[U-Boot] [PATCH v2 3/3] arm: odroid: usb: add support for usb host including ethernet
Suriyan Ramasami
suriyan.r at gmail.com
Mon Oct 20 19:52:03 CEST 2014
This change adds support for enabling the USB host features of the board.
This includes the USB3503A hub and the SMC LAN9730 ethernet controller
as well.
Credit goes to Tushar Berara for the function set_usb_ethaddr().
Signed-off-by: Suriyan Ramasami <suriyan.r at gmail.com>
---
v2:
* Removed an unneeded header file from ehci-exynos.c
* Fix indentation in the dts file
---
arch/arm/dts/exynos4412-odroid.dts | 11 +++++++
arch/arm/include/asm/arch-exynos/cpu.h | 2 ++
arch/arm/include/asm/arch-exynos/ehci.h | 13 ++++++++
board/samsung/odroid/odroid.c | 55 +++++++++++++++++++++++++++++++++
drivers/usb/host/ehci-exynos.c | 51 +++++++++++++++++++++++++-----
include/configs/odroid.h | 13 ++++++++
6 files changed, 137 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index 24d0bf1..ac5fece 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -67,4 +67,15 @@
div = <0x3>;
index = <4>;
};
+
+ ehci at 12580000 {
+ compatible = "samsung,exynos-ehci";
+ reg = <0x12580000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ phy {
+ compatible = "samsung,exynos-usb-phy";
+ reg = <0x125B0000 0x100>;
+ };
+ };
};
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index ba71714..fda21fb 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -18,6 +18,8 @@
#define EXYNOS4_GPIO_PART3_BASE 0x03860000
#define EXYNOS4_PRO_ID 0x10000000
+#define EXYNOS4_GUID_LOW 0x10000014
+#define EXYNOS4_GUID_HIGH 0x10000018
#define EXYNOS4_SYSREG_BASE 0x10010000
#define EXYNOS4_POWER_BASE 0x10020000
#define EXYNOS4_SWRESET 0x10020400
diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h
index d2d70bd..3800fa9 100644
--- a/arch/arm/include/asm/arch-exynos/ehci.h
+++ b/arch/arm/include/asm/arch-exynos/ehci.h
@@ -12,6 +12,13 @@
#define CLK_24MHZ 5
+#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
+#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
+#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
+#define RSTCON_HOSTPHY_SWRST (0xf << 3)
+#define RSTCON_SWRST (0x1 << 0)
+
#define HOST_CTRL0_PHYSWRSTALL (1 << 31)
#define HOST_CTRL0_COMMONON_N (1 << 9)
#define HOST_CTRL0_SIDDQ (1 << 6)
@@ -61,6 +68,12 @@ struct exynos_usb_phy {
unsigned int usbotgtune;
};
+struct exynos4412_usb_phy {
+ unsigned int usbphyctrl;
+ unsigned int usbphyclk;
+ unsigned int usbphyrstcon;
+};
+
/* Switch on the VBUS power. */
int board_usb_vbus_init(void);
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index 5edb250..6c78b67 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -453,9 +453,64 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
.usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
.usb_flags = PHY0_SLEEP,
};
+#endif
+
+#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
+
+#ifdef CONFIG_CMD_USB
+static void set_usb_ethaddr(void)
+{
+ int i;
+ uchar mac[6];
+ unsigned int guid_high = readl(EXYNOS4_GUID_HIGH);
+ unsigned int guid_low = readl(EXYNOS4_GUID_LOW);
+
+ for (i = 0; i < 2; i++)
+ mac[i] = (guid_high >> (8 * (1 - i))) & 0xFF;
+
+ for (i = 0; i < 4; i++)
+ mac[i+2] = (guid_low >> (8 * (3 - i))) & 0xFF;
+
+ /* mark it as not multicast and outside official 80211 MAC namespace */
+ mac[0] = (mac[0] & ~0x1) | 0x2;
+
+ eth_setenv_enetaddr("ethaddr", mac);
+ eth_setenv_enetaddr("usbethaddr", mac);
+}
+#endif
int board_usb_init(int index, enum usb_init_type init)
{
+#ifdef CONFIG_CMD_USB
+ struct pmic *p_pmic;
+
+ /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
+ /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
+ if (gd->board_type == ODROID_TYPE_U3)
+ gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
+ else
+ gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
+
+ /* Disconnect, Reset, Connect */
+ gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
+ gpio_direction_output(EXYNOS4X12_GPIO_X35, 0);
+ gpio_direction_output(EXYNOS4X12_GPIO_X35, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_X34, 1);
+
+ /* Power off and on BUCK8 for LAN9730 */
+ debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
+
+ p_pmic = pmic_get("MAX77686_PMIC");
+ if (p_pmic && !pmic_probe(p_pmic)) {
+ max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF);
+ max77686_set_buck_voltage(p_pmic, 8, 750000);
+ max77686_set_buck_voltage(p_pmic, 8, 3300000);
+ max77686_set_buck_mode(p_pmic, 8, OPMODE_ON);
+ }
+
+ set_usb_ethaddr();
+#endif
+
debug("USB_udc_probe\n");
return s3c_udc_probe(&s5pc210_otg_data);
}
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index edd91a8..9c479b1 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
}
#endif
-/* Setup the EHCI host controller. */
-static void setup_usb_phy(struct exynos_usb_phy *usb)
+static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
- set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
-
- set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
-
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
@@ -150,8 +145,32 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
EHCICTRL_ENAINCR16);
}
-/* Reset the EHCI host controller. */
-static void reset_usb_phy(struct exynos_usb_phy *usb)
+static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
+{
+ writel(CLK_24MHZ, &usb->usbphyclk);
+
+ clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
+ PHYPWR_NORMAL_MASK_PHY0));
+
+ setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
+ udelay(10);
+ clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
+}
+
+static void setup_usb_phy(struct exynos_usb_phy *usb)
+{
+ set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
+
+ set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
+
+ if (cpu_is_exynos5())
+ exynos5_setup_usb_phy(usb);
+ else if (proid_is_exynos4412())
+ exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)usb);
+}
+
+static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
@@ -171,6 +190,22 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+}
+
+static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
+{
+ setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
+ PHYPWR_NORMAL_MASK_PHY0));
+}
+
+/* Reset the EHCI host controller. */
+static void reset_usb_phy(struct exynos_usb_phy *usb)
+{
+ if (cpu_is_exynos5())
+ exynos5_reset_usb_phy(usb);
+ else if (proid_is_exynos4412())
+ exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)usb);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index b928af8..807e96b 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -198,6 +198,19 @@
#define CONFIG_CMD_GPIO
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
/*
* Supported Odroid boards: X3, U3
* TODO: Add Odroid X support
--
1.9.1
More information about the U-Boot
mailing list