[U-Boot] [PATCH 4/6] DMC: Exynos5: Enable update mode for DREX controller

[Akshay Saraswat]

From: Alim Akhtar <alim.akhtar at samsung.com>

As per Exynos5800 UM ver 0.00 section 17.13.2.1
CONCONTROL register bit 3 [update_mode], Exynos5800 does not
support the PHY initiated update. And it is recommanded to
set this field to 1'b1 during initialization. This patch sets this bit.
Applying MC-initiated mode makes DDL tracking ON, that helps in
compensate MIF voltage variation.

Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
 arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 19 +++++++++++++++++++
 arch/arm/include/asm/arch-exynos/dmc.h    |  1 +
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index b86dd2d..4d73b45 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -832,6 +832,25 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
 	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
 
+	/*
+	 * As per Exynos5800 UM ver 0.00 section 17.13.2.1
+	 * CONCONTROL register bit 3 [update_mode], Exynos5800 does not
+	 * support the PHY initiated update. And it is recommended to set
+	 * this field to 1'b1 during initialization
+	 *
+	 * When we apply PHY-initiated mode, DLL lock value is determined
+	 * once at DMC init time and not updated later when we change the MIF
+	 * voltage based on ASV group in kernel. Applying MC-initiated mode
+	 * makes sure that DLL tracing is ON so that silicon is able to
+	 * compensate the voltage variation.
+	 */
+	val = readl(&drex0->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val , &drex0->concontrol);
+	val = readl(&drex1->concontrol);
+	val |= CONCONTROL_UPDATE_MODE;
+	writel(val , &drex1->concontrol);
+
 	return 0;
 }
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h
index ec3f9b6..4990a1a 100644
--- a/arch/arm/include/asm/arch-exynos/dmc.h
+++ b/arch/arm/include/asm/arch-exynos/dmc.h
@@ -450,6 +450,7 @@ enum mem_manuf {
 #define CONCONTROL_RD_FETCH_SHIFT	12
 #define CONCONTROL_RD_FETCH_MASK	(0x7 << CONCONTROL_RD_FETCH_SHIFT)
 #define CONCONTROL_AREF_EN_SHIFT	5
+#define CONCONTROL_UPDATE_MODE		(1 << 3)
 
 /* PRECHCONFIG register field */
 #define PRECHCONFIG_TP_CNT_SHIFT	24
-- 
1.9.1