[U-Boot] [PATCH v1 2/2] odroid: usb: add support for usb host including ethernet
Suriyan Ramasami
suriyan.r at gmail.com
Fri Oct 17 21:10:23 CEST 2014
Hello Jaehoon,
On Fri, Oct 17, 2014 at 1:52 AM, Jaehoon Chung <jh80.chung at samsung.com> wrote:
> Hi, Suriyan.
>
> This patch can be separated.
>
OK, I shall separate out the power.c/power.h changes for enabling and
disabling the usbhost phy.
> On 10/02/2014 10:45 PM, Suriyan Ramasami wrote:
>> This change adds support for enabling the USB host features of the board.
>> This includes the USB3503A hub and the SMC LAN9730 ethernet controller
>> as well.
>>
>> Credit goes to Tushar Behera (Linaro) for the function set_usb_ethaddr().
>>
>> Signed-off-by: Suriyan Ramasami <suriyan.r at gmail.com>
>> ---
>> arch/arm/cpu/armv7/exynos/power.c | 26 +++++++++++++++
>> arch/arm/dts/exynos4412-odroid.dts | 11 +++++++
>> arch/arm/include/asm/arch-exynos/cpu.h | 2 ++
>> arch/arm/include/asm/arch-exynos/ehci.h | 13 ++++++++
>> arch/arm/include/asm/arch-exynos/power.h | 7 ++++
>> board/samsung/odroid/odroid.c | 55 ++++++++++++++++++++++++++++++++
>> drivers/usb/host/ehci-exynos.c | 52 +++++++++++++++++++++++++-----
>> include/configs/odroid.h | 13 ++++++++
>> 8 files changed, 171 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
>> index e1ab3d6..6578a07 100644
>> --- a/arch/arm/cpu/armv7/exynos/power.c
>> +++ b/arch/arm/cpu/armv7/exynos/power.c
>> @@ -53,10 +53,36 @@ void exynos5_set_usbhost_phy_ctrl(unsigned int enable)
>> }
>> }
>>
>> +void exynos4412_set_usbhost_phy_ctrl(unsigned int enable)
>> +{
>> + struct exynos4412_power *power =
>> + (struct exynos4412_power *)samsung_get_base_power();
>> +
>> + if (enable) {
>> + /* Enabling USBHOST_PHY */
>> + setbits_le32(&power->usbhost_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + setbits_le32(&power->hsic1_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + setbits_le32(&power->hsic2_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + } else {
>> + /* Disabling USBHOST_PHY */
>> + clrbits_le32(&power->usbhost_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + clrbits_le32(&power->hsic1_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + clrbits_le32(&power->hsic2_phy_control,
>> + POWER_USB_HOST_PHY_CTRL_EN);
>> + }
>> +}
>> +
>> void set_usbhost_phy_ctrl(unsigned int enable)
>> {
>> if (cpu_is_exynos5())
>> exynos5_set_usbhost_phy_ctrl(enable);
>> + else if (proid_is_exynos4412())
>> + exynos4412_set_usbhost_phy_ctrl(enable);
>> }
>>
>> static void exynos5_set_usbdrd_phy_ctrl(unsigned int enable)
>> diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
>> index 24d0bf1..8da8568 100644
>> --- a/arch/arm/dts/exynos4412-odroid.dts
>> +++ b/arch/arm/dts/exynos4412-odroid.dts
>> @@ -67,4 +67,15 @@
>> div = <0x3>;
>> index = <4>;
>> };
>> +
>> + ehci at 12580000 {
>> + compatible = "samsung,exynos-ehci";
>> + reg = <0x12580000 0x100>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + phy {
>> + compatible = "samsung,exynos-usb-phy";
>> + reg = <0x125B0000 0x100>;
>> + };
>> + };
>
> Fix the indentation.
>
Shall do that.
Thanks
- Suriyan
> Best Regards,
> Jaehoon Chung
>
>> };
>> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
>> index ba71714..fda21fb 100644
>> --- a/arch/arm/include/asm/arch-exynos/cpu.h
>> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
>> @@ -18,6 +18,8 @@
>>
>> #define EXYNOS4_GPIO_PART3_BASE 0x03860000
>> #define EXYNOS4_PRO_ID 0x10000000
>> +#define EXYNOS4_GUID_LOW 0x10000014
>> +#define EXYNOS4_GUID_HIGH 0x10000018
>> #define EXYNOS4_SYSREG_BASE 0x10010000
>> #define EXYNOS4_POWER_BASE 0x10020000
>> #define EXYNOS4_SWRESET 0x10020400
>> diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h
>> index d2d70bd..3800fa9 100644
>> --- a/arch/arm/include/asm/arch-exynos/ehci.h
>> +++ b/arch/arm/include/asm/arch-exynos/ehci.h
>> @@ -12,6 +12,13 @@
>>
>> #define CLK_24MHZ 5
>>
>> +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
>> +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
>> +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
>> +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
>> +#define RSTCON_HOSTPHY_SWRST (0xf << 3)
>> +#define RSTCON_SWRST (0x1 << 0)
>> +
>> #define HOST_CTRL0_PHYSWRSTALL (1 << 31)
>> #define HOST_CTRL0_COMMONON_N (1 << 9)
>> #define HOST_CTRL0_SIDDQ (1 << 6)
>> @@ -61,6 +68,12 @@ struct exynos_usb_phy {
>> unsigned int usbotgtune;
>> };
>>
>> +struct exynos4412_usb_phy {
>> + unsigned int usbphyctrl;
>> + unsigned int usbphyclk;
>> + unsigned int usbphyrstcon;
>> +};
>> +
>> /* Switch on the VBUS power. */
>> int board_usb_vbus_init(void);
>>
>> diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
>> index e8a98a5..3f97b31 100644
>> --- a/arch/arm/include/asm/arch-exynos/power.h
>> +++ b/arch/arm/include/asm/arch-exynos/power.h
>> @@ -210,6 +210,13 @@ struct exynos4_power {
>> unsigned int gps_alive_option;
>> };
>>
>> +struct exynos4412_power {
>> + unsigned char res1[0x0704];
>> + unsigned int usbhost_phy_control;
>> + unsigned int hsic1_phy_control;
>> + unsigned int hsic2_phy_control;
>> +};
>> +
>> struct exynos5_power {
>> unsigned int om_stat;
>> unsigned char res1[0x18];
>> diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
>> index fd5d2d2..4764a71 100644
>> --- a/board/samsung/odroid/odroid.c
>> +++ b/board/samsung/odroid/odroid.c
>> @@ -453,9 +453,64 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
>> .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
>> .usb_flags = PHY0_SLEEP,
>> };
>> +#endif
>> +
>> +#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
>> +
>> +#ifdef CONFIG_CMD_USB
>> +static void set_usb_ethaddr(void)
>> +{
>> + int i;
>> + uchar mac[6];
>> + unsigned int guid_high = readl(EXYNOS4_GUID_HIGH);
>> + unsigned int guid_low = readl(EXYNOS4_GUID_LOW);
>> +
>> + for (i = 0; i < 2; i++)
>> + mac[i] = (guid_high >> (8 * (1 - i))) & 0xFF;
>> +
>> + for (i = 0; i < 4; i++)
>> + mac[i+2] = (guid_low >> (8 * (3 - i))) & 0xFF;
>> +
>> + /* mark it as not multicast and outside official 80211 MAC namespace */
>> + mac[0] = (mac[0] & ~0x1) | 0x2;
>> +
>> + eth_setenv_enetaddr("ethaddr", mac);
>> + eth_setenv_enetaddr("usbethaddr", mac);
>> +}
>> +#endif
>>
>> int board_usb_init(int index, enum usb_init_type init)
>> {
>> +#ifdef CONFIG_CMD_USB
>> + struct pmic *p_pmic;
>> +
>> + /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
>> + /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
>> + if (gd->board_type == ODROID_TYPE_U3)
>> + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
>> + else
>> + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
>> +
>> + /* Disconnect, Reset, Connect */
>> + gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X35, 0);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X35, 1);
>> + gpio_direction_output(EXYNOS4X12_GPIO_X34, 1);
>> +
>> + /* Power off and on BUCK8 for LAN9730 */
>> + debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
>> +
>> + p_pmic = pmic_get("MAX77686_PMIC");
>> + if (p_pmic && !pmic_probe(p_pmic)) {
>> + max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF);
>> + max77686_set_buck_voltage(p_pmic, 8, 750000);
>> + max77686_set_buck_voltage(p_pmic, 8, 3300000);
>> + max77686_set_buck_mode(p_pmic, 8, OPMODE_ON);
>> + }
>> +
>> + set_usb_ethaddr();
>> +#endif
>> +
>> debug("USB_udc_probe\n");
>> return s3c_udc_probe(&s5pc210_otg_data);
>> }
>> diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
>> index edd91a8..91f3c72 100644
>> --- a/drivers/usb/host/ehci-exynos.c
>> +++ b/drivers/usb/host/ehci-exynos.c
>> @@ -19,6 +19,7 @@
>> #include <asm/gpio.h>
>> #include <asm-generic/errno.h>
>> #include <linux/compat.h>
>> +#include <power/max77686_pmic.h>
>> #include "ehci.h"
>>
>> /* Declare global data pointer */
>> @@ -85,15 +86,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
>> }
>> #endif
>>
>> -/* Setup the EHCI host controller. */
>> -static void setup_usb_phy(struct exynos_usb_phy *usb)
>> +static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
>> {
>> u32 hsic_ctrl;
>>
>> - set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
>> -
>> - set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
>> -
>> clrbits_le32(&usb->usbphyctrl0,
>> HOST_CTRL0_FSEL_MASK |
>> HOST_CTRL0_COMMONON_N |
>> @@ -150,8 +146,32 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
>> EHCICTRL_ENAINCR16);
>> }
>>
>> -/* Reset the EHCI host controller. */
>> -static void reset_usb_phy(struct exynos_usb_phy *usb)
>> +static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
>> +{
>> + writel(CLK_24MHZ, &usb->usbphyclk);
>> +
>> + clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
>> + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
>> + PHYPWR_NORMAL_MASK_PHY0));
>> +
>> + setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
>> + udelay(10);
>> + clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
>> +}
>> +
>> +static void setup_usb_phy(struct exynos_usb_phy *usb)
>> +{
>> + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
>> +
>> + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
>> +
>> + if (cpu_is_exynos5())
>> + exynos5_setup_usb_phy(usb);
>> + else if (proid_is_exynos4412())
>> + exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)usb);
>> +}
>> +
>> +static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
>> {
>> u32 hsic_ctrl;
>>
>> @@ -171,6 +191,22 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
>>
>> setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
>> setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
>> +}
>> +
>> +static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
>> +{
>> + setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
>> + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
>> + PHYPWR_NORMAL_MASK_PHY0));
>> +}
>> +
>> +/* Reset the EHCI host controller. */
>> +static void reset_usb_phy(struct exynos_usb_phy *usb)
>> +{
>> + if (cpu_is_exynos5())
>> + exynos5_reset_usb_phy(usb);
>> + else if (proid_is_exynos4412())
>> + exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)usb);
>>
>> set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
>> }
>> diff --git a/include/configs/odroid.h b/include/configs/odroid.h
>> index b616ac2..3fc0508 100644
>> --- a/include/configs/odroid.h
>> +++ b/include/configs/odroid.h
>> @@ -200,6 +200,19 @@
>>
>> #define CONFIG_CMD_GPIO
>>
>> +/* USB */
>> +#define CONFIG_CMD_USB
>> +#define CONFIG_USB_EHCI
>> +#define CONFIG_USB_EHCI_EXYNOS
>> +#define CONFIG_USB_STORAGE
>> +
>> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
>> +#define CONFIG_CMD_NET
>> +#define CONFIG_CMD_PING
>> +#define CONFIG_CMD_DHCP
>> +#define CONFIG_USB_HOST_ETHER
>> +#define CONFIG_USB_ETHER_SMSC95XX
>> +
>> /*
>> * Supported Odroid boards: X3, U3
>> * TODO: Add Odroid X support
>>
>
More information about the U-Boot
mailing list