[U-Boot] Upstream uboot and Arndale 5250 support

[Paolo Pisati]

that's weird, because i don't have bootz:

U-Boot 2014.10-rc3 (Oct 08 2014 - 11:34:33) for ARNDALE

CPU:    Exynos5250 at 1000MHz

Board: Arndale
I2C:   i2c_init: failed to init bus 0 for speed = 100000
ready
DRAM:  2 GiB
trace: copying 00086db4 bytes of early data from 50000000 to beff0000
trace: enabled
WARNING: Caches not enabled
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
dwmci_send_cmd: DATA ERROR!
i2c_init: failed to init bus 0 for speed = 100000
In:    serial
Out:   serial
Err:   serial
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
ARNDALE # help bootz
Unknown command 'bootz' - try 'help' without arguments for list of all
known commands

ARNDALE #

are you using a patched u-boot?

i'm using the default arndale_defconfig.

anyhow, can i have your full working config?
i'm starting to feel i'm chasing ghosts here.

On Wed, Oct 8, 2014 at 10:00 AM, Guillaume Gardet
<guillaume.gardet at free.fr> wrote:
> I used the following values with 2014.10-rc2:
> kerneladdr=0x44000000
> ramdiskaddr=0x45000000
> fdtaddr=0x4c000000
>
> But I used a zImage. If you use a uImage, you need to modify the kernel load
> addr.
>
> Guillaume
>
>
> Le 07/10/2014 17:02, Paolo Pisati a écrit :
>
>> those are the addresses suggested by u-boot and yes, i already tried
>> moving stuff around but it didn't fix it: what's the working config
>> with your board? u-boot version?
>>
>> On Tue, Oct 7, 2014 at 4:34 PM, Guillaume Gardet
>> <guillaume.gardet at free.fr> wrote:
>>>
>>> Hi,
>>>
>>> Le 07/10/2014 14:58, Paolo Pisati a écrit :
>>>
>>>> Hi,
>>>>
>>>> i've been trying to update the u-boot on my board (sd booting), from the
>>>> Linaro
>>>> one (2012.10) to a v2014.X, but so far had no luck:
>>>>
>>>> make arndale_config
>>>> export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
>>>> make
>>>>
>>>> ...
>>>>
>>>> dd if=arndale-bl1.bin of=/dev/sdc bs=512 skip=1
>>>> dd if=arndale-spl.bin of=/dev/sdc bs=512 skip=17
>>>> dd if=./u-boot-dtb.bin of=/dev/sdc bs=512 skip=49
>>>>
>>>> ...
>>>>
>>>> u-boot 3.10rc3 (same happens with v2014.07 or 2014.04):
>>>>
>>>> U-Boot 2014.10-rc3 (Oct 07 2014 - 13:26:48) for ARNDALE
>>>>
>>>> CPU:    Exynos5250 at 1000MHz
>>>>
>>>> Board: Arndale
>>>> I2C:   i2c_init: failed to init bus 0 for speed = 100000
>>>> ready
>>>> DRAM:  2 GiB
>>>> trace: copying 00086db4 bytes of early data from 50000000 to beff0000
>>>> trace: enabled
>>>> WARNING: Caches not enabled
>>>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>>>> dwmci_send_cmd: DATA ERROR!
>>>> i2c_init: failed to init bus 0 for speed = 100000
>>>> In:    serial
>>>> Out:   serial
>>>> Err:   serial
>>>> Net:   Net Initialization Skipped
>>>> No ethernet found.
>>>> Hit any key to stop autoboot:  0
>>>> ARNDALE # printenv
>>>> baudrate=115200
>>>> bootargs=console=ttySAC2,115200n8 root=/dev/mmcblk1p1 rw rootwait debug
>>>> earlyprintk
>>>> bootcmd=run bootcmd_ubuntu
>>>> bootcmd_ubuntu=run loadk; run loadf; run loadr; bootm ${kernel_addr_r}
>>>> ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}
>>>> bootdelay=3
>>>> fdt_addr_r=0x41000000
>>>> filesize=5b9902
>>>> kernel_addr_r=0x40007000
>>>> loadf=ext2load mmc 1:1 ${fdt_addr_r} /boot/exynos5250-arndale.dtb
>>>> loadk=ext2load mmc 1:1 ${kernel_addr_r} /boot/uImage
>>>> loadr=ext2load mmc 1:1 ${ramdisk_addr_r} /boot/uInitrd
>>>> ramdisk_addr_r=0x42000000
>>>> stderr=serial
>>>> stdin=serial
>>>> stdout=serial
>>>>
>>>> Environment size: 589/16380 bytes
>>>> ARNDALE # run loadk
>>>> 6002946 bytes read in 1117 ms (5.1 MiB/s)
>>>> ARNDALE # bootm ${kernel_addr_r}
>>>> ## Booting kernel from Legacy Image at 40007000 ...
>>>>      Image Name:   kernel 3.16.0-20-generic
>>>>      Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>      Data Size:    6002882 Bytes = 5.7 MiB
>>>>      Load Address: 40008000
>>>>      Entry Point:  40008000
>>>>      Verifying Checksum ... OK
>>>>      Loading Kernel Image ... OK
>>>>
>>>> Starting kernel ...(fake run for tracing)
>>>>
>>>> Starting kernel ...
>>>>
>>>> [stuck here]
>>>
>>>
>>> I faced this problem some times ago. Try to modify kernel, initrd and fdt
>>> addresses.
>>>
>>>
>>> Guillaume
>>>
>>
>>
>



-- 
bye,
p.