[U-Boot] [PATCH] ot1200: fix sf detection

Christian Gmeiner christian.gmeiner at gmail.com
Wed Oct 22 11:29:51 CEST 2014


Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way
to define a GPIO line, which can be used to force CS high
across multiple transactions. In order to fix sf detection
change board code to make use of board_spi_cs_gpio(..).

Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
---
 board/bachmann/ot1200/ot1200.c | 5 +++++
 include/configs/ot1200.h       | 2 +-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index 0d5ede5..2962e0c 100644
--- a/board/bachmann/ot1200/ot1200.c
+++ b/board/bachmann/ot1200/ot1200.c
@@ -98,6 +98,11 @@ static void setup_iomux_spi(void)
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
 }
 
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	return (bus == 2 && cs == 0) ? (IMX_GPIO_NR(1, 3)) : -1;
+}
+
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 071880f..d7696bd 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -47,7 +47,7 @@
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  2
-#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(1, 3)<<8))
+#define CONFIG_SF_DEFAULT_CS   0
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 
-- 
1.9.3



More information about the U-Boot mailing list