[U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings

[Albert ARIBAUD]

Hi Suriyan,

On Thu,  2 Oct 2014 06:45:58 -0700, Suriyan Ramasami
<suriyan.r at gmail.com> wrote:

> Allow to set the bucket voltage for the max77686.
> This will be used to reset the SMC LAN9730 ethernet on the odroids.

I believe the correct term is "buck", not "bucket".

> Signed-off-by: Suriyan Ramasami <suriyan.r at gmail.com>
> ---
>  drivers/power/pmic/pmic_max77686.c | 48 +++++++++++++++++++++++++++++++++++++-
>  include/power/max77686_pmic.h      |  3 +++
>  2 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
> index df1fd91..1aeadb4 100644
> --- a/drivers/power/pmic/pmic_max77686.c
> +++ b/drivers/power/pmic/pmic_max77686.c
> @@ -42,6 +42,25 @@ static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
>  	return 0;
>  }
>  
> +static unsigned int max77686_buck_volt2hex(int buck, ulong uV)
> +{
> +	unsigned int hex = 0;
> +
> +	if (buck < 5 || buck > 9) {
> +		debug("%s: buck %d is not supported\n", __func__, buck);
> +		return 0;
> +	}
> +
> +	hex = (uV - 750000) / 50000;
> +
> +	if (hex >= 0 && hex <= MAX77686_BUCK_VOLT_MAX_HEX)
> +		return hex;
> +
> +	debug("%s: %ld is wrong voltage value for BUCK%d\n",
> +	      __func__, uV, buck);
> +	return MAX77686_BUCK_VOLT_MAX_HEX + 1;
> +}
> +
>  int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
>  {
>  	unsigned int val, ret, hex, adr;
> @@ -68,6 +87,33 @@ int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
>  	return ret;
>  }
>  
> +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV)
> +{
> +	unsigned int val, ret, hex, adr;
> +
> +	if (buck < 5 && buck > 9) {
> +		printf("%s: %d is an unsupported bucket number\n",
> +		       __func__, buck);
> +		return -1;
> +	}
> +
> +	adr = max77686_buck_addr[buck] + 1;
> +	hex = max77686_buck_volt2hex(buck, uV);
> +
> +	if (hex == MAX77686_BUCK_VOLT_MAX_HEX + 1)
> +		return -1;
> +
> +	ret = pmic_reg_read(p, adr, &val);
> +	if (ret)
> +		return ret;
> +
> +	val &= ~MAX77686_BUCK_VOLT_MASK;
> +	val |= hex;
> +	ret |= pmic_reg_write(p, adr, val);
> +
> +	return ret;
> +}
> +
>  int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
>  {
>  	unsigned int val, ret, adr, mode;
> @@ -157,7 +203,7 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
>  	/* mode */
>  	switch (opmode) {
>  	case OPMODE_OFF:
> -		mode = MAX77686_BUCK_MODE_OFF;
> +		mode = MAX77686_BUCK_MODE_OFF << mode_shift;
>  		break;
>  	case OPMODE_STANDBY:
>  		switch (buck) {
> diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
> index c2a772a..b0e4255 100644
> --- a/include/power/max77686_pmic.h
> +++ b/include/power/max77686_pmic.h
> @@ -150,6 +150,7 @@ enum {
>  
>  int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
>  int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
> +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV);
>  int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
>  
>  #define MAX77686_LDO_VOLT_MAX_HEX	0x3f
> @@ -159,6 +160,8 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
>  #define MAX77686_LDO_MODE_STANDBY	(0x01 << 0x06)
>  #define MAX77686_LDO_MODE_LPM		(0x02 << 0x06)
>  #define MAX77686_LDO_MODE_ON		(0x03 << 0x06)
> +#define MAX77686_BUCK_VOLT_MAX_HEX	0x3f
> +#define MAX77686_BUCK_VOLT_MASK		0x3f
>  #define MAX77686_BUCK_MODE_MASK		0x03
>  #define MAX77686_BUCK_MODE_SHIFT_1	0x00
>  #define MAX77686_BUCK_MODE_SHIFT_2	0x04


Amicalement,
-- 
Albert.