[U-Boot] [PATCH 3/3] omap3: cm-t35: remove enable_gpmc_cs_config()

[Igor Grinberg]

The gpmc_init() function already calls enable_gpmc_cs_config() for chip
select 0. Although the bus width is configured for 16 bit, it gets
reconfigured correctly in the omap_gpmc driver later.

Remove the enable_gpmc_cs_config() function call and the associated
gpmc_nand_config[] array.

Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
---
 board/compulab/cm_t35/cm_t35.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 6728ac1..f8265e1 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -53,16 +53,6 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
 	0
 };
 
-static u32 gpmc_nand_config[GPMC_MAX_REG] = {
-	M_NAND_GPMC_CONFIG1,
-	M_NAND_GPMC_CONFIG2,
-	M_NAND_GPMC_CONFIG3,
-	M_NAND_GPMC_CONFIG4,
-	M_NAND_GPMC_CONFIG5,
-	M_NAND_GPMC_CONFIG6,
-	0,
-};
-
 #ifdef CONFIG_LCD
 #ifdef CONFIG_CMD_NAND
 static int splash_load_from_nand(u32 bmp_load_addr)
@@ -148,9 +138,6 @@ int board_init(void)
 {
 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
 
-	enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0],
-			      CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M);
-
 	/* board id for Linux */
 	if (get_cpu_family() == CPU_OMAP34XX)
 		gd->bd->bi_arch_number = MACH_TYPE_CM_T35;
-- 
2.0.4