[U-Boot] [PATCH v1 1/2] odroid: pmic77686: allow bucket voltage settings
Suriyan Ramasami
suriyan.r at gmail.com
Fri Oct 3 00:07:55 CEST 2014
On Thu, Oct 2, 2014 at 2:03 PM, Albert ARIBAUD
<albert.u.boot at aribaud.net> wrote:
> Hi Suriyan,
>
> On Thu, 2 Oct 2014 06:45:58 -0700, Suriyan Ramasami
> <suriyan.r at gmail.com> wrote:
>
>> Allow to set the bucket voltage for the max77686.
>> This will be used to reset the SMC LAN9730 ethernet on the odroids.
>
> I believe the correct term is "buck", not "bucket".
>
Thanks Albert,
I always thought they stood for bucket! This prompted me to read up
on BUCK regulators. Thank you. I shall correct it in my next version.
- Suriyan
>> Signed-off-by: Suriyan Ramasami <suriyan.r at gmail.com>
>> ---
>> drivers/power/pmic/pmic_max77686.c | 48 +++++++++++++++++++++++++++++++++++++-
>> include/power/max77686_pmic.h | 3 +++
>> 2 files changed, 50 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
>> index df1fd91..1aeadb4 100644
>> --- a/drivers/power/pmic/pmic_max77686.c
>> +++ b/drivers/power/pmic/pmic_max77686.c
>> @@ -42,6 +42,25 @@ static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
>> return 0;
>> }
>>
>> +static unsigned int max77686_buck_volt2hex(int buck, ulong uV)
>> +{
>> + unsigned int hex = 0;
>> +
>> + if (buck < 5 || buck > 9) {
>> + debug("%s: buck %d is not supported\n", __func__, buck);
>> + return 0;
>> + }
>> +
>> + hex = (uV - 750000) / 50000;
>> +
>> + if (hex >= 0 && hex <= MAX77686_BUCK_VOLT_MAX_HEX)
>> + return hex;
>> +
>> + debug("%s: %ld is wrong voltage value for BUCK%d\n",
>> + __func__, uV, buck);
>> + return MAX77686_BUCK_VOLT_MAX_HEX + 1;
>> +}
>> +
>> int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
>> {
>> unsigned int val, ret, hex, adr;
>> @@ -68,6 +87,33 @@ int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
>> return ret;
>> }
>>
>> +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV)
>> +{
>> + unsigned int val, ret, hex, adr;
>> +
>> + if (buck < 5 && buck > 9) {
>> + printf("%s: %d is an unsupported bucket number\n",
>> + __func__, buck);
>> + return -1;
>> + }
>> +
>> + adr = max77686_buck_addr[buck] + 1;
>> + hex = max77686_buck_volt2hex(buck, uV);
>> +
>> + if (hex == MAX77686_BUCK_VOLT_MAX_HEX + 1)
>> + return -1;
>> +
>> + ret = pmic_reg_read(p, adr, &val);
>> + if (ret)
>> + return ret;
>> +
>> + val &= ~MAX77686_BUCK_VOLT_MASK;
>> + val |= hex;
>> + ret |= pmic_reg_write(p, adr, val);
>> +
>> + return ret;
>> +}
>> +
>> int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
>> {
>> unsigned int val, ret, adr, mode;
>> @@ -157,7 +203,7 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
>> /* mode */
>> switch (opmode) {
>> case OPMODE_OFF:
>> - mode = MAX77686_BUCK_MODE_OFF;
>> + mode = MAX77686_BUCK_MODE_OFF << mode_shift;
>> break;
>> case OPMODE_STANDBY:
>> switch (buck) {
>> diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
>> index c2a772a..b0e4255 100644
>> --- a/include/power/max77686_pmic.h
>> +++ b/include/power/max77686_pmic.h
>> @@ -150,6 +150,7 @@ enum {
>>
>> int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
>> int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
>> +int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV);
>> int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
>>
>> #define MAX77686_LDO_VOLT_MAX_HEX 0x3f
>> @@ -159,6 +160,8 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
>> #define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06)
>> #define MAX77686_LDO_MODE_LPM (0x02 << 0x06)
>> #define MAX77686_LDO_MODE_ON (0x03 << 0x06)
>> +#define MAX77686_BUCK_VOLT_MAX_HEX 0x3f
>> +#define MAX77686_BUCK_VOLT_MASK 0x3f
>> #define MAX77686_BUCK_MODE_MASK 0x03
>> #define MAX77686_BUCK_MODE_SHIFT_1 0x00
>> #define MAX77686_BUCK_MODE_SHIFT_2 0x04
>
>
> Amicalement,
> --
> Albert.
More information about the U-Boot
mailing list