[U-Boot] [PATCH v3 3/3] arm: odroid: usb: add support for usb host including ethernet
Suriyan Ramasami
suriyan.r at gmail.com
Thu Oct 30 05:40:42 CET 2014
Hello Jaehoon Chung,
On Wed, Oct 29, 2014 at 6:17 PM, Jaehoon Chung <jh80.chung at samsung.com> wrote:
> On 10/30/2014 01:22 AM, Suriyan Ramasami wrote:
>> This change adds support for enabling the USB host features of the board.
>> This includes the USB3503A hub and the SMC LAN9730 ethernet controller
>> as well.
>>
>> Signed-off-by: Suriyan Ramasami <suriyan.r at gmail.com>
>>
>> ---
>>
>> Changes in v3:
>> * removed set_usb_ethaddr() and related code as the GUID registers do not
>> seem to be documented anywhere. This is sad, as this mechanism allows
>> for each Odroid to boot up with the same MAC address every time, but no
>> two odroids shall have the same MAC address on boot. This ensures multiple
>> odroids in the same LAN to come up without conflicting MAC addresses.
>> * Minkyu - Do not mix cpu_is... and proid_is...
>>
>> Changes in v2:
>> * Jaehoon - Split power.[ch] as a separate patch
>> * Removed an unneeded header file from ehci-exynos.c
>> * Jaehoon - Fix indentation in the dts file
>>
>> Changes in v1:
>> * First try
>>
>> arch/arm/dts/exynos4412-odroid.dts | 11 +++++++
>> arch/arm/include/asm/arch-exynos/ehci.h | 13 ++++++++
>> board/samsung/odroid/odroid.c | 32 +++++++++++++++++++
>> drivers/usb/host/ehci-exynos.c | 55 ++++++++++++++++++++++++++++-----
>> include/configs/odroid.h | 13 ++++++++
>> 5 files changed, 116 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
>> index 4c5e2b3..2df1801 100644
>> --- a/arch/arm/dts/exynos4412-odroid.dts
>> +++ b/arch/arm/dts/exynos4412-odroid.dts
>> @@ -67,4 +67,15 @@
>> div = <0x3>;
>> index = <4>;
>> };
>> +
>> + ehci at 12580000 {
>> + compatible = "samsung,exynos-ehci";
>> + reg = <0x12580000 0x100>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + phy {
>> + compatible = "samsung,exynos-usb-phy";
>> + reg = <0x125B0000 0x100>;
>> + };
>> + };
>> };
>> diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h
>> index d2d70bd..3800fa9 100644
>> --- a/arch/arm/include/asm/arch-exynos/ehci.h
>> +++ b/arch/arm/include/asm/arch-exynos/ehci.h
>> @@ -12,6 +12,13 @@
>>
>> #define CLK_24MHZ 5
>>
>> +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
>> +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
>> +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
>> +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
>> +#define RSTCON_HOSTPHY_SWRST (0xf << 3)
>> +#define RSTCON_SWRST (0x1 << 0)
>> +
>> #define HOST_CTRL0_PHYSWRSTALL (1 << 31)
>> #define HOST_CTRL0_COMMONON_N (1 << 9)
>> #define HOST_CTRL0_SIDDQ (1 << 6)
>> @@ -61,6 +68,12 @@ struct exynos_usb_phy {
>> unsigned int usbotgtune;
>> };
>>
>> +struct exynos4412_usb_phy {
>> + unsigned int usbphyctrl;
>> + unsigned int usbphyclk;
>> + unsigned int usbphyrstcon;
>> +};
>> +
>> /* Switch on the VBUS power. */
>> int board_usb_vbus_init(void);
>>
>> diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
>> index 5edb250..d671f13 100644
>> --- a/board/samsung/odroid/odroid.c
>> +++ b/board/samsung/odroid/odroid.c
>> @@ -453,9 +453,41 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
>> .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
>> .usb_flags = PHY0_SLEEP,
>> };
>> +#endif
>> +
>> +#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
>>
>> int board_usb_init(int index, enum usb_init_type init)
>> {
>> +#ifdef CONFIG_CMD_USB
>> + struct pmic *p_pmic;
>> +
>> + /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
>> + /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
>> + if (gd->board_type == ODROID_TYPE_U3)
>> + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
>> + else
>> + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
>> +
>> + /* Disconnect, Reset, Connect */
>> + gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X35, 0);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X35, 1);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X34, 1);
>> +
>> + /* Power off and on BUCK8 for LAN9730 */
>> + debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
>> +
>> + p_pmic = pmic_get("MAX77686_PMIC");
>> + if (p_pmic && !pmic_probe(p_pmic)) {
>> + max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF);
>> + max77686_set_buck_voltage(p_pmic, 8, 750000);
>> + max77686_set_buck_voltage(p_pmic, 8, 3300000);
>> + max77686_set_buck_mode(p_pmic, 8, OPMODE_ON);
>> + }
>> +
>> +#endif
>> +
>> debug("USB_udc_probe\n");
>> return s3c_udc_probe(&s5pc210_otg_data);
>> }
>> diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
>> index edd91a8..6fdbf57 100644
>> --- a/drivers/usb/host/ehci-exynos.c
>> +++ b/drivers/usb/host/ehci-exynos.c
>> @@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
>> }
>> #endif
>>
>> -/* Setup the EHCI host controller. */
>> -static void setup_usb_phy(struct exynos_usb_phy *usb)
>> +static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
>> {
>> u32 hsic_ctrl;
>>
>> - set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
>> -
>> - set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
>> -
>> clrbits_le32(&usb->usbphyctrl0,
>> HOST_CTRL0_FSEL_MASK |
>> HOST_CTRL0_COMMONON_N |
>> @@ -150,8 +145,34 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
>> EHCICTRL_ENAINCR16);
>> }
>>
>> -/* Reset the EHCI host controller. */
>> -static void reset_usb_phy(struct exynos_usb_phy *usb)
>> +static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
>> +{
>> + writel(CLK_24MHZ, &usb->usbphyclk);
>> +
>> + clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
>> + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
>> + PHYPWR_NORMAL_MASK_PHY0));
>> +
>> + setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
>> + udelay(10);
>> + clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
>> +}
>> +
>> +static void setup_usb_phy(struct exynos_usb_phy *usb)
>> +{
>
> Well, I didn't know exactly. but i think this is something strange.
> is it always bypassed the "struct exynos_usb_phy"?
>
> And don't need to modify the below code into exynos_usb_parse_dt()?
>
> /*
> * Get the base address for usbphy from the device node
> */
> exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
> "reg");
> if (exynos->usb == NULL) {
> debug("Can't get the usbphy register address\n");
> return -ENXIO;
> }
Well, its a pointer and its cast to (exynos4412_usb_phy *) later on
(in function setup_usb_phy()).
If this cast looks funky, we could change exynos->usb to be of type
void * and cast it to appropriate (exynos4_usb_phy *) or
(exynos4412_us_phy *) as needed.
I do not know which is preferable. As far as I see it, its a pointer,
and depending on the SoC we cast it differently.
Please let me know if you have any ideas of how you want to change it
for it to be less confusing (if that is indeed the case).
Thanks
- Suriyan
>
> Best Regards,
> Jaehoon Chung
>
>> + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
>> +
>> + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
>> +
>> + if (cpu_is_exynos5())
>> + exynos5_setup_usb_phy(usb);
>> + else if (cpu_is_exynos4())
>> + if (proid_is_exynos4412())
>> + exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
>> + usb);
>> +}
>> +
>> +static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
>> {
>> u32 hsic_ctrl;
>>
>> @@ -171,6 +192,24 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
>>
>> setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
>> setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
>> +}
>> +
>> +static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
>> +{
>> + setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
>> + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
>> + PHYPWR_NORMAL_MASK_PHY0));
>> +}
>> +
>> +/* Reset the EHCI host controller. */
>> +static void reset_usb_phy(struct exynos_usb_phy *usb)
>> +{
>> + if (cpu_is_exynos5())
>> + exynos5_reset_usb_phy(usb);
>> + else if (cpu_is_exynos4())
>> + if (proid_is_exynos4412())
>> + exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
>> + usb);
>>
>> set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
>> }
>> diff --git a/include/configs/odroid.h b/include/configs/odroid.h
>> index b928af8..807e96b 100644
>> --- a/include/configs/odroid.h
>> +++ b/include/configs/odroid.h
>> @@ -198,6 +198,19 @@
>>
>> #define CONFIG_CMD_GPIO
>>
>> +/* USB */
>> +#define CONFIG_CMD_USB
>> +#define CONFIG_USB_EHCI
>> +#define CONFIG_USB_EHCI_EXYNOS
>> +#define CONFIG_USB_STORAGE
>> +
>> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
>> +#define CONFIG_CMD_NET
>> +#define CONFIG_CMD_PING
>> +#define CONFIG_CMD_DHCP
>> +#define CONFIG_USB_HOST_ETHER
>> +#define CONFIG_USB_ETHER_SMSC95XX
>> +
>> /*
>> * Supported Odroid boards: X3, U3
>> * TODO: Add Odroid X support
>>
>
More information about the U-Boot
mailing list