[U-Boot] [PATCH 2/2] sunxi: Request USB vbus gpio

[Hans de Goede]

This is necessary for the device-model enabled builds to work properly.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/usb/host/ehci-sunxi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index d65e798..4befd57 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -163,11 +163,16 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+	int err;
 
 	/* enable common PHY only once */
 	if (index == 0)
 		setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
 
+	err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
+	if (err)
+		return err;
+
 	sunxi_ehci_enable(sunxi_ehci);
 
 	*hccr = get_io_base(sunxi_ehci->id);
@@ -188,9 +193,14 @@ int ehci_hcd_stop(int index)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+	int err;
 
 	sunxi_ehci_disable(sunxi_ehci);
 
+	err = gpio_free(sunxi_ehci->gpio_vbus);
+	if (err)
+		return err;
+
 	/* disable common PHY only once, for the last enabled hcd */
 	if (enabled_hcd_count == 1)
 		clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-- 
2.1.0