[U-Boot] [PATCH 11/14] trats2: dts: adjust gpio numbers after gpio rework

[Przemyslaw Marczak]

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.

Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
---
 arch/arm/dts/exynos4412-trats2.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 3b1e458..60e4515 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -416,7 +416,7 @@
 	sdhci at 12510000 {
 		samsung,bus-width = <8>;
 		samsung,timing = <1 3 3>;
-		pwr-gpios = <&gpio 0xB2 0>;
+		pwr-gpios = <&gpio 0x6a 0>;
 		status = "disabled";
 	};
 
@@ -427,7 +427,7 @@
 	sdhci at 12530000 {
 		samsung,bus-width = <4>;
 		samsung,timing = <1 2 3>;
-		cd-gpios = <&gpio 0x3BC 0>;
+		cd-gpios = <&gpio 0x7a 0>;
 	};
 
 	sdhci at 12540000 {
@@ -437,7 +437,7 @@
 	dwmmc at 12550000 {
 		samsung,bus-width = <8>;
 		samsung,timing = <2 1 0>;
-		pwr-gpios = <&gpio 0xB2 0>;
+		pwr-gpios = <&gpio 0x6a 0>;
 		fifoth_val = <0x203f0040>;
 		bus_hz = <400000000>;
 		div = <0x3>;
-- 
1.9.1