commands to test ddr   Ivan Khoronzhuk
• [U-Boot] [PATCH v3 3/6] x86: Allow cmdline setup in setup_zimage() to be optional   Simon Glass
• [U-Boot] [PATCH v3 1/6] x86: Enable LMB and RAMDISK_HIGH by default   Simon Glass
• [U-Boot] [PATCH v3 2/6] x86: Rewrite bootm.c to make it similar to ARM   Simon Glass
• [U-Boot] [PATCH v3 4/6] sandbox: bootm: Don't fail the architecture check   Simon Glass
• [U-Boot] [PATCH v3 5/6] doc: Tidy up and update part of the FIT documentation   Simon Glass
• [U-Boot] [PATCH v3 6/6] x86: Support loading kernel setup from a FIT   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   York Sun
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Tom Rini
• [U-Boot] [PATCH 01/19] lib: errno: introduce errno_str(): returns errno related message   Tom Rini
• [U-Boot] [PATCH 07/19] dm: pmic: add max77686 pmic driver   Tom Rini
• [U-Boot] [PATCH 08/19] dm: regulator: add max77686 regulator driver   Tom Rini
• [U-Boot] [PATCH 09/19] dm: pmic: new commands: pmic and regulator   Tom Rini
• [U-Boot] [PATCH 01/14] dm: gpio: Support numbered GPIOs   Tom Rini
• [U-Boot] [PATCH 02/14] dm: serial: Reset the watchdog while waiting in getc()   Tom Rini
• [U-Boot] [PATCH 03/14] dm: serial: ns16550: Correct logic for checking for character   Tom Rini
• [U-Boot] [PATCH 04/14] dm: ns16550: Use an address instead of a pointer for the uart base   Tom Rini
• [U-Boot] [PATCH 05/14] dm: ns16550: Correct the probe logic for platform data   Tom Rini
• [U-Boot] [PATCH 06/14] dm: serial: Support CONFIG_CONS_INDEX if available   Tom Rini
• [U-Boot] [PATCH 07/14] dm: dts: omap: Select correct console for beaglebone   Tom Rini
• [U-Boot] [PATCH 08/14] dm: omap: gpio: Put _get_gpio_value() logic into its own function   Tom Rini
• [U-Boot] [PATCH 09/14] dm: omap: gpio: Support driver model   Tom Rini
• [U-Boot] [PATCH 10/14] dm: am33xx: Provide platform data for GPIOs   Tom Rini
• [U-Boot] [PATCH 11/14] dm: am33xx: Provide platform data for serial   Tom Rini
• [U-Boot] [PATCH 12/14] dm: omap: serial: Add driver model support   Tom Rini
• [U-Boot] [PATCH 13/14] dm: am335x: Remove serial options from CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] [PATCH 14/14] dm: am33xx: Move to driver model for GPIO and serial   Tom Rini
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] [PATCH 14/14] dm: am33xx: Move to driver model for GPIO and serial   Simon Glass
• [U-Boot] [PATCH v2 1/2] x86: Fix rom version build with CONFIG_X86_RESET_VECTOR   Simon Glass
• [U-Boot] [PATCH v2 2/2] x86: Fix GDT limit in start16.S   Simon Glass
• [U-Boot] [PATCH 14/14] dm: am33xx: Move to driver model for GPIO and serial   Tom Rini
• [U-Boot] Please pull u-boot-x88   Simon Glass
• [U-Boot] [PATCH] image-fdt: boot_get_fdt() return value when no DTB exists   Tom Rini
• [U-Boot] Please pull u-boot-x88   Tom Rini
• [U-Boot] [PATCH] imximage: Fix the bootdata.size calculation   Fabio Estevam
• [U-Boot] Relocation issue - need help!   Wolfgang Denk
• [U-Boot] Please pull u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH] image-fdt: boot_get_fdt() return value when no DTB exists   Alexey Brodkin
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Tom Rini
• [U-Boot] Relocation issue - need help!   Fabio Estevam
• [U-Boot] Relocation issue - need help!   Tom Rini
• [U-Boot] [PATCH v2] image: Fix Android boot image support   Simon Glass
• [U-Boot] [PATCH] image-fdt: boot_get_fdt() return value when no DTB exists   Tom Rini
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Wolfgang Denk
• [U-Boot] Relocation issue - need help!   Wolfgang Denk
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] Please pull u-boot-tegra/master into ARM/master   Marcel Ziswiler
• [U-Boot] [PATCH v2 5/8] ARM: sunxi: Add support for R_PIO gpio banks   Ian Campbell
• [U-Boot] [PATCH] arm: socfpga: Zap spl.h and ad-hoc related syms   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Move code from misc_init_r() to arch_early_init_r()   Marek Vasut
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Wolfgang Denk
• [U-Boot] [RFC] MW rule and its period   Otavio Salvador
• [U-Boot] [PATCH] net: asix: Add support for AX88772B   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Zap CONFIG_EPHY[01]_PHY_ADDR macro   Marek Vasut
• [U-Boot] [PATCH 1/3] sunxi: Add clock_get_pll5p() function   Ian Campbell
• [U-Boot] [PATCH 2/3] sunxi: dram: Use clock_get_pll5p to calculate mbus, rather then hardcoding   Ian Campbell
• [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_OLD_KERNEL_COMPAT Kconfig option   Ian Campbell
• [U-Boot] [PATCH v2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Ian Campbell
• [U-Boot] [PATCH] usb/xhci: remove XHCI init code from other usb controllers   Marek Vasut
• [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_OLD_KERNEL_COMPAT Kconfig option   Tom Rini
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Ian Campbell
• [U-Boot] [PATCH] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Marek Vasut
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Ian Campbell
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: Zap CONFIG_EPHY[01]_PHY_ADDR macro   Dinh Nguyen
• [U-Boot] [PATCH] arm: socfpga: Zap CONFIG_EPHY[01]_PHY_ADDR macro   Marek Vasut
• [U-Boot] "make help" talks about "starred" targets when nothing is starred   Robert P. J. Day
• [U-Boot] [PATCH] usb/xhci: remove XHCI init code from other usb controllers   York Sun
• [U-Boot] [PATCH 0/9] Pre-EEPROM cleanup series   Marek Vasut
• [U-Boot] [PATCH 1/9] doc: Update README.scrapyard   Marek Vasut
• [U-Boot] [PATCH 2/9] ppc: Zap ICU862 board   Marek Vasut
• [U-Boot] [PATCH 3/9] ppc: Zap MHPC board   Marek Vasut
• [U-Boot] [PATCH 4/9] ppc: Zap Hymod board   Marek Vasut
• [U-Boot] [PATCH 5/9] ppc: Zap HWW1U1A board   Marek Vasut
• [U-Boot] [PATCH 6/9] ppc: Zap IDS8247 board   Marek Vasut
• [U-Boot] [PATCH 7/9] ppc: Zap TQM8260 board   Marek Vasut
• [U-Boot] [PATCH 8/9] ppc: Zap TQM8272 board   Marek Vasut
• [U-Boot] [PATCH 9/9] arm: Zap tricorder-eeprom   Marek Vasut
• [U-Boot] [PATCH] usb/xhci: remove XHCI init code from other usb controllers   Marek Vasut
• [U-Boot] [PATCH V2] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Marek Vasut
• [U-Boot] [PATCH 2/7] spi: altera: Clean up bit definitions   Marek Vasut
• [U-Boot] [PATCH 3/7] spi: altera: Clean up most checkpatch issues   Marek Vasut
• [U-Boot] [PATCH 4/7 v2] spi: altera: Zap endless loop   Marek Vasut
• [U-Boot] [PATCH 5/7 v2] spi: altera: Clean up the use of variable d   Marek Vasut
• [U-Boot] [PATCH 6/7 v2] spi: altera: Add short note about EPCS/EPCQx1   Marek Vasut
• [U-Boot] [PATCH 7/7] spi: altera: Move the config options to the top   Marek Vasut
• [U-Boot] [PATCH V2] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Pavel Machek
• [U-Boot] [PATCH V2] usb: dwc2: Add driver for Synopsis DWC2 USB IP block   Marek Vasut
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] [PATCH v2 2/3] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] Relocation issue - need help!   Pavel Machek
• [U-Boot] [PATCH 1/9] doc: Update README.scrapyard   Wolfgang Denk
• [U-Boot] Relocation issue - need help!   Marek Vasut
• [U-Boot] [PATCH 1/9] doc: Update README.scrapyard   Marek Vasut
• [U-Boot] Relocation issue - need help!   Pavel Machek
• [U-Boot] Relocation issue - need help!   Marek Vasut
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] u-boot, fsl_espi.c driver   York Sun
• [U-Boot] [PATCH 1/7] dm: serial: fix a bug of console putc   Simon Glass
• [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Masahiro Yamada
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Yuantian Tang
• [U-Boot] [PATCH] arm: goni: add i2c_init_board()   Simon Glass
• [U-Boot] [PATCH v10 01/12] dm: exynos: dts: Convert /include/ to #include   Simon Glass
• [U-Boot] [PATCH v10 02/12] dm: exynos: Bring in pinctrl dts files from Linux kernel   Simon Glass
• [U-Boot] [PATCH v10 03/12] dm: exynos: dts: Remove unused pinctrl information to save space   Simon Glass
• [U-Boot] [PATCH v10 04/12] dm: exynos: dts: Adjust device tree files for U-Boot   Simon Glass
• [U-Boot] [PATCH v10 05/12] dm: exynos: Add pinctrl settings for smdkc100   Simon Glass
• [U-Boot] [PATCH v10 06/12] dm: exynos: Add pinctrl settings for s5p_goni   Simon Glass
• [U-Boot] [PATCH v10 07/12] dm: exynos: Move smdkc100 to generic board   Simon Glass
• [U-Boot] [PATCH v10 08/12] dm: exynos: Move s5p_goni to generic board   Simon Glass
• [U-Boot] [PATCH v10 09/12] dm: exynos: Tidy up GPIO headers   Simon Glass
• [U-Boot] [PATCH v10 10/12] dm: exynos: Tidy up GPIO defines   Simon Glass
• [U-Boot] [PATCH v10 11/12] dm: exynos: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v10 12/12] dm: exynos: gpio: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v6 1/2] dm: exynos: Mark exynos5 console as pre-reloc   Simon Glass
• [U-Boot] [PATCH v6 2/2] dm: exynos: Move serial to driver model   Simon Glass
• [U-Boot] [PATCH v4 01/29] sandbox: dts: Add a SPI device and cros_ec device   Simon Glass
• [U-Boot] [PATCH v4 02/29] dm: core: Add functions for iterating through device children   Simon Glass
• [U-Boot] [PATCH v4 03/29] dm: core: Allow parents to pass data to children during probe   Simon Glass
• [U-Boot] [PATCH v4 04/29] dm: core: Add a clarifying comment on struct udevice's seq member   Simon Glass
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v4 06/29] dm: sandbox: Add a SPI emulation uclass   Simon Glass
• [U-Boot] [PATCH v4 07/29] dm: Remove spi_init() from board_r.c when using driver model   Simon Glass
• [U-Boot] [PATCH v4 08/29] dm: Add spi.h header to a few files   Simon Glass
• [U-Boot] [PATCH v4 09/29] dm: spi: Adjust cmd_spi to work with driver model   Simon Glass
• [U-Boot] [PATCH v4 10/29] dm: sandbox: spi: Move to driver model   Simon Glass
• [U-Boot] [PATCH v4 11/29] dm: spi: Rename soft_spi.c to soft_spi_legacy.c   Simon Glass
• [U-Boot] [PATCH v4 12/29] dm: spi: Remove SPI_INIT feature   Simon Glass
• [U-Boot] [PATCH v4 13/29] dm: spi: Add soft_spi implementation   Simon Glass
• [U-Boot] [PATCH v4 14/29] dm: exynos: Convert SPI to driver model   Simon Glass
• [U-Boot] [PATCH v4 15/29] dm: spi: Add documentation on how to convert over SPI drivers   Simon Glass
• [U-Boot] [PATCH v4 16/29] exynos: universal_c210: Move to driver model soft_spi   Simon Glass
• [U-Boot] [PATCH v4 17/29] sf: Tidy up public and private header files   Simon Glass
• [U-Boot] [PATCH v4 18/29] spi: Use error return value in sf_ops   Simon Glass
• [U-Boot] [PATCH v4 19/29] dm: sf: Add a uclass for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 20/29] dm: Convert spi_flash_probe() and 'sf probe' to use driver model   Simon Glass
• [U-Boot] [PATCH v4 21/29] dm: sf: sandbox: Convert SPI flash driver to driver model   Simon Glass
• [U-Boot] [PATCH v4 22/29] dm: exynos: config: Use driver model for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 23/29] dm: spi: Add tests   Simon Glass
• [U-Boot] [PATCH v4 24/29] dm: sf: Add tests for SPI flash   Simon Glass
• [U-Boot] [PATCH v4 25/29] dm: tegra: dts: Add aliases for spi on tegra30 boards   Simon Glass
• [U-Boot] [PATCH v4 26/29] dm: tegra: spi: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v4 27/29] dm: cros_ec: Add support for driver model   Simon Glass
• [U-Boot] [PATCH v4 28/29] dm: sandbox: cros_ec: Move sandbox cros_ec to driver module   Simon Glass
• [U-Boot] [PATCH v4 29/29] dm: exynos: cros_ec: Move cros_ec_spi to driver model   Simon Glass
• [U-Boot] [PATCH v4 1/9] dm: linker_lists: Add a way to declare multiple objects   Simon Glass
• [U-Boot] [PATCH v4 2/9] dm: core: Allow a list of devices to be declared in one step   Simon Glass
• [U-Boot] [PATCH v4 3/9] initcall: Display error number when an error occurs   Simon Glass
• [U-Boot] [PATCH v4 4/9] dm: serial: Put common code into separate functions   Simon Glass
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   York Sun
• [U-Boot] [PATCH v4 5/9] imx: Add error checking to setup_i2c()   Simon Glass
• [U-Boot] [PATCH v4 7/9] dm: imx: gpio: Support driver model in MXC gpio driver   Simon Glass
• [U-Boot] [PATCH v4 8/9] dm: imx: serial: Support driver model in the MXC serial driver   Simon Glass
• [U-Boot] [PATCH v4 9/9] dm: imx: Move cm_fx6 to use driver model for serial and GPIO   Simon Glass
• [U-Boot] [PATCH 1/2] dm: imx: i2c: Use gpio_request() to request GPIOs   Simon Glass
• [U-Boot] [PATCH 2/2] arm: mx6: cm_fx6: use gpio request   Simon Glass
• [U-Boot] [PATCH 03/23] dm: core: Add support for simple-bus   Simon Glass
• [U-Boot] [PATCH 1/4] dm: rpi: Convert GPIO driver to driver model   Simon Glass
• [U-Boot] [PATCH 2/4] dm: serial: Tidy up the pl01x driver   Simon Glass
• [U-Boot] [PATCH 3/4] dm: serial: Support driver model in pl01x driver   Simon Glass
• [U-Boot] Please pull u-boot-fdt.git   Simon Glass
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [PATCH v10 14/14] RFC: Deprecate MAKEALL   Simon Glass
• [U-Boot] [PATCH v2] generic-board: make compile-time noise for non-generic boards   Simon Glass
• [U-Boot] [PATCH 07/14] dm: dts: omap: Select correct console for beaglebone   Simon Glass
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH 0/7] dm-serial: bug fix and refactoring and conversion of Uniphier serial   Simon Glass
• [U-Boot] [PATCH 2/7] serial: add static directive to local functions   Simon Glass
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Yuantian Tang
• [U-Boot] [PATCH 3/7] dm: serial: consolidate common code   Simon Glass
• [U-Boot] [PATCH 4/7] dm: add entries to Kconfig   Simon Glass
• [U-Boot] [PATCH 5/7] dm: serial: use Driver Model for UniPhier serial driver   Simon Glass
• [U-Boot] [PATCH 6/7] serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig   Simon Glass
• [U-Boot] [PATCH 7/7] serial: remove uniphier_serial_initialize() call   Simon Glass
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   York Sun
• [U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h   Simon Glass
• [U-Boot] [PATCH v2 2/2] exynos5: Use config_distro_bootcmd.h   Simon Glass
• [U-Boot] [PATCH v2 0/15] dm: omap: Provide access to driver model for am335x, and move boards   Simon Glass
• [U-Boot] [PATCH v2 01/15] dm: gpio: Support numbered GPIOs   Simon Glass
• [U-Boot] [PATCH v2 02/15] dm: serial: Reset the watchdog while waiting in getc()   Simon Glass
• [U-Boot] [PATCH v2 03/15] dm: serial: ns16550: Correct logic for checking for character   Simon Glass
• [U-Boot] [PATCH v2 04/15] dm: ns16550: Use an address instead of a pointer for the uart base   Simon Glass
• [U-Boot] [PATCH v2 05/15] dm: ns16550: Correct the probe logic for platform data   Simon Glass
• [U-Boot] [PATCH v2 06/15] dm: serial: Support CONFIG_CONS_INDEX if available   Simon Glass
• [U-Boot] [PATCH v2 07/15] dm: dts: omap: Select correct console for beaglebone   Simon Glass
• [U-Boot] [PATCH v2 08/15] dm: omap: gpio: Put _get_gpio_value() logic into its own function   Simon Glass
• [U-Boot] [PATCH v2 09/15] dm: omap: gpio: Support driver model   Simon Glass
• [U-Boot] [PATCH v2 10/15] dm: am33xx: Provide platform data for GPIOs   Simon Glass
• [U-Boot] [PATCH v2 11/15] dm: am33xx: Provide platform data for serial   Simon Glass
• [U-Boot] [PATCH v2 12/15] dm: omap: serial: Add driver model support   Simon Glass
• [U-Boot] [PATCH v2 13/15] dm: am335x: Remove serial options from CONFIG_SYS_EXTRA_OPTIONS   Simon Glass
• [U-Boot] [PATCH v2 14/15] dm: am33xx: Move to driver model for GPIO and serial   Simon Glass
• [U-Boot] [PATCH v2 15/15] dm: omap3: Move to driver model for GPIO and serial   Simon Glass
• [U-Boot] [PATCH v2 0/15] dm: omap: Provide access to driver model for am335x, and move boards   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v2 0/6] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH v2 1/6] dm: sunxi: dts: Add sun7i device tree files   Simon Glass
• [U-Boot] [PATCH v2 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [PATCH v2 3/6] dm: sunxi: Add pinmux functions which take a bank parameter   Simon Glass
• [U-Boot] [PATCH v2 4/6] dm: sunxi: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v2 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Simon Glass
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH v3 0/29] Introduce driver model support for SPI, SPI flash, cros_ec   Simon Glass
• [U-Boot] [PATCH 0/7] dm: Introduce driver model for Atmel at91   Simon Glass
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   York Sun
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Yuantian Tang
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Andreas Bießmann
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Andreas Bießmann
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Simon Glass
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Andreas Bießmann
• [U-Boot] Relocation issue - need help!   Dirk Eibach
• [U-Boot] [PATCH v2] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] Relocation issue - need help!   Joakim Tjernlund
• [U-Boot] [PATCH 3/7] dm: at91: Add driver model support for atmel GPIO driver   Andreas Bießmann
• [U-Boot] [PATCH 4/7] dm: at91: Add platform data for GPIO on at91sam9260-based boards   Andreas Bießmann
• [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Michael Thalmeier
• [U-Boot] [PATCH] mtd: nand: allow to skip BBT scanning during NAND inititialization   Masahiro Yamada
• [U-Boot] [PATCH] arm: socfpga: Add I2C support to SoCFPGA   Stefan Roese
• [U-Boot] [PATCH] ot1200: fix sf detection   Stefano Babic
• [U-Boot] [PATCH] ot1200: add sata support   Stefano Babic
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Thierry Reding
• [U-Boot] [PATCH] e1000: fix sw fw sync on igb i210/i211   Tim Harvey
• [U-Boot] [PATCH v2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH] common: command: trivial coding style fixes   Masahiro Yamada
• [U-Boot] [PATCH 6/7] serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2] sunxi: Add CONFIG_OLD_SUNXI_KERNEL_COMPAT Kconfig option   Hans de Goede
• [U-Boot] [PATCH] cmd_mem: call unmap_sysmem() after map_sysmem()   Masahiro Yamada
• [U-Boot] [PATCH] arm: socfpga: Add I2C support to SoCFPGA   Marek Vasut
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH 1/4] net/fm: add 2.5G SGMII support   Shengzhou Liu
• [U-Boot] [PATCH] dm: move platform data headers to include/dm/platform_data   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Ian Campbell
• [U-Boot] [PATCH v2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH v3] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH 1/4] net/fm: add 2.5G SGMII support   Shengzhou.Liu at freescale.com
• [U-Boot] Clarification about u-boot-2013.04   J.P.Raja
• [U-Boot] [PATCH] i2c: designware: Convert driver to multibus/multiadapter framework   Stefan Roese
• [U-Boot] [PATCH] musb: fix warning in include/linux/usb/musb.h   Igor Grinberg
• [U-Boot] [PATCH 1/3] ot1200: add feature pads   Christian Gmeiner
• [U-Boot] [PATCH 2/3] ot1200: add support for usdhc4   Christian Gmeiner
• [U-Boot] [PATCH 3/3] ot1200: rework card detect for eMMC   Christian Gmeiner
• [U-Boot] [PATCH 0/7] dm-serial: bug fix and refactoring and conversion of Uniphier serial   Masahiro Yamada
• [U-Boot] [PATCH v2] mtd: nand: allow to skip BBT scanning during NAND inititialization   Masahiro Yamada
• [U-Boot] Collapsing buildman output dir?   Tom Rini
• [U-Boot] [PATCH] sun7i: Set CONFIG_ARMV7_SEC_BY_DEFAULT when CONFIG_OLD_KERNEL_COMPAT is set   Tom Rini
• [U-Boot] Relocation issue - need help!   Wolfgang Denk
• [U-Boot] [PATCH v2] sunxi: Add CONFIG_OLD_SUNXI_KERNEL_COMPAT Kconfig option   Tom Rini
• [U-Boot] [PATCH v2 0/8] dm-serial: bug fix and refactoring and conversion of Uniphier serial   Masahiro Yamada
• [U-Boot] [PATCH v2 1/8] serial: add static directive to local functions   Masahiro Yamada
• [U-Boot] [PATCH v2 2/8] dm: serial: fix console putc   Masahiro Yamada
• [U-Boot] [PATCH v2 3/8] dm: serial: remove unnecessary casting   Masahiro Yamada
• [U-Boot] [PATCH v2 4/8] dm: serial: consolidate common code more   Masahiro Yamada
• [U-Boot] [PATCH v2 5/8] dm: add entries to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 6/8] dm: serial: use Driver Model for UniPhier serial driver   Masahiro Yamada
• [U-Boot] [PATCH v2 7/8] serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 8/8] serial: remove uniphier_serial_initialize() call   Masahiro Yamada
• [U-Boot] [PATCH 1/7] dm: serial: fix a bug of console putc   Masahiro Yamada
• [U-Boot] [PATCH 0/5] spi: sf: ICH SPI driver fix and SST25* changes   Bin Meng
• [U-Boot] [PATCH 1/5] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Bin Meng
• [U-Boot] [PATCH 2/5] spi/ich.c: Set the rx operation mode for ich 7   Bin Meng
• [U-Boot] [PATCH 3/5] spi: sf: Support byte program for sst spi flash   Bin Meng
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Bin Meng
• [U-Boot] [PATCH 5/5] sf: Update SST25* flash params of sector size & numbers   Bin Meng
• [U-Boot] Relocation issue - need help!   Dirk Eibach
• [U-Boot] [ANN] U-Boot v2014.10 released   Wolfgang Denk
• [U-Boot] Conditional boot   Marco Pavanelli
• [U-Boot] [ 0/2] tqma6: trivial fixes   Markus Niebel
• [U-Boot] [ 1/2] tqma6: fix sf detection   Markus Niebel
• [U-Boot] [ 2/2] tqma6: fix typo in header guard define   Markus Niebel
• [U-Boot] ARM SoC trees   Tom Rini
• [U-Boot] Please pull u-boot-fdt.git   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH v2 0/2] SPI: mxc_spi: slave initialisation fixes   Markus Niebel
• [U-Boot] [PATCH v2 1/2] SPI: mxc_spi: remove second reset from ECSPI config handler   Markus Niebel
• [U-Boot] [PATCH v2 2/2] SPI: mxc_spi: delay initialisation until claim bus   Markus Niebel
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Matthias Fuchs
• [U-Boot] [PATCH 1/7] spi: altera: Use struct-based register access   Pavel Machek
• [U-Boot] [PATCH] openrd: Undefine CONFIG_CMD_NFS   Tom Rini
• [U-Boot] Please increase the image size for km boards   Valentin Longchamp
• [U-Boot] [PATCH] arm: db-mv784mp-gp/maxbcm Add placeholder bin_hdr file so that linking works   Stefan Roese
• [U-Boot] [U-Boot, v4, 01/20] arm: kirkwood: Move some SoC files into new arch/arm/mvebu-common   Tom Rini
• [U-Boot] [U-Boot, v4, 02/20] arm: marvell: Move arch/kirkwood.h to arch/soc.h   Tom Rini
• [U-Boot] [U-Boot, v4, 03/20] arm: marvell: Move arch-kirkwood/spi.h to arch-mvebu/spi.h   Tom Rini
• [U-Boot] [U-Boot, v4, 04/20] arm: marvell: Rework timer.c to make it usable for other MVEBU platforms   Tom Rini
• [U-Boot] [U-Boot, v4, 05/20] arm: mvebu: Add common mbus functions to use on Marvell SoCs   Tom Rini
• [U-Boot] [U-Boot, v4, 06/20] spi: kirkwood_spi.c: Compile MPP (pin-mux) only for kirkwood SoC's   Tom Rini
• [U-Boot] [U-Boot, v4, 07/20] arm: marvell: Extract kirkwood gpio functions into new common file gpio.c   Tom Rini
• [U-Boot] [U-Boot, v4, 08/20] spi: kirkwood_spi.c: Change KW_SPI_BASE to MVEBU_SPI_BASE   Tom Rini
• [U-Boot] [U-Boot, v4, 09/20] arm: kirkwood: Change naming of dram functions from km_foo() to mvebu_foo()   Tom Rini
• [U-Boot] [U-Boot, v4, 10/20] net: mvneta.c: Add support for the ethernet controller of the Marvell Armada XP SoC   Tom Rini
• [U-Boot] [U-Boot, v4, 11/20] net: phy.h: Make PHY autonegotiation timeout configurable   Tom Rini
• [U-Boot] [U-Boot, v4, 12/20] i2c: mvtwsi: Add support for Marvell Armada XP   Tom Rini
• [U-Boot] [U-Boot, v4, 13/20] arm: armada-xp: Add basic support for Marvell Armada XP SoC   Tom Rini
• [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Tom Rini
• [U-Boot] [U-Boot, v4, 15/20] arm: armada-xp: Add basic support for the maxBCM board   Tom Rini
• [U-Boot] [U-Boot, v4, 16/20] arm: kirkwood: Remove some dead code from cpu.c   Tom Rini
• [U-Boot] [U-Boot, v4, 17/20] tools/kwboot: Sync with latest barebox version to support Armada XP   Tom Rini
• [U-Boot] [U-Boot, v4, 18/20] tools: Compile kwboot for Marvell Armada XP as those SoCs are now supported   Tom Rini
• [U-Boot] [U-Boot, v4, 19/20] tools: kwbimage: Add image version 1 support for Armada XP / 370   Tom Rini
• [U-Boot] [U-Boot, v4, 20/20] Makefile: Add CONFIG_BUILD_TARGET to automatically build an special image   Tom Rini
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Tom Rini
• [U-Boot] Please increase the image size for km boards   York Sun
• [U-Boot] [PATCH] Revert "common, env: Fix support for environment in i2c eeprom"   Matthias Fuchs
• [U-Boot] [Question of dm serial] Is pending handler optional?   Masahiro YAMADA
• [U-Boot] [PATCH] i2c: designware: Convert driver to multibus/multiadapter framework   Marek Vasut
• [U-Boot] [PATCH] ppc4xx: update PMC440 board support   Matthias Fuchs
• [U-Boot] [PATCH] ppc4xx: update PMC440 board support   Anatolij Gustschin
• [U-Boot] [PATCH v2 0/7] kconfig: Move CONFIG_SYS_HZ and CONFIG_USE_PRIVATE_LIBGCC, bug fixes   Masahiro Yamada
• [U-Boot] [PATCH v2 1/7] kconfig: move CONFIG_SYS_HZ to lib/Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 2/7] x86: set CONFIG_USE_PRIVATE_LIBGCC to y   Masahiro Yamada
• [U-Boot] [PATCH v2 3/7] kbuild: drop CONFIG_USE_PRIVATE_LIBGCC=path/to/libgcc syntax   Masahiro Yamada
• [U-Boot] [PATCH v2 4/7] kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 5/7] kbuild: fix a bug of the u-boot-spl link rule   Masahiro Yamada
• [U-Boot] [PATCH v2 6/7] kconfig: invoke silentoldconfig if spl, tpl/.config is updated   Masahiro Yamada
• [U-Boot] [PATCH v2 7/7] mips: enable CONFIG_USE_PRIVATE_LIBGCC by default   Masahiro Yamada
• [U-Boot] [PATCH v2 0/7] kconfig: Move CONFIG_SYS_HZ and CONFIG_USE_PRIVATE_LIBGCC, bug fixes   Masahiro YAMADA
• [U-Boot] [U-Boot, U-boot, v2, 1/4] keystone2: keystone_nav: don't use hard addresses in qm_config   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/4] keystone2: keystone_nav: don't use hard addresses in netcp_pktdma   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/4] dma: keystone_nav: move keystone_nav driver to driver/dma/   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 4/4] dma: keystone_nav: generalize driver usage   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2] keystone: usb: add support of usb xhci   Tom Rini
• [U-Boot] [U-Boot,U-boot] configs: ks2_evm: enable misc_init_r   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 1/5] net: keystone_net: remove SoC specific emac_regs structure   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/5] net: keystone_net: add support for NETCP v1.5   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/5] net: keystone_net: move header file from arch to ti-common   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 4/5] net: keystone_net: increase MDIO clock frequency   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 5/5] net: keystone_net: remove redundant code from keystone_net.c   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 1/5] net: phy: print a number of phy that is not found   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/5] net: keystone_net: use mdio_reset function   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/5] net: keystone_net: register MDIO bus   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 4/5] net: keystone_net: register eth PHYs on MDIO bus   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 5/5] net: keystone_net: use general get link function   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 1/6] ARM: keystone2: keysonte_nav: add support for K2E SoC   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 2/6] net: keystone_serdes: add keystone K2E SoC support   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 3/6] net: keystone_net: add Keystone2 K2E SoC support   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 4/6] net: keystone_net: increase PHY auto negotiate time   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 5/6] ARM: keystone: clock: add support for K2E SoCs   Tom Rini
• [U-Boot] [U-Boot, U-boot, v2, 6/6] board: k2e_evm: add network support   Tom Rini
• [U-Boot] [U-Boot, U-boot] ARM: cmd_clock: generalize command usage description   Tom Rini
• [U-Boot] [U-Boot, U-boot, v6, 1/6] ARM: keystone2: add K2L device hardware definitions   Tom Rini
• [U-Boot] [U-Boot, U-boot, v6, 2/6] keystone2: clock: add K2L clock definitions and commands   Tom Rini
• [U-Boot] [U-Boot, U-boot, v6, 3/6] keystone2: msmc: add MSMC cache coherency support for K2L SOC   Tom Rini
• [U-Boot] [U-Boot, U-boot, v6, 4/6] ARM: keystone2: spl: move board specific code   Tom Rini
• [U-Boot] [U-Boot, U-boot, v6, 5/6] keystone2: enable OSR clock domain for K2L SoC   Tom Rini
• [U-Boot] [U-Boot, U-boot, v4, 1/4] soc: keystone_serdes: create a separate SGMII SerDes driver   Tom Rini
• [U-Boot] [U-Boot, U-boot, v4, 2/4] soc: keystone_serdes: enhance to use cmu/comlane/lane specific configurations   Tom Rini
• [U-Boot] [U-Boot, U-boot, v4, 3/4] soc: keystone_serdes: generalize to be used by other sub systems   Tom Rini
• [U-Boot] [U-Boot, U-boot, v4, 4/4] soc: keystone_serdes: generalize configuration mechanism   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 1/4] dma: ti-edma3: introduce edma3 driver   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 2/4] ARM: keystone: msmc: extend functionality of SES   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 3/4] keystone2: ecc: add ddr3 error detection and correction support   Tom Rini
• [U-Boot] [U-Boot, U-boot, v3, 4/4] ARM: keystone: cmd_ddr3: add ddr3 commands to test ddr   Tom Rini
• [U-Boot] [U-Boot, 2/5] omap3: overo: Call bootm only after successful nand read   Tom Rini
• [U-Boot] [U-Boot, 3/5] omap3: overo: Move ethernet setup to board_eth_init function   Tom Rini
• [U-Boot] [U-Boot, 4/5] omap3: overo: Separate module and expansion board MUX configuration   Tom Rini
• [U-Boot] [U-Boot,5/5] omap3: overo: Add usb host support   Tom Rini
• [U-Boot] [U-Boot, 1/2] common: Makefile: allow for spl builds with env_fat   Tom Rini
• [U-Boot] [U-Boot, 2/2] arm: am43xx: switch over to CONFIG_ENV_IS_IN_FAT   Tom Rini
• [U-Boot] am335x_boneblack: Only modify NAND/NOR/MMC1 pinmux on BBB in boneblack builds.   Tom Rini
• [U-Boot] am335x_evm: Correct "raw" portions of DFU alt into   Tom Rini
• [U-Boot] [U-Boot, 1/3] omap3: Kconfig: fix the cm-t35 board option prompt   Tom Rini
• [U-Boot] [U-Boot, 2/3] omap3: cm-t35: use define for mmc wp gpio   Tom Rini
• [U-Boot] [U-Boot, 3/3] omap3: cm-t35: remove enable_gpmc_cs_config()   Tom Rini
• [U-Boot] omap3/am33xx: mux: fix several checkpatch issues   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] i2c: designware: Convert driver to multibus/multiadapter framework   Alexey Brodkin
• [U-Boot] [PATCH v3] image: Fix Android boot image support   Ahmad Draidi
• [U-Boot] [U-Boot, U-boot, v6, 6/6] keystone2: k2l-evm: add board support   Tom Rini
• [U-Boot] [PATCH v2 1/7] kconfig: move CONFIG_SYS_HZ to lib/Kconfig   Tom Rini
• [U-Boot] [PATCH v2 2/7] x86: set CONFIG_USE_PRIVATE_LIBGCC to y   Tom Rini
• [U-Boot] [PATCH v2 3/7] kbuild: drop CONFIG_USE_PRIVATE_LIBGCC=path/to/libgcc syntax   Tom Rini
• [U-Boot] [PATCH v2 4/7] kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig   Tom Rini
• [U-Boot] [PATCH v2 5/7] kbuild: fix a bug of the u-boot-spl link rule   Tom Rini
• [U-Boot] [PATCH v2 6/7] kconfig: invoke silentoldconfig if spl, tpl/.config is updated   Tom Rini
• [U-Boot] [PATCH v2 7/7] mips: enable CONFIG_USE_PRIVATE_LIBGCC by default   Tom Rini
• [U-Boot] [PATCH v2] image: Fix Android boot image support   Simon Glass
• [U-Boot] [PATCH v3] image: Fix Android boot image support   Simon Glass
• [U-Boot] Collapsing buildman output dir?   Simon Glass
• [U-Boot] [PATCH] common: command: trivial coding style fixes   Simon Glass
• [U-Boot] [PATCH] cmd_mem: call unmap_sysmem() after map_sysmem()   Simon Glass
• [U-Boot] [PATCH] dm: move platform data headers to include/dm/platform_data   Simon Glass
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [Question of dm serial] Is pending handler optional?   Simon Glass
• [U-Boot] [PATCH v2 2/8] dm: serial: fix console putc   Simon Glass
• [U-Boot] [PATCH v2 3/8] dm: serial: remove unnecessary casting   Simon Glass
• [U-Boot] [PATCH v2 4/8] dm: serial: consolidate common code more   Simon Glass
• [U-Boot] [PATCH] dm: move platform data headers to include/dm/platform_data   Masahiro YAMADA
• [U-Boot] [PATCH 1/4] Add deep sleep framework support for Freescale QorIQ platforms   Tom Rini
• [U-Boot] [PATCH] dm: move platform data headers to include/dm/platform_data   Simon Glass
• [U-Boot] [PATCH v2 3/8] dm: serial: remove unnecessary casting   Simon Glass
• [U-Boot] [Question of dm serial] Is pending handler optional?   Masahiro YAMADA
• [U-Boot] [Question of dm serial] Is pending handler optional?   Simon Glass
• [U-Boot] [PATCH v2 0/16] dm: Implement driver model support in SPL   Simon Glass
• [U-Boot] [PATCH v2 0/13] dm: Implement driver model support in SPL   Simon Glass
• [U-Boot] [PATCH v2 01/13] dm: dts: Move omap device tree includes to correct place   Simon Glass
• [U-Boot] [PATCH v2 02/13] dm: Split the simple malloc() implementation into its own file   Simon Glass
• [U-Boot] [PATCH v2 03/13] dm: arm: spl: Allow simple malloc() in SPL   Simon Glass
• [U-Boot] [PATCH v2 04/13] dm: spl: Make simple malloc() available when enabled   Simon Glass
• [U-Boot] [PATCH v2 05/13] dm: spl: Allow driver model to be used   Simon Glass
• [U-Boot] [PATCH v2 06/13] dm: Allow device removal features to be dropped   Simon Glass
• [U-Boot] [PATCH v2 07/13] dm: Allow stdio registration to be dropped   Simon Glass
• [U-Boot] [PATCH v2 08/13] dm: Disable dm_warn() in SPL   Simon Glass
• [U-Boot] [PATCH v2 09/13] dm: tegra: Add platform data for the SPL uart   Simon Glass
• [U-Boot] [PATCH v2 10/13] dm: tegra: Add platform data for the GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 11/13] dm: arm: spl: Make driver model linker lists available   Simon Glass
• [U-Boot] [PATCH v2 12/13] dm: tegra: Enable driver model in SPL and adjust the GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 13/13] dm: Update documentation to include CONFIG_DM... options   Simon Glass
• [U-Boot] [PATCH v2 0/16] dm: Implement driver model support in SPL   Simon Glass
• [U-Boot] [PATCH 0/14] dm: omap: Provide access to driver model for am335x, and move boards   Simon Glass
• [U-Boot] [PATCH v2 3/8] dm: serial: remove unnecessary casting   Masahiro YAMADA
• [U-Boot] [PATCH 0/23] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH 5/7] dm: at91: Refactor serial driver slightly for driver model   Andreas Bießmann
• [U-Boot] [PATCH] musb: fix warning in include/linux/usb/musb.h   Marek Vasut
• [U-Boot] [PATCH 6/7] dm: at91: Add driver model support for the serial driver   Andreas Bießmann
• [U-Boot] [PATCH 7/7] dm: at91: Convert snapper9260 to use driver model   Andreas Bießmann
• [U-Boot] [PATCH 0/7] dm: Introduce driver model for Atmel at91   Andreas Bießmann
• [U-Boot] [PATCH 1/7] dm: at91: Correct text base for snapper9260   Simon Glass
• [U-Boot] [PATCH v2 13/13] dm: Update documentation to include CONFIG_DM... options   Masahiro YAMADA
• [U-Boot] Please pull u-boot-tegra/master into ARM/master   Tom Rini
• [U-Boot] [PATCH] kbuild: clear VENDOR variable to fix build error on tcsh   Tom Rini
• [U-Boot] [PATCH] board: wandboard: add usb storage   Jeroen Hofstee
• [U-Boot] [PATCH 07/14] dm: dts: omap: Select correct console for beaglebone   Tom Rini
• [U-Boot] [PATCH] board: wandboard: add usb storage   Jeroen Hofstee
• [U-Boot] [PATCH v2 15/15] dm: omap3: Move to driver model for GPIO and serial   Tom Rini
• [U-Boot] [PATCH] board: wandboard: add usb storage   Fabio Estevam
• [U-Boot] [PATCH] board: wandboard: add usb storage   Jeroen Hofstee
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Jeroen Hofstee
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Fabio Estevam
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Jeroen Hofstee
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Fabio Estevam
• [U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH v2 02/11] fdt: Report failure of ft_board_setup()   Simon Glass
• [U-Boot] [PATCH v2 03/11] fdt: Export the fdt_find_or_add_subnode() function   Simon Glass
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH v2 05/11] fdt: Use the correct return types for fdtdec_decode_region()   Simon Glass
• [U-Boot] [PATCH v2 06/11] fdt: Enhance flashmap function to deal with region properties   Simon Glass
• [U-Boot] [PATCH v2 07/11] fdt: Tidy up error handling in image_setup_libfdt()   Simon Glass
• [U-Boot] [PATCH v2 08/11] fdt: Add ft_system_setup() function for system device tree additions   Simon Glass
• [U-Boot] [PATCH v2 09/11] fdt: Change fdt_pack_reg() to static and fix types   Simon Glass
• [U-Boot] [PATCH v2 10/11] fdt: Add a function to decode a named memory region   Simon Glass
• [U-Boot] [PATCH v2 11/11] fdt: Try to use fdt_address_cells()/fdt_size_cells()   Simon Glass
• [U-Boot] [PATCH 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()   Simon Glass
• [U-Boot] [PATCH v2 13/13] dm: Update documentation to include CONFIG_DM... options   Simon Glass
• [U-Boot] [PATCH 07/14] dm: dts: omap: Select correct console for beaglebone   Simon Glass
• [U-Boot] [PATCH 01/10] x86: config: Enable dhcp on link   Simon Glass
• [U-Boot] [PATCH 02/10] x86: Add device tree information for Chrome OS EC   Simon Glass
• [U-Boot] [PATCH 03/10] x86: dts: Add device tree compatible string for Intel IPC   Simon Glass
• [U-Boot] [PATCH 04/10] x86: cros_ec: Update LPC driver for new cros_ec header   Simon Glass
• [U-Boot] [PATCH 05/10] x86: cros_ec: Enable cros_ec for link   Simon Glass
• [U-Boot] [PATCH 06/10] doc: Remove note about auto-complete not working with hush   Simon Glass
• [U-Boot] [PATCH 07/10] x86: link: Tidy up the command lines options   Simon Glass
• [U-Boot] [PATCH 08/10] x86: config: link: Display the board model on the screen   Simon Glass
• [U-Boot] [PATCH 09/10] x86: Enable FIT, ELF on coreboot   Simon Glass
• [U-Boot] [PATCH 10/10] net: Display the size when tftpboot finishes   Simon Glass
• [U-Boot] [PATCH v2] dm: move platform data headers to include/dm/platform_data   Masahiro Yamada
• [U-Boot] [PATCH v2 01/15] dm: gpio: Support numbered GPIOs   Simon Glass
• [U-Boot] [PATCH v2 02/15] dm: serial: Reset the watchdog while waiting in getc()   Simon Glass
• [U-Boot] [PATCH v2 03/15] dm: serial: ns16550: Correct logic for checking for character   Simon Glass
• [U-Boot] [PATCH v2 04/15] dm: ns16550: Use an address instead of a pointer for the uart base   Simon Glass
• [U-Boot] [PATCH v2 05/15] dm: ns16550: Correct the probe logic for platform data   Simon Glass
• [U-Boot] [PATCH v2 06/15] dm: serial: Support CONFIG_CONS_INDEX if available   Simon Glass
• [U-Boot] [PATCH v2 07/15] dm: dts: omap: Select correct console for beaglebone   Simon Glass
• [U-Boot] [PATCH v2 08/15] dm: omap: gpio: Put _get_gpio_value() logic into its own function   Simon Glass
• [U-Boot] [PATCH v2 09/15] dm: omap: gpio: Support driver model   Simon Glass
• [U-Boot] [PATCH v2 10/15] dm: am33xx: Provide platform data for GPIOs   Simon Glass
• [U-Boot] [PATCH v2 11/15] dm: am33xx: Provide platform data for serial   Simon Glass
• [U-Boot] [PATCH v2 12/15] dm: omap: serial: Add driver model support   Simon Glass
• [U-Boot] [PATCH v2 13/15] dm: am335x: Remove serial options from CONFIG_SYS_EXTRA_OPTIONS   Simon Glass
• [U-Boot] [PATCH v2 14/15] dm: am33xx: Move to driver model for GPIO and serial   Simon Glass
• [U-Boot] [PATCH v2 15/15] dm: omap3: Move to driver model for GPIO and serial   Simon Glass
• [U-Boot] [PATCH 08/23] dm: gpio: Implement GPIO reservation in the uclass   Simon Glass
• [U-Boot] [PATCH 09/23] dm: gpio: Add gpio_get_function() and friends   Simon Glass
• [U-Boot] [PATCH 10/23] dm: Move the function for getting GPIO status into the uclass   Simon Glass
• [U-Boot] [PATCH 11/23] dm: gpio: sandbox: Implement the get_function() method   Simon Glass
• [U-Boot] [PATCH 12/23] dm: gpio: sandbox: Implement the remove() method   Simon Glass
• [U-Boot] [PATCH 13/23] dm: gpio: sandbox: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 14/23] test: dm: Update GPIO tests for new gpio_request() method   Simon Glass
• [U-Boot] [PATCH 15/23] dm: gpio: Add gpio_requestf() helper for printf() strings   Simon Glass
• [U-Boot] [PATCH 16/23] test: dm: Support memory leak checking as a core feature   Simon Glass
• [U-Boot] [PATCH 17/23] test: dm: Add additional GPIO tests   Simon Glass
• [U-Boot] [PATCH 18/23] dm: gpio: tegra: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 19/23] dm: gpio: omap3: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 20/23] dm: gpio: rpi_b: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 21/23] dm: gpio: exynos: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 22/23] dm: gpio: imx: Drop request()/free() in the driver   Simon Glass
• [U-Boot] [PATCH 23/23] dm: gpio: Remove unused get_state() uclass method   Simon Glass
• [U-Boot] [PATCH 1/8] dm: serial: ns16550: Add a cast to the I/O operations   Simon Glass
• [U-Boot] [PATCH 2/8] dm: x86: Remove ebp assembler warning in zimage.c   Simon Glass
• [U-Boot] [PATCH 3/8] dm: x86: Zero global data before board_init_f()   Simon Glass
• [U-Boot] [PATCH 4/8] dm: x86: Support pre-reloc malloc()   Simon Glass
• [U-Boot] [PATCH 5/8] dm: x86: Add a gpio header for coreboot   Simon Glass
• [U-Boot] [PATCH 6/8] dm: x86: Convert Intel ICH6 GPIO driver to use driver model   Simon Glass
• [U-Boot] [PATCH 7/8] dm: x86: dts: Add additional info to the serial port node   Simon Glass
• [U-Boot] [PATCH 8/8] dm: x86: Convert coreboot serial to use driver model   Simon Glass
• [U-Boot] [PATCH v2 1/8] serial: add static directive to local functions   Simon Glass
• [U-Boot] [PATCH v2 2/8] dm: serial: fix console putc   Simon Glass
• [U-Boot] [PATCH v2] dm: move platform data headers to include/dm/platform_data   Simon Glass
• [U-Boot] [PATCH v2 3/8] dm: serial: remove unnecessary casting   Simon Glass
• [U-Boot] [PATCH v2 4/8] dm: serial: consolidate common code more   Simon Glass
• [U-Boot] [PATCH v2 5/8] dm: add entries to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 6/8] dm: serial: use Driver Model for UniPhier serial driver   Simon Glass
• [U-Boot] [PATCH v2 7/8] serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 8/8] serial: remove uniphier_serial_initialize() call   Simon Glass
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCH 1/5] spi/ich.c: Fix a bug of reading from a non-64 bytes aligned address   Simon Glass
• [U-Boot] [PATCH 2/5] spi/ich.c: Set the rx operation mode for ich 7   Simon Glass
• [U-Boot] [PATCH 3/5] spi: sf: Support byte program for sst spi flash   Simon Glass
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Simon Glass
• [U-Boot] [PATCH 5/5] sf: Update SST25* flash params of sector size & numbers   Simon Glass
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Minkyu Kang
• [U-Boot] [PATCH] i2c: designware: Convert driver to multibus/multiadapter framework   Stefan Roese
• [U-Boot] [PATCH v2] i2c: designware: Convert driver to multibus/multiadapter framework   Stefan Roese
• [U-Boot] [PATCH v2 1/3] arm: odroid: pmic77686: allow bucket voltage settings   Jaehoon Chung
• [U-Boot] Please increase the image size for km boards   Valentin Longchamp
• [U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()   Jeroen Hofstee
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Stefano Babic
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Ye.Li
• [U-Boot] [PATCH 2/5] imx: mx6sl: Add perclk_clk_sel bit define in CCM   Ye.Li
• [U-Boot] [PATCH 3/5] imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source   Ye.Li
• [U-Boot] [PATCH 4/5] imx: mx6sl: Set the preclk clock source to OSC 24Mhz   Ye.Li
• [U-Boot] [PATCH 5/5] imx: mx6: Enable 24Mhz OSC for GPT clock source   Ye.Li
• [U-Boot] [PATCH v2] dm: move platform data headers to include/dm/platform_data   Stefano Babic
• [U-Boot] [PATCH 0/2] serial: UniPhier: fix UniPhier on-chip UART   Masahiro Yamada
• [U-Boot] [PATCH 1/2] serial: UniPhier: add .pending handler   Masahiro Yamada
• [U-Boot] [PATCH 2/2] serial: UniPhier: add static to locally used functions   Masahiro Yamada
• [U-Boot] Please pull u-boot-sunxi/master into master   Hans de Goede
• [U-Boot] [PATCH] ARM: sunxi: Fix Ippo-q8h-v5 defconfig filename   Chen-Yu Tsai
• [U-Boot] [PATCH] mpc85xx/kmp204x: raise u-boot size to 768KB   Valentin Longchamp
• [U-Boot] [PATCH] ARM: sunxi: Fix Ippo-q8h-v5 defconfig filename   Hans de Goede
• [U-Boot] [PATCH 1/2] ARM: atmel: spl: make initialization more stable   Bo Shen
• [U-Boot] [PATCH 2/2] ARM: atmel: spl: make css field configurable   Bo Shen
• [U-Boot] [U-Boot, v2, 1/6] dm: sunxi: dts: Add sun7i device tree files   Hans de Goede
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Hans de Goede
• [U-Boot] [PATCH] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board   Alison Wang
• [U-Boot] [U-Boot, v2, 3/6] dm: sunxi: Add pinmux functions which take a bank parameter   Hans de Goede
• [U-Boot] [U-Boot, v2, 4/6] dm: sunxi: Make sure that GPIOs are requested   Hans de Goede
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Hans de Goede
• [U-Boot] [U-Boot, v2, 6/6] dm: sunxi: Add support for serial using driver model   Hans de Goede
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [Patch] mmc: fsl_esdhc: fix f_max retrieval during init   Markus Niebel
• [U-Boot] [PATCH v2] ppc4xx: update PMC440 board support   Matthias Fuchs
• [U-Boot] [PATCH] ppc4xx: update PMC440 board support   Matthias Fuchs
• [U-Boot] [Patch] mmc: fsl_esdhc: fix f_max retrieval during init   Stefano Babic
• [U-Boot] [PATCH] ARM: sunxi: Fix Ippo-q8h-v5 defconfig filename   Hans de Goede
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Masahiro Yamada
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Ye.Li
• [U-Boot] [PATCH 2/5] imx: mx6sl: Add perclk_clk_sel bit define in CCM   Ye.Li
• [U-Boot] [PATCH 3/5] imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source   Ye.Li
• [U-Boot] [PATCH 4/5] imx: mx6sl: Set the preclk clock source to OSC 24Mhz   Ye.Li
• [U-Boot] [PATCH 5/5] imx: mx6: Enable 24Mhz OSC for GPT clock source   Ye.Li
• [U-Boot] [PATCH 1/7] powerpc: mpc512x: fix boot breakage   Wolfgang Denk
• [U-Boot] [PATCH 2/7] powerpc: mpc5121ads: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 3/7] powerpc: pdm360ng: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 4/7] powerpc: aria: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 5/7] powerpc: ac14xx: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 6/7] powerpc: mecp5123: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 7/7] powerpc: digsy_mtc: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH] powerpc: mpc5121ads: update board config info in README   Wolfgang Denk
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Stefano Babic
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Ian Campbell
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Hans de Goede
• [U-Boot] Relocation issue - need help!   Bill Pringlemeir
• [U-Boot] [PATCH v2 1/3] arm: arch-mx6: typo fixes in crm_regs.h   Soeren Moch
• [U-Boot] [PATCH v2 2/3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH v2 3/3] video: speedup writing strings to fb console   Soeren Moch
• [U-Boot] [PATCH 01/25] ppc: Zap ICU862 board   Marek Vasut
• [U-Boot] [PATCH] Freescale t104x: Do not exclude SGMII   Joakim Tjernlund
• [U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support   Tom Rini
• [U-Boot] [PATCH v4 1/1] Enable Android Fastboot support on am335x_evm board   Tom Rini
• [U-Boot] [RFC] Removal of doc/README.scrapyard   Marek Vasut
• [U-Boot] [PATCH v2 02/11] fdt: Report failure of ft_board_setup()   Anatolij Gustschin
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   Joakim Tjernlund
• [U-Boot] [PATCH 00/14] Set of fixes for Exynos4xxx boards   Przemyslaw Marczak
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Przemyslaw Marczak
• [U-Boot] [PATCH 02/14] exynos: common: enable generic fs operations   Przemyslaw Marczak
• [U-Boot] [PATCH 03/14] exynos4/4x12: cpu: add extra gpio base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 04/14] exynos4/4x12: gpio: use gpio extra base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 05/14] exynos4412: dts: fix bad gpio order in pinctrl   Przemyslaw Marczak
• [U-Boot] [PATCH 06/14] exynos4412: dts: adjust pinctrl-uboot to changed gpio order   Przemyslaw Marczak
• [U-Boot] [PATCH 07/14] exynos4210: dts: fix gpio offset in pinctrl-uboot   Przemyslaw Marczak
• [U-Boot] [PATCH 08/14] universal: request soft i2c gpio   Przemyslaw Marczak
• [U-Boot] [PATCH 08/14] universal: request soft i2c/spi gpio   Przemyslaw Marczak
• [U-Boot] [PATCH 09/14] universal: dts: adjust gpio numbers to new api   Przemyslaw Marczak
• [U-Boot] [PATCH 10/14] trats: dts: adjust gpio numbers to new api   Przemyslaw Marczak
• [U-Boot] [PATCH 11/14] trats2: dts: adjust gpio numbers after gpio rework   Przemyslaw Marczak
• [U-Boot] [PATCH 12/14] odroid: dts: adjust sd cd-gpios for SD Card   Przemyslaw Marczak
• [U-Boot] [PATCH 13/14] odroid: dts: fix name of included dtsi   Przemyslaw Marczak
• [U-Boot] [PATCH 14/14] odroid: adjust gpio calls to dm gpio api   Przemyslaw Marczak
• [U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure   Anatolij Gustschin
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/3] arm: odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH 08/14] universal: request soft i2c/spi gpio   Przemyslaw Marczak
• [U-Boot] WARNING Could not get liodn of node /pcie at ffe240000: FDT_ERR_NOTFOUND   York Sun
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [RFC PATCH 7/7] Switch am335x_evm.h to use config_distro_defaults and config_distro_bootcmd. Add scriptaddr to DEFAULT_LINUX_BOOT_ENV, as scriptaddr is used for boot scripts in config_distro_bootcmd.   Dennis Gilmore
• [U-Boot] [PATCH v2 03/11] fdt: Export the fdt_find_or_add_subnode() function   Anatolij Gustschin
• [U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()   Jeroen Hofstee
• [U-Boot] [PATCH 0/10] Provide inttypes.h to avoid 32/64 bit problems with printf()   Simon Glass
• [U-Boot] tps65910x I2C RTC driver   Tom Rini
• [U-Boot] [PATCH] fdt_support: fix unaligned u64 accesses in fdt_fixup_memory_banks   Simon Glass
• [U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure   Tom Rini
• [U-Boot] [PATCH v2 02/11] fdt: Report failure of ft_board_setup()   Tom Rini
• [U-Boot] [PATCH v2 03/11] fdt: Export the fdt_find_or_add_subnode() function   Tom Rini
• [U-Boot] [PATCH v2 05/11] fdt: Use the correct return types for fdtdec_decode_region()   Tom Rini
• [U-Boot] [PATCH v2 06/11] fdt: Enhance flashmap function to deal with region properties   Tom Rini
• [U-Boot] [PATCH v2 07/11] fdt: Tidy up error handling in image_setup_libfdt()   Tom Rini
• [U-Boot] [PATCH] Use __stringify() instead of xstr()   Anatolij Gustschin
• [U-Boot] [PATCH] sun7i: Drop CONFIG_ARMV7_PSCI_NR_CPUS   Hans de Goede
• [U-Boot] [PATCH v4 0/2] ARM: Add non-secure / virt Kconfig options and allow secure boot on non-secure configs   Hans de Goede
• [U-Boot] [PATCH 1/2] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Hans de Goede
• [U-Boot] [PATCH 2/2] ARM: bootm: Allow booting in secure mode on hyp capable systems   Hans de Goede
• [U-Boot] [PATCH v2] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH v2] sun7i: Set ARMV7_BOOT_SEC_DEFAULT when OLD_SUNXI_KERNEL_COMPAT is set   Hans de Goede
• [U-Boot] [PATCH] ARM: tegra: increase buffer size and sys args num   Michael Scott
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Tom Rini
• [U-Boot] [PATCH v2 09/11] fdt: Change fdt_pack_reg() to static and fix types   Tom Rini
• [U-Boot] [PATCH v2 10/11] fdt: Add a function to decode a named memory region   Tom Rini
• [U-Boot] [PATCH v2 11/11] fdt: Try to use fdt_address_cells()/fdt_size_cells()   Tom Rini
• [U-Boot] [PATCH v2 08/11] fdt: Add ft_system_setup() function for system device tree additions   Tom Rini
• [U-Boot] [PATCH v2 04/13] dm: spl: Make simple malloc() available when enabled   Tom Rini
• [U-Boot] [PATCH v2 01/13] dm: dts: Move omap device tree includes to correct place   Tom Rini
• [U-Boot] [PATCH v2 02/13] dm: Split the simple malloc() implementation into its own file   Tom Rini
• [U-Boot] [PATCH v2 05/13] dm: spl: Allow driver model to be used   Tom Rini
• [U-Boot] [PATCH v2 07/13] dm: Allow stdio registration to be dropped   Tom Rini
• [U-Boot] [PATCH v2 08/13] dm: Disable dm_warn() in SPL   Tom Rini
• [U-Boot] [PATCH v2 11/13] dm: arm: spl: Make driver model linker lists available   Tom Rini
• [U-Boot] [PATCH v2 35/40] ARM: Implement non-cached memory support   Stephen Warren
• [U-Boot] [PATCH] arm: tegra: raise CONFIG_SYS_MALLOC_LEN to 32mb   Michael Scott
• [U-Boot] Collapsing buildman output dir?   Tom Rini
• [U-Boot] [RFC] Removal of doc/README.scrapyard   Wolfgang Denk
• [U-Boot] [PATCH v2 01/11] fdt: Allow ft_board_setup() to report failure   Simon Glass
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] [PATCH] cti_flash.c: use __weak for flash_(read|write){8, 16, 32, 64}   Tom Rini
• [U-Boot] [PATCH v2 0/7] sunxi: Kconfig consolidation and cleanup   Ian Campbell
• [U-Boot] [PATCH v2 1/7] sunxi: kconfig: Add top-level ARCH_SUNXI   Ian Campbell
• [U-Boot] [PATCH v2 2/7] sunxi: kconfig: Rename TARGET_SUN[45678]I to MACH_SUN[45678]I.   Ian Campbell
• [U-Boot] [PATCH v2 3/7] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option   Ian Campbell
• [U-Boot] [PATCH v2 4/7] sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?I   Ian Campbell
• [U-Boot] [PATCH v2 5/7] sunxi: Drop FEL variants of defconfigs.   Ian Campbell
• [U-Boot] [PATCH v2 6/7] sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD>   Ian Campbell
• [U-Boot] [PATCH v2 7/7] sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.   Ian Campbell
• [U-Boot] [PATCH] tools/kwbimage.c: fix parser error handling   andreas.devel at googlemail.com
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: config: Add USB support example   Marek Vasut
• [U-Boot] [PATCH 1/9] doc: Update README.scrapyard   Wolfgang Denk
• [U-Boot] [PATCH 1/2] README.scrapyard: update commit IDs   Wolfgang Denk
• [U-Boot] [PATCH 2/2] PowerPC: drop some 74xx_7xx boards and related code   Wolfgang Denk
• [U-Boot] [PATCH V8] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH 0/2] Fix u-boot compile on darwin host   andreas.devel at googlemail.com
• [U-Boot] [PATCH 1/2] tools/socfpgaimage.c: fix build on darwin   andreas.devel at googlemail.com
• [U-Boot] [PATCH 2/2] tools/kwbimage.c: fix build on darwin   andreas.devel at googlemail.com
• [U-Boot] [PATCH 1/2] tools/socfpgaimage.c: fix build on darwin   Marek Vasut
• [U-Boot] [PATCH 2/9] ppc: Zap ICU862 board   Wolfgang Denk
• [U-Boot] [PATCH 3/9] ppc: Zap MHPC board   Wolfgang Denk
• [U-Boot] [PATCH 4/9] ppc: Zap Hymod board   Wolfgang Denk
• [U-Boot] [PATCH 5/9] ppc: Zap HWW1U1A board   Wolfgang Denk
• [U-Boot] [PATCH 6/9] ppc: Zap IDS8247 board   Wolfgang Denk
• [U-Boot] [PATCH 7/9] ppc: Zap TQM8260 board   Wolfgang Denk
• [U-Boot] [PATCH 8/9] ppc: Zap TQM8272 board   Wolfgang Denk
• [U-Boot] [PATCH 9/9] arm: Zap tricorder-eeprom   Wolfgang Denk
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Andreas Bießmann
• [U-Boot] [PATCH 2/3] net: macb: enable GMAC IP without GE feature support   Andreas Bießmann
• [U-Boot] [RFC] Removal of doc/README.scrapyard   Simon Glass
• [U-Boot] [PATCH V8] ARM: mx6: Add support for Kosagi Novena   Nikolay Dimitrov
• [U-Boot] [PATCH V8] ARM: mx6: Add support for Kosagi Novena   Marek Vasut
• [U-Boot] [PATCH 9/9] arm: Zap tricorder-eeprom   Marek Vasut
• [U-Boot] [PATCH 9/9] arm: Zap tricorder-eeprom   Andreas Bießmann
• [U-Boot] [PATCH 9/9] arm: Zap tricorder-eeprom   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d4ek board support   Andreas Bießmann
• [U-Boot] [PATCH] modem.c: Switch to debug() from dbg found in common/console.c   Tom Rini
• [U-Boot] [PATCH v1 00/10] arm, at91, spl: add spl support for the taurus and corvus boards   Andreas Bießmann
• [U-Boot] [PATCH v1 01/10] arm, at91, mpddrc: fix typo in ddr2_init()   Andreas Bießmann
• [U-Boot] [PATCH v1 02/10] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45   Andreas Bießmann
• [U-Boot] [PATCH v1 03/10] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define   Andreas Bießmann
• [U-Boot] [PATCH] spl: move comment to the right place   andreas.devel at googlemail.com
• [U-Boot] [PATCH] gitignore: ignore atmel pmecc parameter tool   andreas.devel at googlemail.com
• [U-Boot] [PATCH v1 04/10] spl, nand: add option to boot raw u-boot.bin image only   Andreas Bießmann
• [U-Boot] [PATCH v1 05/10] mtd: atmel_nand: add missign include   Andreas Bießmann
• [U-Boot] [PATCH v1 07/10] spl, mtd, nand, atmel_nand: invert device ready pin logic   Andreas Bießmann
• [U-Boot] Card doesn't support part_switch   Brandon Williams
• [U-Boot] [PATCH] fdt_support: fix unaligned u64 accesses in fdt_fixup_memory_banks   Rob Herring
• [U-Boot] [PATCH v3 0/2] arm: marvell: sheevaplug: add FDT and fixes MTDPARTS   Gerald Kerma
• [U-Boot] [PATCH v3 1/2] arm: marvell: add LIBFDT support to sheevaplug   Gerald Kerma
• [U-Boot] [PATCH v3 2/2] arm: marvell: fix ENV and MTDPARTS for sheevaplug   Gerald Kerma
• [U-Boot] [BUG] kwimage v0 broken   drEagle
• [U-Boot] [PATCH 1/2] tools/socfpgaimage.c: fix build on darwin   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: config: Add USB support example   Pavel Machek
• [U-Boot] [patch] net: micrel: configure skew values for   Pavel Machek
• [U-Boot] [PATCH] power_spi.c: Rewrite pmic_reg function   Tom Rini
• [U-Boot] [PATCH 25/49] spi: make local functions static   Tom Rini
• [U-Boot] [patch] net: micrel: configure skew values for   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: config: Add USB support example   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Fabio Estevam
• [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Marek Vasut
• [U-Boot] [PATCH 1/2] tools/socfpgaimage.c: fix build on darwin   Marek Vasut
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Stephen Warren
• [U-Boot] [PATCH 0/4] dm: rpi: Move Raspberry Pi to use driver model   Simon Glass
• [U-Boot] [PATCH 1/2] exynos5250/arndale: Enable SATA/AHCI support.   Minkyu Kang
• [U-Boot] [PATCH 0/6] MIPS Kconfig updates   Daniel Schwierzeck
• [U-Boot] [PATCH 1/6] MIPS: kconfig: add options for endianess select   Daniel Schwierzeck
• [U-Boot] [PATCH 2/6] MIPS: kconfig: add options for CPU type select   Daniel Schwierzeck
• [U-Boot] [PATCH 3/6] MIPS: kconfig: globally define CONFIG_SYS_CPU for MIPS   Daniel Schwierzeck
• [U-Boot] [PATCH 4/6] MIPS: kconfig: merge targets qemu_mips and qemu_mips64   Daniel Schwierzeck
• [U-Boot] [PATCH 5/6] MIPS: kconfig: add options for dbau1x00 board variant select   Daniel Schwierzeck
• [U-Boot] [PATCH 6/6] MIPS: kconfig: add options for vct board variant select   Daniel Schwierzeck
• [U-Boot] Clarification about u-boot-2013.04   Wolfgang Denk
• [U-Boot] Conditional boot   Anatolij Gustschin
• [U-Boot] [PATCH for-next 2/3] sunxi: kconfig: Add top-level TARGET_SUNXI   Masahiro YAMADA
• [U-Boot] [RFC] MW rule and its period   Masahiro YAMADA
• [U-Boot] Clarification about u-boot-2013.04   Fabio Estevam
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Albert ARIBAUD
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB   Suriyan Ramasami
• [U-Boot] [PATCH 3/8] ARMv8/fsl-lsch3: Refactor spin-table code   Albert ARIBAUD
• [U-Boot] [PATCH] e1000: fix sw fw sync on igb i210/i211   Marcel Ziswiler
• [U-Boot] [PATCH v3 0/4] arm: fix exception handling   Georges Savoundararadj
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Georges Savoundararadj
• [U-Boot] [PATCH v3 2/4] arm: make .vectors section allocatable   Georges Savoundararadj
• [U-Boot] [PATCH v3 3/4] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] [PATCH v3 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Georges Savoundararadj
• [U-Boot] [PATCH v3 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/4] arm: make .vectors section allocatable   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Albert ARIBAUD
• [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/6] Introduce low-level debug for ARM architecture   Albert ARIBAUD
• [U-Boot] [U-Boot, 46/49] serial: add prototypes for init functions   Tom Rini
• [U-Boot] [PATCH 04/49] i2c: use __weak   Tom Rini
• [U-Boot] [U-Boot,01/49] arm: board: use __weak   Tom Rini
• [U-Boot] [U-Boot,02/49] common: board: use __weak   Tom Rini
• [U-Boot] [U-Boot,05/49] misc: use __weak   Tom Rini
• [U-Boot] [U-Boot,06/49] net: phy: fix warnings with W=1   Tom Rini
• [U-Boot] [U-Boot,07/49] pci: use __weak   Tom Rini
• [U-Boot] [U-Boot,08/49] samsung: board: use __weak   Tom Rini
• [U-Boot] [U-Boot,09/49] usb: use __weak   Tom Rini
• [U-Boot] [U-Boot,10/49] video: use __weak   Tom Rini
• [U-Boot] [U-Boot, 11/49] common: cmd_elf: make do_bootelf_exec static   Tom Rini
• [U-Boot] [U-Boot, 12/49] common: board_r: make local functions static   Tom Rini
• [U-Boot] [U-Boot, 13/49] disk/part.c: make local function static   Tom Rini
• [U-Boot] [U-Boot, 14/49] ehci-hcd.c: make local functions static   Tom Rini
• [U-Boot] [U-Boot,15/49] env_nand: make local functions static   Tom Rini
• [U-Boot] [U-Boot,16/49] eth: make eth_address_set static   Tom Rini
• [U-Boot] [U-Boot,17/49] gpio: make local functions static   Tom Rini
• [U-Boot] [U-Boot,18/49] image-fit: make local function static   Tom Rini
• [U-Boot] [U-Boot,19/49] lmb: make local functions static   Tom Rini
• [U-Boot] [U-Boot, 20/49] net: fec_mxc: make local functions static   Tom Rini
• [U-Boot] [U-Boot,21/49] omap3: make local functions static   Tom Rini
• [U-Boot] [U-Boot,23/49] sdhci: make local functions static   Tom Rini
• [U-Boot] [U-Boot,24/49] serial: make local functions static   Tom Rini
• [U-Boot] [U-Boot,26/49] tegra: make local functions static   Tom Rini
• [U-Boot] [U-Boot,27/49] video: ipu: prevent warnings with W=1   Tom Rini
• [U-Boot] [U-Boot,28/49] common:console: add missing include   Tom Rini
• [U-Boot] [U-Boot,29/49] string.h: add missing prototypes   Tom Rini
• [U-Boot] [U-Boot,30/49] arch-mx: add missing include   Tom Rini
• [U-Boot] [U-Boot,31/49] common/cmd_elf.c: add missing include   Tom Rini
• [U-Boot] [U-Boot,32/49] imx: add missing includes   Tom Rini
• [U-Boot] [U-Boot,33/49] leds: missing include   Tom Rini
• [U-Boot] [U-Boot,34/49] lib: bootm: add missing include   Tom Rini
• [U-Boot] [U-Boot, 35/49] mmc: bcm2835_sdhci: add missing include   Tom Rini
• [U-Boot] [U-Boot,36/49] net: davince: add missing include   Tom Rini
• [U-Boot] [U-Boot, 37/49] omap3: board: add missing include and proto   Tom Rini
• [U-Boot] [U-Boot,38/49] twister: add missing includes   Tom Rini
• [U-Boot] [U-Boot, 39/49] arm: vectors: provide protypes from vectors.S   Tom Rini
• [U-Boot] [U-Boot, 40/49] bootm: add prototype for arch_preboot_os   Tom Rini
• [U-Boot] [U-Boot,41/49] elf: add prototype for valid_elf_image   Tom Rini
• [U-Boot] [U-Boot, 42/49] fdt_support: add prototypes for __weak functions   Tom Rini
• [U-Boot] [U-Boot,43/49] gpio: add protype for name_to_gpio   Tom Rini
• [U-Boot] [U-Boot,44/49] ide: add missing prototype   Tom Rini
• [U-Boot] [U-Boot, 45/49] mmc: add prototype for mmc_get_env_addr   Tom Rini
• [U-Boot] [U-Boot, 47/49] spl: add prototype for jump_to_image_no_args   Tom Rini
• [U-Boot] [U-Boot,48/49] tegra: add proto for pin_mux_mmc   Tom Rini
• [U-Boot] [U-Boot,22/49] omap_gpmc: fix warnigs with W=1   Tom Rini
• [U-Boot] [U-Boot, 49/49] i2c: designware: add an implement i2c protos   Tom Rini
• [U-Boot] [PATCH] cti_flash.c: use __weak for flash_(read|write){8, 16, 32, 64}   Tom Rini
• [U-Boot] [PATCH] modem.c: Switch to debug() from dbg found in common/console.c   Tom Rini
• [U-Boot] [PATCH 03/49] cti_flash.c: use __weak when requested   Tom Rini
• [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi/master into master   Tom Rini
• [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: config: Add USB support example   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Bo Shen
• [U-Boot] [PATCH] powerpc/t2080: add serdes2 protocol 0x2e   Shengzhou Liu
• [U-Boot] [PATCH 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Josh Wu
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Li Ye-B37916
• [U-Boot] [PATCH v3 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB   Suriyan Ramasami
• [U-Boot] [PATCH 3/8] ARMv8/fsl-lsch3: Refactor spin-table code   arnab.basu at freescale.com
• [U-Boot] [RFC PATCH 7/7] Switch am335x_evm.h to use config_distro_defaults and config_distro_bootcmd. Add scriptaddr to DEFAULT_LINUX_BOOT_ENV, as scriptaddr is used for boot scripts in config_distro_bootcmd.   Rob Herring
• [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] tools/kwbimage.c: fix build on darwin   Stefan Roese
• [U-Boot] [BUG] kwimage v0 broken   Stefan Roese
• [U-Boot] [PATCH 0/6] MIPS Kconfig updates   Stefan Roese
• [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support   Stefan Roese
• [U-Boot] [PATCH 1/2] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Hans de Goede
• [U-Boot] [PATCH] power_spi.c: Rewrite pmic_reg function   Stefano Babic
• [U-Boot] Buildman cookbook   Wolfgang Denk
• [U-Boot] [PATCH v4 19/20] tools: kwbimage: Add image version 1 support for Armada XP / 370   Wolfgang Denk
• [U-Boot] [PATCH 1/2] ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options   Ian Campbell
• [U-Boot] [PATCH 00/14] Set of fixes for Exynos4xxx boards   Przemyslaw Marczak
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   Albert ARIBAUD
• [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER   René Griessl
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Albert ARIBAUD
• [U-Boot] [PATCH] arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support   Jagan Teki
• [U-Boot] [PATCH v2 1/3] arm: odroid: pmic77686: allow bucket voltage settings   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] [PATCH v2 7/7] sunxi: kconfig: Add %_felconfig rule to enable FEL build of sunxi platforms.   Hans de Goede
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Stefano Babic
• [U-Boot] [PATCH v1 1/1] odroid: Turn blue LED on in u-boot   Przemyslaw Marczak
• [U-Boot] [PATCH 1/8] powerpc/mpc85xx: Add T1024/T1023 SoC support   Shengzhou Liu
• [U-Boot] [PATCH 2/8] powerpc/t1024qds: Add T1024 QDS board support   Shengzhou Liu
• [U-Boot] [PATCH 3/8] powerpc/t1024rdb: Add T1024 RDB board support   Shengzhou Liu
• [U-Boot] [PATCH 4/8] net/fman: tune fman 10G driver to fit different SoC   Shengzhou Liu
• [U-Boot] [PATCH 5/8] board/t1024qds: some update for pin mux   Shengzhou Liu
• [U-Boot] [PATCH 6/8] net/phy: enable serdes autonegotiation for vsc8514 phy   Shengzhou Liu
• [U-Boot] [PATCH 7/8] t1024: increase IO drive strength   Shengzhou Liu
• [U-Boot] [PATCH 8/8] board/t1024qds: add retimer support on t1024qds   Shengzhou Liu
• [U-Boot] [PATCH] tools/kwbimage.c: fix parser error handling   Jeroen Hofstee
• [U-Boot] [PATCH] gic: fixed compilation error in GICv2 wait for interrupt macro   Yehuda Yitschak
• [U-Boot] [PATCH] tools/kwbimage: Fix compilation warning   Stefan Roese
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 00/19] [RFC] Power(full) framework based on Driver Model   Przemyslaw Marczak
• [U-Boot] [PATCH] tools/kwbimage: Fix compilation warning   Wolfgang Denk
• [U-Boot] [PATCH 2/8] powerpc/t1024qds: Add T1024 QDS board support   Wolfgang Denk
• [U-Boot] [PATCH 3/8] powerpc/t1024rdb: Add T1024 RDB board support   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Minkyu Kang
• [U-Boot] [PATCH] gic: fixed compilation error in GICv2 wait for interrupt macro   Albert ARIBAUD
• [U-Boot] [PATCH] tools/kwbimage: Fix compilation warning   Stefan Roese
• [U-Boot] [PATCH] git-mailrc: add pmic custodian   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] powerpc: tqm8xx*: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH 2/2] powerpc: TQM5200: convert to generic board   Wolfgang Denk
• [U-Boot] [PATCH] tools/kwbimage: Fix compilation warning   Wolfgang Denk
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Li Ye-B37916
• [U-Boot] Regression with ubifs initialization   Andrew Ruder
• [U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT   Stefano Babic
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Tom Rini
• [U-Boot] Card doesn't support part_switch   Tom Rini
• [U-Boot] [PATCH] gic: fixed compilation error in GICv2 wait for interrupt macro   Yehuda Yitschak
• [U-Boot] [PULL] u-boot-mpc5xxx / master   Wolfgang Denk
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Regression with ubifs initialization   Wolfgang Denk
• [U-Boot] Regression with ubifs initialization   Andrew Ruder
• [U-Boot] [PATCH] tftp: Displace check for server ip   Tom Rini
• [U-Boot] [PATCH] tools/kwbimage: Fix compilation warning   Stefan Roese
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Masahiro YAMADA
• [U-Boot] [RFC] MW rule and its period   Tom Rini
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Albert ARIBAUD
• [U-Boot] [PATCH 7/7] spi: altera: Move the config options to the top   Jagan Teki
• [U-Boot] [PATCH v2 0/2] SPI: mxc_spi: slave initialisation fixes   Jagan Teki
• [U-Boot] [PATCH] gic: fixed compilation error in GICv2 wait for interrupt macro   Albert ARIBAUD
• [U-Boot] [RFC] How to move lots of CONFIGs from header files to Kconfig   Masahiro YAMADA
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Masahiro YAMADA
• [U-Boot] [RFC] How to move lots of CONFIGs from header files to Kconfig   Nikita Kiryanov
• [U-Boot] [PATCH 3/5] spi: sf: Support byte program for sst spi flash   Jagan Teki
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Jagan Teki
• [U-Boot] [U-BOOT PATCH] zynq: Use GPLed files for SPL   Soren Brinkmann
• [U-Boot] [ 1/2] tqma6: fix sf detection   Jagan Teki
• [U-Boot] MKIMAGE u-boot.imx build error   Kucharczyk, David
• [U-Boot] [PATCH 1/2] mpc85xx/t208xqds: Adjust DDR timing parameters   York Sun
• [U-Boot] [PATCH 2/2] mpc85xx/t2080: Fix parsing DDR ratio for new revision   York Sun
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] powerpc/t1040qds: Update DDR option   York Sun
• [U-Boot] [PATCH 00/14] Set of fixes for Exynos4xxx boards   Simon Glass
• [U-Boot] [PATCH v2 04/11] fdt: Add device tree memory bindings   Simon Glass
• [U-Boot] Regression with ubifs initialization   Andrew Ruder
• [U-Boot] [PATCH v1 1/1] odroid: Turn blue LED on in u-boot   Suriyan Ramasami
• [U-Boot] [PATCH v2 1/3] arm: odroid: pmic77686: allow bucket voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH v2, rebased 0/3] reduce warnings with W=1   Jeroen Hofstee
• [U-Boot] [PATCH v2, rebased 1/3] i2c: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH v2, rebased 2/3] arm926ejs: cache: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH v2, rebased 3/3] serial: add prototypes for init functions   Jeroen Hofstee
• [U-Boot] [PATCH 04/49] i2c: use __weak   Jeroen Hofstee
• [U-Boot] [PATCH v3 1/1] fs: fat/ext4/sandbox: Deal with files > 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [PATCH v4 1/1] fs: fat/ext4/sandbox: Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH 1/2] am335x_evm: Add NOR to Kconfig   Tom Rini
• [U-Boot] [PATCH 2/2] am335x_evm: Convert NOR_BOOT to Kconfig   Tom Rini
• [U-Boot] U-Boot SPL on OMAP3 and peripheral boot and LG Optimus Black P970 (sniper) support   Paul Kocialkowski
• [U-Boot] [PATCH] e1000: fix sw fw sync on igb i210/i211   Tim Harvey
• [U-Boot] [PATCH v3 0/3] reduce warnings with W=1   Jeroen Hofstee
• [U-Boot] [PATCH v3 1/3] i2c: use __weak   Jeroen Hofstee
• [U-Boot] [PULL] u-boot-mpc5xxx / master   Tom Rini
• [U-Boot] e1000: add i211 and unprogrammed i210/i211 support   Tom Rini
• [U-Boot] stdio: staticize locally-used call-backs   Tom Rini
• [U-Boot] cli: hush: Adjust 'run' command to run each line of the env var   Tom Rini
• [U-Boot] wireless_space: set myself as maintainer   Tom Rini
• [U-Boot] doc: Fix comparison operator   Tom Rini
• [U-Boot] Revert "common, env: Fix support for environment in i2c eeprom"   Tom Rini
• [U-Boot] [U-Boot, 01/10] Provide option to avoid defining a custom version of uintptr_t.   Tom Rini
• [U-Boot] [U-Boot, 02/10] Add some standard headers external code might need   Tom Rini
• [U-Boot] [U-Boot,03/10] ext4: Use inttypes for printf() string   Tom Rini
• [U-Boot] [U-Boot,04/10] Use uint64_t for time types   Tom Rini
• [U-Boot] [U-Boot, 05/10] Use uint64_t instead of u64 in put_dec()   Tom Rini
• [U-Boot] [U-Boot, 06/10] Tidy up data sizes and function comment in display_options   Tom Rini
• [U-Boot] [U-Boot, 07/10] x86: Use correct printf() format string for uintptr_t   Tom Rini
• [U-Boot] [U-Boot, 08/10] scsi: Use correct printf() format string for uintptr_t   Tom Rini
• [U-Boot] [U-Boot, 09/10] usb: Use correct printf() format string for uintptr_t   Tom Rini
• [U-Boot] [U-Boot, 10/10] test: Add a simple test to detected warnings with uint64_t, uintptr_t   Tom Rini
• [U-Boot] [U-Boot, V2, 1/5] Rename some defines containing FAT in their name to be filesystem generic   Tom Rini
• [U-Boot] [U-Boot, V2, 3/5] doc: Update documentation according to the EXT SPL support patch set   Tom Rini
• [U-Boot] [U-Boot, V2, 4/5] spl: do not hang in spl_register_fat_device but return error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT.   Tom Rini
• [U-Boot] [U-Boot, V2, 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards   Tom Rini
• [U-Boot] aboot: fix block addressing for don't care chunk type   Tom Rini
• [U-Boot] [U-Boot,RFC] net/e1000: Fix EEPROM access error   Tom Rini
• [U-Boot] common/cmd_io.c: Fix incorrect help for iod/iow   Tom Rini
• [U-Boot] [U-Boot,v4,1/2] kconfig: add CONFIG_SUPPORT_SPL   Tom Rini
• [U-Boot] [U-Boot,v4,2/2] kconfig: add CONFIG_SUPPORT_TPL   Tom Rini
• [U-Boot] README.kconfig: fix typo   Tom Rini
• [U-Boot] e1000: fix sw fw sync on igb i210/i211   Tom Rini
• [U-Boot] doc: fix README.standalone   Tom Rini
• [U-Boot] Correct single misspelling of "consitant" in source tree.   Tom Rini
• [U-Boot] Correct two non-functional misspellings "overrided".   Tom Rini
• [U-Boot] common: command: trivial coding style fixes   Tom Rini
• [U-Boot] cmd_mem: call unmap_sysmem() after map_sysmem()   Tom Rini
• [U-Boot] arm: db-mv784mp-gp/maxbcm Add placeholder bin_hdr file so that linking works   Tom Rini
• [U-Boot] [U-Boot,v3] image: Fix Android boot image support   Tom Rini
• [U-Boot] [U-Boot,v2] ppc4xx: update PMC440 board support   Tom Rini
• [U-Boot] Use __stringify() instead of xstr()   Tom Rini
• [U-Boot] spl: move comment to the right place   Tom Rini
• [U-Boot] gitignore: ignore atmel pmecc parameter tool   Tom Rini
• [U-Boot] git-mailrc: add pmic custodian   Tom Rini
• [U-Boot] [U-Boot,V2,2/5] spl: Add EXT support to SPL   Tom Rini
• [U-Boot] [Patch] mmc: fsl_esdhc: fix f_max retrieval during init   Eric Nelson
• [U-Boot] clang warning   Jeroen Hofstee
• [U-Boot] [PATCH v4 1/1] fs: fat/ext4/sandbox: Deal with files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v2 00/40] ARM: tegra: Add PCIe support   Simon Glass
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Simon Glass
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH v2 04/13] dm: spl: Make simple malloc() available when enabled   Simon Glass
• [U-Boot] [PATCH] fdt_support: fix unaligned u64 accesses in fdt_fixup_memory_banks   Simon Glass
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Simon Glass
• [U-Boot] MKIMAGE u-boot.imx build error   Simon Glass
• [U-Boot] [U-Boot, v2, 1/6] dm: sunxi: dts: Add sun7i device tree files   Simon Glass
• [U-Boot] Sandbox support for extra features   Simon Glass
• [U-Boot] e1000: add i211 and unprogrammed i210/i211 support   Marcel Ziswiler
• [U-Boot] [PATCH 02/14] exynos: common: enable generic fs operations   Simon Glass
• [U-Boot] [PATCH 03/14] exynos4/4x12: cpu: add extra gpio base addresses   Simon Glass
• [U-Boot] [PATCH 04/14] exynos4/4x12: gpio: use gpio extra base addresses   Simon Glass
• [U-Boot] [PATCH 05/14] exynos4412: dts: fix bad gpio order in pinctrl   Simon Glass
• [U-Boot] [PATCH 06/14] exynos4412: dts: adjust pinctrl-uboot to changed gpio order   Simon Glass
• [U-Boot] [PATCH 07/14] exynos4210: dts: fix gpio offset in pinctrl-uboot   Simon Glass
• [U-Boot] [PATCH 08/14] universal: request soft i2c gpio   Simon Glass
• [U-Boot] [PATCH 09/14] universal: dts: adjust gpio numbers to new api   Simon Glass
• [U-Boot] [PATCH 10/14] trats: dts: adjust gpio numbers to new api   Simon Glass
• [U-Boot] [PATCH 11/14] trats2: dts: adjust gpio numbers after gpio rework   Simon Glass
• [U-Boot] [PATCH 12/14] odroid: dts: adjust sd cd-gpios for SD Card   Simon Glass
• [U-Boot] [PATCH 13/14] odroid: dts: fix name of included dtsi   Simon Glass
• [U-Boot] [PATCH 42/42] ARM: tegra: colibri_t30: comment style fix   Marcel Ziswiler
• [U-Boot] [PATCH 14/14] odroid: adjust gpio calls to dm gpio api   Simon Glass
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Simon Glass
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Bin Meng
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Simon Glass
• [U-Boot] [PATCH 02/14] exynos: common: enable generic fs operations   Simon Glass
• [U-Boot] [PATCH 05/14] exynos4412: dts: fix bad gpio order in pinctrl   Simon Glass
• [U-Boot] [PATCH 06/14] exynos4412: dts: adjust pinctrl-uboot to changed gpio order   Simon Glass
• [U-Boot] [PATCH 07/14] exynos4210: dts: fix gpio offset in pinctrl-uboot   Simon Glass
• [U-Boot] [PATCH 08/14] universal: request soft i2c gpio   Simon Glass
• [U-Boot] [PATCH 09/14] universal: dts: adjust gpio numbers to new api   Simon Glass
• [U-Boot] [PATCH 10/14] trats: dts: adjust gpio numbers to new api   Simon Glass
• [U-Boot] [PATCH 11/14] trats2: dts: adjust gpio numbers after gpio rework   Simon Glass
• [U-Boot] [PATCH 12/14] odroid: dts: adjust sd cd-gpios for SD Card   Simon Glass
• [U-Boot] [PATCH 13/14] odroid: dts: fix name of included dtsi   Simon Glass
• [U-Boot] Please pull u-boot-dm.git   Simon Glass
• [U-Boot] [PATCH 00/14] Set of fixes for Exynos4xxx boards   Simon Glass
• [U-Boot] [PATCH 3/5] spi: sf: Support byte program for sst spi flash   Bin Meng
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   Huan Wang
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Yuantian Tang
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Chen-Yu Tsai
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Simon Glass
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Chen-Yu Tsai
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Jaehoon Chung
• [U-Boot] [PATCH 2/4] ARM: HYP/non-sec: Make armv7_init_nonsec() usable before relocation   Albert ARIBAUD
• [U-Boot] [RFC] How to move lots of CONFIGs from header files to Kconfig   Albert ARIBAUD
• [U-Boot] [PATCH] gic: fixed compilation error in GICv2 wait for interrupt macro   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Albert ARIBAUD
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Jagan Teki
• [U-Boot] [PATCH 01/14] mmc: s5p: set SD detection pin as input   Przemyslaw Marczak
• [U-Boot] [PATCH 03/14] exynos4/4x12: cpu: add extra gpio base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 04/14] exynos4/4x12: gpio: use gpio extra base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 14/14] odroid: adjust gpio calls to dm gpio api   Przemyslaw Marczak
• [U-Boot] [PATCH 00/14] Set of fixes for Exynos4xxx boards   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Przemyslaw Marczak
• [U-Boot] git-mailrc: add pmic custodian   Przemyslaw Marczak
• [U-Boot] [PATCH v1 1/1] odroid: Turn blue LED on in u-boot   Przemyslaw Marczak
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Bo Shen
• [U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet   Albert ARIBAUD
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Bin Meng
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Hans de Goede
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Bo Shen
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Wolfgang Denk
• [U-Boot] [PATCH 1/3] atmel_nand: if don't have gf table in rom code we will build it runtime   Andreas Bießmann
• [U-Boot] [PATCH v1 0/9] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)   Stefan Roese
• [U-Boot] [PATCH v1 1/9] arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr   Stefan Roese
• [U-Boot] [PATCH v1 2/9] arm: mvebu: Add Serdes PHY config code   Stefan Roese
• [U-Boot] [PATCH v1 3/9] arm: armada-xp: Add SPL support used to include the DDR training code   Stefan Roese
• [U-Boot] [PATCH v1 4/9] scripts/Makefile.spl: Add MVEBU DDR code to SPL   Stefan Roese
• [U-Boot] [PATCH v1 5/9] tools: kwbimage: Support u-boot.img padding to CONFIG_SYS_SPI_U_BOOT_OFFS   Stefan Roese
• [U-Boot] [PATCH v1 6/9] Makefile: Add another kwb build target used on Marvell Armada-XP (AXP)   Stefan Roese
• [U-Boot] [PATCH v1 7/9] arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-Boot   Stefan Roese
• [U-Boot] [PATCH v1 8/9] arm: maxbcm: Enable SPL to include DDR training code into U-Boot   Stefan Roese
• [U-Boot] [PATCH v1 9/9] arm: armada-xp: Change built target to include the SPL binary as bin_hdr   Stefan Roese
• [U-Boot] [PATCH v2 1/5] imx: gpt: Add High frequency clock source support for GPT   Ye.Li
• [U-Boot] [PATCH v2 2/5] imx: mx6sl: Add perclk_clk_sel bit define in CCM   Ye.Li
• [U-Boot] [PATCH v2 3/5] imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source   Ye.Li
• [U-Boot] [PATCH v2 4/5] imx: mx6sl: Set the preclk clock source to OSC 24Mhz   Ye.Li
• [U-Boot] [PATCH v2 5/5] imx: mx6: Enable high frequency clock source for GPT   Ye.Li
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Wolfgang Denk
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Reinhard Meyer
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Jagan Teki
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Wolfgang Denk
• [U-Boot] [PATCH v2] tools/kwbimage: Fix compilation warning   Stefan Roese
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Reinhard Meyer
• [U-Boot] [PATCH v2] tools/kwbimage: Fix compilation warning   Wolfgang Denk
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Bin Meng
• [U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target   Wolfgang Denk
• [U-Boot] [PATCH] fdt_support: fix unaligned u64 accesses in fdt_fixup_memory_banks   Måns Rullgård
• [U-Boot] [PATCH v3] i2c: designware: Convert driver to multibus/multiadapter framework   Stefan Roese
• [U-Boot] e1000: add i211 and unprogrammed i210/i211 support   Tom Rini
• [U-Boot] u-boot, fsl_espi.c driver   Mingkai.Hu at freescale.com
• [U-Boot] clang warning   Nikita Kiryanov
• [U-Boot] [PATCH] dwc_ahsata: use bitwise operator in sata_port_status   Nikita Kiryanov
• [U-Boot] putc   Martin Dorwig
• [U-Boot] [PATCH] twl4030: TWL4030 VMMC2 3.2V enable on MMC init   Paul Kocialkowski
• [U-Boot] [PATCH v4 1/1] fs: fat/ext4/sandbox: Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [U-Boot, v2, 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Maxime Ripard
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs   Wolfgang Denk
• [U-Boot] [PATCH 2/2] ppc/arm: zap EMK boards   Wolfgang Denk
• [U-Boot] [PATCH] twl4030: More voltages on VAUX2 and VAUX3   Paul Kocialkowski
• [U-Boot] [PATCH] sunxi: fix MAINTAINERS   Masahiro Yamada
• [U-Boot] Sandbox support for extra features   Jagan Teki
• [U-Boot] [PATCH] sunxi: fix MAINTAINERS   Masahiro YAMADA
• [U-Boot] [PATCH v3 4/8] common: spl: Add interactive DDR debugger support for SPL image   York Sun
• [U-Boot] [PATCH] twl4030: TWL4030 VMMC2 3.2V enable on MMC init   Igor Grinberg
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Masahiro YAMADA
• [U-Boot] [PATCH] twl4030: TWL4030 VMMC2 3.2V enable on MMC init   Paul Kocialkowski
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Masahiro YAMADA
• [U-Boot] [PATCH] Correct two non-functional misspellings "overrided".   Masahiro YAMADA
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Masahiro YAMADA
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH 3/3] odroid: adjust gpio calls to dm gpio api   Przemyslaw Marczak
• [U-Boot] [RFC] MW rule and its period   Masahiro YAMADA
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Masahiro YAMADA
• [U-Boot] [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses   Przemyslaw Marczak
• [U-Boot] [PATCH] ARM: UniPhier: make pinmon command optional   Masahiro YAMADA
• [U-Boot] [PATCH 0/2] serial: UniPhier: fix UniPhier on-chip UART   Masahiro YAMADA
• [U-Boot] [PATCH v2] twl4030: VMMC2 3.2V enable on MMC init   Paul Kocialkowski
• [U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init   Paul Kocialkowski
• [U-Boot] [PATCH] power: LP8720 regulator support   Paul Kocialkowski
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Jeroen Hofstee
• [U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init   Igor Grinberg
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init   Paul Kocialkowski
• [U-Boot] [PATCH] dwc_ahsata: use bitwise operator in sata_port_status   Jeroen Hofstee
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH v3 1/4] kconfig: arm: introduce symbol for ARM CPUs   Georges Savoundararadj
• [U-Boot] [PATCH v4 0/4] arm: fix exception handling   Georges Savoundararadj
• [U-Boot] [PATCH v4 1/4] kconfig: arm: introduce symbol for ARM CPUs   Georges Savoundararadj
• [U-Boot] [PATCH v4 2/4] arm: make .vectors section allocatable   Georges Savoundararadj
• [U-Boot] [PATCH v4 3/4] arm: relocate the exception vectors   Georges Savoundararadj
• [U-Boot] [PATCH v4 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Georges Savoundararadj
• [U-Boot] [PATCH 07/10] mtd: nand: s3c: Add missing correction and select_chip functions   Scott Wood
• [U-Boot] Please pull u-boot-dm.git   Tom Rini
• [U-Boot] [PATCH] dwc_ahsata: use bitwise operator in sata_port_status   Tom Rini
• [U-Boot] [PATCH 1/2] doc/README.scrapyard: update commit IDs   Tom Rini
• [U-Boot] [PATCH 2/2] ppc/arm: zap EMK boards   Tom Rini
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH 2/2] ppc/arm: zap EMK boards   Wolfgang Denk
• [U-Boot] [PATCH v5 1/1] Enable Android Fastboot support on am335x_evm board   Dileep Katta
• [U-Boot] [PATCH v2 0/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH v2 1/3] mtd: atmel_nand: runtime to build gf table for pmecc   Bo Shen
• [U-Boot] [PATCH v2 2/3] net: macb: enable GMAC IP without GE feature support   Bo Shen
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH 3/3] odroid: adjust gpio calls to dm gpio api   Simon Glass
• [U-Boot] [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses   Simon Glass
• [U-Boot] [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses   Simon Glass
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [PATCH v2 1/3] mtd: atmel_nand: runtime to build gf table for pmecc   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add sama5d4ek board support   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add sama5d4ek board support   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH v3 0/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH v3 1/3] mtd: atmel_nand: runtime to build gf table for pmecc   Bo Shen
• [U-Boot] [PATCH v3 2/3] net: macb: enable GMAC IP without GE feature support   Bo Shen
• [U-Boot] [PATCH v3 3/3] ARM: atmel: add sama5d4ek board support   Bo Shen
• [U-Boot] [PATCH] ARM: sunxi: Fix Ippo-q8h-v5 defconfig filename   Masahiro Yamada
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Jagan Teki
• [U-Boot] [PATCH 4/5] sf: Update SST25* flash params of supported read commands   Bin Meng
• [U-Boot] [RFC PATCH 0/12] RFC: dm: Add I2C support   Heiko Schocher
• [U-Boot] [PATCH] ARM: atmel: add sama5d4 xplained ultra board support   Bo Shen
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [PATCH v4 1/4] kconfig: arm: introduce symbol for ARM CPUs   Masahiro Yamada
• [U-Boot] [RFC PATCH v1 0/9] sparc: Update SPARC architecture to generic board init   Francois Retief
• [U-Boot] [RFC PATCH v1 1/9] sparc: Add initr function for CMD_AMBAPP command   Francois Retief
• [U-Boot] [RFC PATCH v1 2/9] sparc: Initial work for generic board-init   Francois Retief
• [U-Boot] [RFC PATCH v1 3/9] sparc: Use microseconds instead of ticks for timeout   Francois Retief
• [U-Boot] [RFC PATCH v1 4/9] sparc: Major rewrite of the PROM generation code   Francois Retief
• [U-Boot] [RFC PATCH v1 5/9] sparc: Reworked LEON3 startup for generic board-init   Francois Retief
• [U-Boot] [RFC PATCH v1 6/9] sparc: Update all LEON3 boards to generic board-init   Francois Retief
• [U-Boot] [RFC PATCH v1 7/9] sparc: Make LEON serial drivers use readl/writel macros   Francois Retief
• [U-Boot] [RFC PATCH v1 8/9] sparc: Add MDIO support to GRETH driver   Francois Retief
• [U-Boot] [RFC PATCH v1 9/9] sparc: Add support for gr712rc-board   Francois Retief
• [U-Boot] [PATCH] ARM: sunxi: Fix Ippo-q8h-v5 defconfig filename   Hans de Goede
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Hans de Goede
• [U-Boot] [PATCH v1 00/10] arm, at91, spl: add spl support for the taurus and corvus boards   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] [PATCH 1/2] exynos5250/arndale: Enable SATA/AHCI support.   Ian Campbell
• [U-Boot] [U-BOOT PATCH] zynq: Use GPLed files for SPL   Jagan Teki
• [U-Boot] [U-boot] [Patch 0/4] keystone2: add network support for K2L SoC and EVM   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 1/4] ARM: keystone2: keysonte_nav: add support for K2L SoC   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 2/4] net: keystone_serdes: add keystone K2L SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 3/4] net: keystone_net: add Keystone2 K2L SoC support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch 4/4] board: k2l_evm: add network support   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch] ks2_evm: readme: add k2l evm board information   Ivan Khoronzhuk
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [PATCH v4 1/4] kconfig: arm: introduce symbol for ARM CPUs   Tom Rini
• [U-Boot] [U-Boot,V2,2/5] spl: Add EXT support to SPL   Guillaume Gardet
• [U-Boot] [PATCH v4 2/4] arm: make .vectors section allocatable   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/4] arm: relocate the exception vectors   Albert ARIBAUD
• [U-Boot] [PATCH v4 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/4] kconfig: arm: introduce symbol for ARM CPUs   Albert ARIBAUD
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Stefan Roese
• [U-Boot] [PATCH 0/3] cm-fx6 updates   Nikita Kiryanov
• [U-Boot] [PATCH 1/3] arm: mx6: cm_fx6: change issd gpio order   Nikita Kiryanov
• [U-Boot] [PATCH 2/3] arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo   Nikita Kiryanov
• [U-Boot] [PATCH 3/3] common: introduce board_preboot_os hook   Nikita Kiryanov
• [U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init   Igor Grinberg
• [U-Boot] Need FTP client support in U-Boot   Mythri, Madhukar (Artesyn)
• [U-Boot] [PATCH 3/3] common: introduce board_preboot_os hook   Jeroen Hofstee
• [U-Boot] MKIMAGE u-boot.imx build error   DaveKucharczyk
• [U-Boot] [U-BOOT PATCH] zynq: Use GPLed files for SPL   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro YAMADA
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] exynos5250/arndale: Enable SATA/AHCI support.   Minkyu Kang
• [U-Boot] Need FTP client support in U-Boot   Wally Yeh
• [U-Boot] MKIMAGE u-boot.imx build error   Fabio Estevam
• [U-Boot] Flat Image Tree and boot arguments   Weiß Christoph
• [U-Boot] [U-boot] [Patch] ks2_evm: config: enable fatload command   Ivan Khoronzhuk
• [U-Boot] MKIMAGE u-boot.imx build error   DaveKucharczyk
• [U-Boot] Need FTP client support in U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v1 0/2] Fix some ppc4xx i2c controller issues   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 1/2] ppc4xx: Fix i2c repeated start   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 2/2] ppc4xx: Handle i2c stuck on combined xfer   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 0/6] Update gdsys board support   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 1/6] board: dlvision: Reduce memory footprint   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 2/6] mtd: Handle 29LV800BT   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 3/6] common: Fix cmd_fpgad addressing   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 4/6] board: dlvision-10g: Compile fix   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 5/6] board: iocon: Fix fpga index in print_fpga_info()   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v1 6/6] mpc83xx: Add gdsys hrcon board   dirk.eibach at gdsys.cc
• [U-Boot] Buildman cookbook   Simon Glass
• [U-Boot] Flat Image Tree and boot arguments   Jagan Teki
• [U-Boot] Buildman cookbook   Dirk Eibach
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [PATCH v4 1/4] kconfig: arm: introduce symbol for ARM CPUs   Tom Rini
• [U-Boot] [PATCH v4 2/4] arm: make .vectors section allocatable   Tom Rini
• [U-Boot] [PATCH v4 3/4] arm: relocate the exception vectors   Tom Rini
• [U-Boot] [PATCH v4 4/4] arm: interrupt_init: set sp in IRQ/FIQ modes   Tom Rini
• [U-Boot] [PATCH 3/3] common: introduce board_preboot_os hook   Otavio Salvador
• [U-Boot] Buildman cookbook   Wolfgang Denk
• [U-Boot] [PULL] u-boot-mpc5xxx / master   Wolfgang Denk
• [U-Boot] [PATCH 3/3] common: introduce board_preboot_os hook   Nikita Kiryanov
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Jagan Teki
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates   Nikita Kiryanov
• [U-Boot] [PATCH V2 1/4] arm: mx6: cm_fx6: change issd gpio order   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/4] arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo   Nikita Kiryanov
• [U-Boot] [PATCH V2 3/4] common: introduce board_preboot_os hook   Nikita Kiryanov
• [U-Boot] [PATCH V2 4/4] arm: mx6: cm_fx6: power down sata on OS boot   Nikita Kiryanov
• [U-Boot] [PATCH V2 3/4] common: introduce board_preboot_os hook   Otavio Salvador
• [U-Boot] [PATCH V2 4/4] arm: mx6: cm_fx6: power down sata on OS boot   Otavio Salvador
• [U-Boot] [PATCH V2 1/4] arm: mx6: cm_fx6: change issd gpio order   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/4] arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo   Nikita Kiryanov
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Stefan Roese
• [U-Boot] [PATCH v3 1/3] arm: odroid: pmic77686: allow buck voltage settings   Suriyan Ramasami
• [U-Boot] [PATCH v3 2/3] arm: odroid: enable/disable usb host phy for exynos4412   Suriyan Ramasami
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] Flat Image Tree and boot arguments   Stephen Warren
• [U-Boot] MKIMAGE u-boot.imx build error   Stefano Babic
• [U-Boot] [PATCH 1/2][v2] powerpc/mpc85xx:Put errata number for T104x NAND boot issue   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2][v2] board/t104xrdb: Conditional workaround of errata A-008044   Prabhakar Kushwaha
• [U-Boot] [PATCH] arm: imx: make bmode command work with SPL/U-Boot combo   Nikita Kiryanov
• [U-Boot] [PATCH v2] zynq: Use GPLed files for SPL   Soren Brinkmann
• [U-Boot] [PATCH] MIPS: add .padding section to linker script   Daniel Schwierzeck
• [U-Boot] Buildman cookbook   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: refactor setting of compiler options   Daniel Schwierzeck
• [U-Boot] [U-boot] [Patch] net: phy: marvell: add errata w/a for 88E151* chips   Ivan Khoronzhuk
• [U-Boot] u-boot, fsl_espi.c driver   Joakim Tjernlund
• [U-Boot] Sandbox support for extra features   Simon Glass
• [U-Boot] putc   Simon Glass
• [U-Boot] [PATCH v2 0/9] dm: Introduce driver model for Atmel at91   Simon Glass
• [U-Boot] [PATCH v2 1/9] dm: at91: Correct text base for snapper9260   Simon Glass
• [U-Boot] [PATCH v2 2/9] dm: at91: Move snapper9260 to generic baord   Simon Glass
• [U-Boot] [PATCH v2 3/9] dm: at91: Add driver model support for atmel GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 4/9] dm: at91: Add platform data for GPIO on at91sam9260-based boards   Simon Glass
• [U-Boot] [PATCH v2 5/9] dm: at91: Refactor serial driver slightly for driver model   Simon Glass
• [U-Boot] [PATCH v2 6/9] dm: at91: Add driver model support for the serial driver   Simon Glass
• [U-Boot] [PATCH v2 7/9] dm: at91: Convert snapper9260 to use driver model   Simon Glass
• [U-Boot] [PATCH v2 8/9] dm: at91: Add myself as maintainer for snapper9260   Simon Glass
• [U-Boot] [PATCH v2 9/9] dm: serial: Support changing the baud rate   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Simon Glass
• [U-Boot] Collapsing buildman output dir?   Simon Glass
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Simon Glass
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Pavel Machek
• [U-Boot] MKIMAGE u-boot.imx build error   Fabio Estevam
• [U-Boot] [PATCH 1/6] dlmalloc: ensure gd is set for early alloc   Rabin Vincent
• [U-Boot] [PATCH 2/6] sandbox: init cli for -c   Rabin Vincent
• [U-Boot] [PATCH 3/6] hush: return consistent codes from run_command()   Rabin Vincent
• [U-Boot] [PATCH 4/6] hush: fix segfault on syntax error   Rabin Vincent
• [U-Boot] [PATCH 5/6] hush: make run_command() return an error on parsing failure   Rabin Vincent
• [U-Boot] [PATCH 6/6] hush: add some tests for quoting   Rabin Vincent
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Jaehoon Chung
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Simon Glass
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/6] kbuild: bug fixes and cleanups of Makefile.host   Masahiro Yamada
• [U-Boot] [PATCH 2/6] kbuild: improve multi-objs dependency and cleanups   Masahiro Yamada
• [U-Boot] [PATCH 3/6] kbuild: sync top Makefile with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 4/6] kconfig: sync kconfig files with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 5/6] kbuild: sync misc scripts with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 6/6] kbuild: Make scripts executable   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: drop clang-specific extra warnings   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: remove "clobber" target   Masahiro Yamada
• [U-Boot] [PATCH 0/6] kbuild, kconfig: sync with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/6] kbuild: bug fixes and cleanups of Makefile.host   Masahiro Yamada
• [U-Boot] [PATCH 2/6] kbuild: improve multi-objs dependency and cleanups   Masahiro Yamada
• [U-Boot] [PATCH 3/6] kbuild: sync top Makefile with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 4/6] kconfig: sync kconfig files with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 5/6] kbuild: sync misc scripts with Linux 3.18-rc1   Masahiro Yamada
• [U-Boot] [PATCH 6/6] kbuild: Make scripts executable   Masahiro Yamada
• [U-Boot] [PATCH] u_qe: add u_qe_upload_firmware for u_qe   Zhao Qiang
• [U-Boot] [PATCH 2/4] qe: add u-qe support to arm board   qiang.zhao at freescale.com
• [U-Boot] FW: [PATCH] u_qe: add u_qe_upload_firmware for u_qe   qiang.zhao at freescale.com
• [U-Boot] [PATCH] serial: UniPhier: borrow macros from linux/serial_reg.h   Masahiro Yamada
• [U-Boot] [PATCH v2] zynq: Use GPLed files for SPL   Masahiro Yamada
• [U-Boot] [RFC] fs: make it possible to read the filesystem UUID   Stephen Warren
• [U-Boot] [RFC] Removal of CREDITS   Masahiro Yamada
• [U-Boot] Sync ARM subsystem repos with the upstream   Masahiro Yamada
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Stefan Roese
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] [PATCH] drivers: usb: fsl: Check USB Erratum A007792 applicability   Nikhil Badola
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami
• [U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet   Suriyan Ramasami
• [U-Boot] Query on the ci_udc driver for USB client implementation   Sanchayan Maity
• [U-Boot] [RFC] Removal of CREDITS   Wolfgang Denk
• [U-Boot] [PATCH v4] powerpc/mpc85xx: modify erratum A007186   Zhao Qiang
• [U-Boot] [PATCH v3] zynq: Use GPLed files for SPL   Soren Brinkmann
• [U-Boot] [PATCH] arm:ls1021a:configure ls1021 scfg for QSPI   Chao Fu
• [U-Boot] [PATCH 0/5] sparc: some refactoring before generic board conversion and a new board   Masahiro Yamada
• [U-Boot] [PATCH 1/5] sparc: Use nicer prompt for board select menu   Masahiro Yamada
• [U-Boot] [PATCH 2/5] sparc: move CONFIG_{LEON, LEON2, LEON3} to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 3/5] sparc: merge arch/sparc/cpu/*/config.mk to arch/sparc/config.mk   Masahiro Yamada
• [U-Boot] [PATCH 4/5] sparc: merge CONFIG_SYS_CPU and CONFIG_SYS_VENDOR defines   Masahiro Yamada
• [U-Boot] [PATCH 5/5] sparc: move CONFIG_SYS_TEXT_BASE to Kconfig   Masahiro Yamada
• [U-Boot] [RFC PATCH v1 9/9] sparc: Add support for gr712rc-board   Masahiro Yamada
• [U-Boot] [PATCH] Remove the CREDITS file   Masahiro Yamada
• [U-Boot] [U-boot] [Patch] net: phy: marvell: add errata w/a for 88E151* chips   Stefan Roese
• [U-Boot] [PATCH v1 2/2] ppc4xx: Handle i2c stuck on combined xfer   Heiko Schocher
• [U-Boot] [PATCH v1 2/2] ppc4xx: Handle i2c stuck on combined xfer   Dirk Eibach
• [U-Boot] Need FTP client support in U-Boot   Gilles Chanteperdrix
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH v3] zynq: Use GPLed files for SPL   Masahiro Yamada
• [U-Boot] [PATCH] sunxi: Ippo_q8h_v5: fix config name typo   Albert ARIBAUD
• [U-Boot] [PATCH] sunxi: Ippo_q8h_v5: fix config name typo   Masahiro Yamada
• [U-Boot] u-boot 1.1.6 binary file   Roar Pettersen
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Masahiro Yamada
• [U-Boot] Collapsing buildman output dir?   Albert ARIBAUD
• [U-Boot] [PATCH] kbuild: drop clang-specific extra warnings   Albert ARIBAUD
• [U-Boot] [v2 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards   Heiko Schocher
• [U-Boot] [v2 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header   Heiko Schocher
• [U-Boot] [v2 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Heiko Schocher
• [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()   Heiko Schocher
• [U-Boot] [v2 PATCH 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45   Heiko Schocher
• [U-Boot] [v2 PATCH 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define   Heiko Schocher
• [U-Boot] [v2 PATCH 06/12] spl, nand: add option to boot raw u-boot.bin image only   Heiko Schocher
• [U-Boot] [v2 PATCH 07/12] mtd: atmel_nand: add missign include   Heiko Schocher
• [U-Boot] [v2 PATCH 08/12] spl, nand, atmel_nand: add erase one block function   Heiko Schocher
• [U-Boot] [v2 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic   Heiko Schocher
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Heiko Schocher
• [U-Boot] [v2 PATCH 11/12] arm, at91, spl: add spl support for the taurus board   Heiko Schocher
• [U-Boot] [v2 PATCH 12/12] arm, spl, at91: add spl support for the corvus board   Heiko Schocher
• [U-Boot] [PATCH] sunxi: Ippo_q8h_v5: fix config name typo   Albert ARIBAUD
• [U-Boot] [PATCH] SMDK2410: convert to generic board   David Müller
• [U-Boot] [PATCH] arm: socfpga: Add DT support for SoCFPGA   Stefan Roese
• [U-Boot] [PATCH v2] arm: socfpga: Add I2C support to SoCFPGA   Stefan Roese
• [U-Boot] [U-Boot, v2, 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Hans de Goede
• [U-Boot] [PATCH v2] arm: socfpga: Add I2C support to SoCFPGA   Heiko Schocher
• [U-Boot] [PATCH] arm, at91: generate boot.bin file for all all atmel SoC   Heiko Schocher
• [U-Boot] [PATCH v3] board: wandboard: add usb storage   Stefano Babic
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [PATCH V8] ARM: mx6: Add support for Kosagi Novena   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Add Seiko WVGA panel support   Stefano Babic
• [U-Boot] [PATCH] mxs: add watchdog   Stefano Babic
• [U-Boot] [PATCH] Remove unused files   Masahiro Yamada
• [U-Boot] [PATCH] ppc/arm: remove remainders of dead boards in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Add I2C support to SoCFPGA   Marek Vasut
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Hans de Goede
• [U-Boot] [ 1/2] tqma6: fix sf detection   Stefano Babic
• [U-Boot] [ 2/2] tqma6: fix typo in header guard define   Stefano Babic
• [U-Boot] [PATCH 1/3] ot1200: add feature pads   Stefano Babic
• [U-Boot] [PATCH 2/3] ot1200: add support for usdhc4   Stefano Babic
• [U-Boot] [PATCH 3/3] ot1200: rework card detect for eMMC   Stefano Babic
• [U-Boot] [PATCH] novena: Fix ethernet PHY reset sequence   Stefano Babic
• [U-Boot] [U-boot] [Patch] net: phy: marvell: add errata w/a for 88E151* chips   Ivan Khoronzhuk
• [U-Boot] [PATCH] arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register name   Stefano Babic
• [U-Boot] [PATCH v2] imximage: Fix the bootdata.size calculation   Ye.Li
• [U-Boot] [PATCH v2 1/5] imx: gpt: Add High frequency clock source support for GPT   Stefano Babic
• [U-Boot] Need FTP client support in U-Boot   Mythri, Madhukar (Artesyn)
• [U-Boot] [PATCH] mtd: nand: mxs: Add ECC geometry for 2048b/112b NAND   Stefano Babic
• [U-Boot] [PATCH v2 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Stefano Babic
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Bo Shen
• [U-Boot] [PATCH v2] imx: mx6 sabreauto: Add board support for USB EHCI   Stefano Babic
• [U-Boot] [PATCH v3 1/5] imx: gpt: Add High frequency clock source support for GPT   Ye.Li
• [U-Boot] [PATCH v3 2/5] imx: mx6sl: Add perclk_clk_sel bit define in CCM   Ye.Li
• [U-Boot] [PATCH v3 3/5] imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source   Ye.Li
• [U-Boot] [PATCH v3 4/5] imx: mx6sl: Set the preclk clock source to OSC 24Mhz   Ye.Li
• [U-Boot] [PATCH v3 5/5] imx: mx6: Enable high frequency clock source for GPT   Ye.Li
• [U-Boot] [PATCH v3 1/2] imx: mx6sl: Add IOMUX setting for USDHC1-3   Ye.Li
• [U-Boot] [PATCH v3 2/2] imx: mx6slevk: Add support for USDHC1 and USDHC3 slots   Ye.Li
• [U-Boot] [PATCH 2/4] imx: mx6slevk: Add PMIC Pfuze support   Stefano Babic
• [U-Boot] [PATCH v2 3/3] video: speedup writing strings to fb console   Stefano Babic
• [U-Boot] [PATCH v3] imx: mx6 sabreauto: Add board support for USB EHCI   Ye.Li
• [U-Boot] [PATCH v2 1/3] arm: arch-mx6: typo fixes in crm_regs.h   Stefano Babic
• [U-Boot] [PATCH v2 2/3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Stefano Babic
• [U-Boot] [PATCH] arm, imx, spi: detect spi flash again on aristainetos board   Heiko Schocher
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Pavel Machek
• [U-Boot] [PATCH] arm: fix a typo of instruction operand   Jethro Hsu
• [U-Boot] [U-boot] [Patch] net: phy: marvell: add errata w/a for 88E151* chips   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Stefan Roese
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Heiko Schocher
• [U-Boot] [PATCH v2] arm, imx, spi: detect spi flash again on aristainetos board   Heiko Schocher
• [U-Boot] [PATCH] Remove the CREDITS file   Wolfgang Denk
• [U-Boot] Need FTP client support in U-Boot   Wolfgang Denk
• [U-Boot] [PATCH] Remove unused files   Wolfgang Denk
• [U-Boot] u-boot 1.1.6 binary file   Wolfgang Denk
• [U-Boot] [PATCH v3 0/3] spi, sf: add mtdparts feature to spi and sf commands   Heiko Schocher
• [U-Boot] [PATCH v2 2/3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Fabio Estevam
• [U-Boot] Need FTP client support in U-Boot   Mythri, Madhukar (Artesyn)
• [U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v3] arm: mx6: add support for TBS2910 Matrix ARM miniPC   Soeren Moch
• [U-Boot] [PATCH v2 2/2] exynos5: Use config_distro_bootcmd.h   Minkyu Kang
• [U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h   Minkyu Kang
• [U-Boot] [PATCH 3/3] odroid: adjust gpio calls to dm gpio api   Minkyu Kang
• [U-Boot] [PATCH 2/3] exynos4/4x12: gpio: use gpio extra base addresses   Minkyu Kang
• [U-Boot] [PATCH 1/3] exynos4/4x12: cpu: add extra gpio base addresses   Minkyu Kang
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params.   Ian Campbell
• [U-Boot] [PATCH] arm: mxs: Define bootscript env variable on m28evk   Stefano Babic
• [U-Boot] [PATCH v3 0/2] arm: marvell: sheevaplug: add FDT and fixes MTDPARTS   drEagle
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Jagan Teki
• [U-Boot] [BUG] kwimage v0 broken   drEagle
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] Need FTP client support in U-Boot   Wolfgang Denk
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params.   Wolfgang Denk
• [U-Boot] [PATCH v2] twl4030: VMMC2 3.2V enable on MMC init   Pantelis Antoniou
• [U-Boot] [PATCH] omap_hsmmc: Allow for board-specific MMC power init   Pantelis Antoniou
• [U-Boot] Inconsistency between $filesize and commands which accept numeric params.   Ian Campbell
• [U-Boot] [PATCH v4] powerpc/mpc85xx: modify erratum A007186   York Sun
• [U-Boot] buildman: using wrong libgcc.a   Steve Rae
• [U-Boot] [PATCH] arm: fix a typo of instruction operand   Albert ARIBAUD
• [U-Boot] [U-boot] [Patch v2] net: phy: marvell: add errata w/a for 88E151* chips   Ivan Khoronzhuk
• [U-Boot] [U-boot] [Patch v2] net: phy: marvell: add errata w/a for 88E151* chips   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Marek Vasut
• [U-Boot] [PATCH v4] zynq: Use GPLed files for SPL   Soren Brinkmann
• [U-Boot] [BUG] kwimage v0 broken   Prafulla Wadaskar
• [U-Boot] buildman: using wrong libgcc.a   Steve Rae
• [U-Boot] [PATCH] novena: Add MAINTAINERS file   Fabio Estevam
• [U-Boot] buildman: using wrong libgcc.a   Jeroen Hofstee
• [U-Boot] [PATCH] novena: Add MAINTAINERS file   Marek Vasut
• [U-Boot] [PATCH v2 3/3] video: speedup writing strings to fb console   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] tools/kwbimage.c: fix build on darwin   Anatolij Gustschin
• [U-Boot] [PATCH v2] tools/kwbimage: Fix compilation warning   Anatolij Gustschin
• [U-Boot] [v2 PATCH 08/12] spl, nand, atmel_nand: add erase one block function   Scott Wood
• [U-Boot] [v2 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic   Scott Wood
• [U-Boot] [PATCH 2/2] tools/kwbimage.c: fix build on darwin   Anatolij Gustschin
• [U-Boot] [PATCH v2] twl4030: VMMC2 3.2V enable on MMC init   Anatolij Gustschin
• [U-Boot] [PATCH] Remove unused files   Anatolij Gustschin
• [U-Boot] [PATCH] ppc/arm: remove remainders of dead boards in Kconfig   Anatolij Gustschin
• [U-Boot] [PATCH] novena: Add MAINTAINERS file   Anatolij Gustschin
• [U-Boot] [PATCH] Remove the CREDITS file   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format   Gerald Kerma
• [U-Boot] [BUG] kwimage v0 broken   drEagle
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Simon Glass
• [U-Boot] [PATCH v4] powerpc/mpc85xx: modify erratum A007186   qiang.zhao at freescale.com
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Bo Shen
• [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()   Bo Shen
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Bo Shen
• [U-Boot] [PATCH v2] kbuild: do not hide clang warnings during build with W=1   Masahiro Yamada
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Simon Glass
• [U-Boot] [PATCH v3 0/6] dm: Introduce driver model for sunxi   Simon Glass
• [U-Boot] [PATCH v3 1/6] dm: sunxi: dts: Add sun7i device tree files   Simon Glass
• [U-Boot] [PATCH v3 2/6] dm: sunxi: Add a new config for an FDT-based pcDuino3   Simon Glass
• [U-Boot] [PATCH v3 3/6] dm: sunxi: Add pinmux functions which take a bank parameter   Simon Glass
• [U-Boot] [PATCH v3 4/6] dm: sunxi: Make sure that GPIOs are requested   Simon Glass
• [U-Boot] [PATCH v3 5/6] dm: sunxi: Modify the GPIO driver to support driver model   Simon Glass
• [U-Boot] [PATCH v3 6/6] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH 02/10] Add some standard headers external code might need   Simon Glass
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Simon Glass
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Peng Fan
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH] powerpc/t208xqds: VID support   ying.zhang at freescale.com
• [U-Boot] verified boot of beaglebone black   Simon Glass
• [U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format   Prafulla Wadaskar
• [U-Boot] DECLARE_GLOBAL_DATA_PTR : move from source to Makefile   Kevin Du Huanpeng
• [U-Boot] verified boot of beaglebone black   Srinivasan S
• [U-Boot] [PATCH 0/2] Follow-up patches for commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs)   Masahiro Yamada
• [U-Boot] [PATCH 1/2] kconfig: arm: select CPU_V7 for some new boards   Masahiro Yamada
• [U-Boot] [PATCH 2/2] kconfig: arm: move "armv8" define to arch/arm/Kconfig   Masahiro Yamada
• [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()   Heiko Schocher
• [U-Boot] [PATCH] arm: ls102xa: Update PCIe dts node status   Minghuan Lian
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Heiko Schocher
• [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Wolfgang Denk
• [U-Boot] [PATCH] blackfin: rename blackfin i2c driver to adi   Heiko Schocher
• [U-Boot] [BUG] kwimage v0 broken   Stefan Roese
• [U-Boot] [PATCH 3/3] ARM: kwimage: fix v0 format   Stefan Roese
• [U-Boot] verified boot of beaglebone black   Jagan Teki
• [U-Boot] [PATCH 1/2] kconfig: arm: select CPU_V7 for some new boards   Stefan Roese
• [U-Boot] [PATCH] arm: rmobile: r8a7790: Update initialize L2 cache   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: lager: Fix change of the CPU frequency   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Jagan Teki
• [U-Boot] [PATCH] blackfin: rename blackfin i2c driver to adi   Scott Jiang
• [U-Boot] [PATCH 1/6] arm: rmobile: lager: Add external RAM boot   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/6] arm: rmobile: koelsch: Add external RAM boot   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/6] arm: rmobile: alt: Add external RAM boot   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/6] arm: rmobile: lager: Remove RAM address initialization   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 5/6] arm: rmobile: koelsch: Remove RAM address initialization   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 6/6] arm: rmobile: alt: Remove RAM address initialization   Nobuhiro Iwamatsu
• [U-Boot] DECLARE_GLOBAL_DATA_PTR : move from source to Makefile   Masahiro Yamada
• [U-Boot] [PATCH 1/3] arm: rmobile: alt: Fix typo of SCIF id   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] arm: rmobile: alt: Add support USB and USB commands   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] arm: rmobile: alt: Add VFAT filesystem support   Nobuhiro Iwamatsu
• [U-Boot] [v3 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards   Heiko Schocher
• [U-Boot] [v3 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header   Heiko Schocher
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Heiko Schocher
• [U-Boot] [v3 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()   Heiko Schocher
• [U-Boot] [v3 PATCH 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45   Heiko Schocher
• [U-Boot] [v3 PATCH 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define   Heiko Schocher
• [U-Boot] [v3 PATCH 06/12] spl, nand: add option to boot raw u-boot.bin image only   Heiko Schocher
• [U-Boot] [v3 PATCH 07/12] mtd: atmel_nand: add missign include   Heiko Schocher
• [U-Boot] [v3 PATCH 08/12] spl, nand, atmel_nand: add erase one block function   Heiko Schocher
• [U-Boot] [v3 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic   Heiko Schocher
• [U-Boot] [v3 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support   Heiko Schocher
• [U-Boot] [v3 PATCH 11/12] arm, at91, spl: add spl support for the taurus board   Heiko Schocher
• [U-Boot] [v3 PATCH 12/12] arm, spl, at91: add spl support for the corvus board   Heiko Schocher
• [U-Boot] [v3 PATCH 07/12] mtd: atmel_nand: add missign include   Bo Shen
• [U-Boot] DECLARE_GLOBAL_DATA_PTR : move from source to Makefile   Kevin Du Huanpeng
• [U-Boot] [PATCH v4 05/29] dm: spi: Add a uclass for SPI   Stefan Roese
• [U-Boot] [v3 PATCH 07/12] mtd: atmel_nand: add missign include   Heiko Schocher
• [U-Boot] Flat Image Tree and boot arguments   Weiß Christoph
• [U-Boot] [PATCH] blackfin: rename blackfin i2c driver to adi   Heiko Schocher
• [U-Boot] Need FTP client support in U-Boot   Antony Pavlov
• [U-Boot] Need FTP client support in U-Boot   Antony Pavlov
• [U-Boot] [PATCH 1/3] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH 2/3] Exynos5800: Add support for Exynos5800   Hyungwon Hwang
• [U-Boot] [PATCH 3/3] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH 1/3] exynos5: fix GPIO information of exynos5420   Lukasz Majewski
• [U-Boot] [PATCH v2 0/6] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v3 0/7] Addition of new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v3 1/7] Exynos5800: Introduce new proid for Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v3 2/7] Exynos5800: Add DTS for new board Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v3 3/7] Config: Exynos5800: Enable build for Peach-Pi   Akshay Saraswat
• [U-Boot] [PATCH v3 4/7] DMC: Exynos5: Enable update mode for DREX controller   Akshay Saraswat
• [U-Boot] [PATCH v3 5/7] Config: Exynos5420: Refactor SDRAM Bank and Size   Akshay Saraswat
• [U-Boot] [PATCH v3 6/7] Exynos5: ddr3: Choose between single or double channel config   Akshay Saraswat
• [U-Boot] [PATCH v3 7/7] Peach-Pi: Use the enhanced usb_copy() prototype   Akshay Saraswat
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Marek Vasut
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Hans de Goede
• [U-Boot] [PATCH 2/3] Exynos5422: Add support for Exynos5422   Lukasz Majewski
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Jagan Teki
• [U-Boot] [PATCH] arm: socfpga: Add example config entry for EPCS/EPCQ SPI   Marek Vasut
• [U-Boot] [PATCH 2/3] Exynos5422: Add support for Exynos5422   Hyungwon Hwang
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Hans de Goede
• [U-Boot] [PATCH] mtd, cfi, ubi: add missing writebufsize initialization   Heiko Schocher
• [U-Boot] [PATCH] mtd, cfi, ubi: add missing writebufsize initialization   Stefan Roese
• [U-Boot] [PATCH] mtd, cfi, ubi: add missing writebufsize initialization   Heiko Schocher
• [U-Boot] [PATCH 3/3] Odroid-XU3: Add support for Odroid-XU3   Lukasz Majewski
• [U-Boot] [PATCH v2 6/6] dm: sunxi: Add support for serial using driver model   Ian Campbell
• [U-Boot] [PATCH 2/3] Exynos5422: Add support for Exynos5422   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] Config: Exynos5800: Enable build for Peach-Pi   Wolfgang Denk
• [U-Boot] mtd, ubi: errormessage handling   Heiko Schocher
• [U-Boot] [PATCH v2] powerpc/t208xqds: VID support   ying.zhang at freescale.com
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Heiko Schocher
• [U-Boot] [PATCH v2] mtd, cfi, ubi: add missing writebufsize initialization   Heiko Schocher
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Jagan Teki
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Jagan Teki
• [U-Boot] [v3 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header   Jagan Teki
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Wolfgang Denk
• [U-Boot] [PATCH] imx:mx6sxsabresd fix pfuz probe failed   Fabio Estevam
• [U-Boot] [PATCH 0/4] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH 1/4] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH 2/4] Exynos5800: Add support for Exynos5800   Hyungwon Hwang
• [U-Boot] [PATCH 3/4] odroid: make some macros common   Hyungwon Hwang
• [U-Boot] [PATCH 4/4] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH v2 0/4] Adds support for Exynos5422 odroid xu3 board   Hyungwon Hwang
• [U-Boot] [PATCH v2 1/4] exynos5: fix GPIO information of exynos5420   Hyungwon Hwang
• [U-Boot] [PATCH v2 2/4] Exynos5800: Add support for Exynos5800   Hyungwon Hwang
• [U-Boot] [PATCH v2 3/4] odroid: make some macros common   Hyungwon Hwang
• [U-Boot] [PATCH v2 4/4] Odroid-XU3: Add support for Odroid-XU3   Hyungwon Hwang
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Masahiro Yamada
• [U-Boot] [v3 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board   Heiko Schocher
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Heiko Schocher
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Jagan Teki
• [U-Boot] [PATCH] MAINTAINERS: add me as a maintainer of MTD   Stefan Roese
• [U-Boot] [PATCH] MAINTAINERS: CFI flash maintainership only includes the CFI related files   Stefan Roese
• [U-Boot] [PATCH] MAINTAINERS: CFI flash maintainership only includes the CFI related files   Jagan Teki
• [U-Boot] [PATCH v3 0/6] dm: Introduce driver model for sunxi   Hans de Goede
• [U-Boot] [PATCH v2 06/10] ARM: sunxi-mmc: Add mmc support for sun6i / A31   Pantelis Antoniou
• [U-Boot] [PATCH] fs: make it possible to read the filesystem UUID   Christian Gmeiner
• [U-Boot] [off-topic] LinuxCon/ELCE 2014 presentation on "Redundant booting with U-Boot"   James Chargin
• [U-Boot] [PATCH v3 0/6] dm: Introduce driver model for sunxi   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Request card detect gpio   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Request USB vbus gpio   Hans de Goede
• [U-Boot] [off-topic] LinuxCon/ELCE 2014 presentation on "Redundant booting with U-Boot"   Jagan Teki
• [U-Boot] [off-topic] LinuxCon/ELCE 2014 presentation on "Redundant booting with U-Boot"   James Chargin
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH v5] fs: fat/ext4/sandbox - Deal with files greater than 2GB   Suriyan Ramasami