[U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init()

[Heiko Schocher]

Hello Bo,

Am 31.10.2014 02:55, schrieb Bo Shen:
> Hi Heiko,
>
> On 10/30/2014 04:14 PM, Heiko Schocher wrote:
>> use the configure value for computing the ba_off value
>> not the value from the cr register. This leaded in a
>> wrong ram configuration on the upcoming corvus spl board
>> support.
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>> Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>>
>> ---
>>
>> Changes in v2:
>> add Reviewed-by: Andreas Bießmann <andreas.devel at googlemail.com>
>>
>> arch/arm/cpu/at91-common/mpddrc.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c
>> index 8136396..76668d2 100644
>> --- a/arch/arm/cpu/at91-common/mpddrc.c
>> +++ b/arch/arm/cpu/at91-common/mpddrc.c
>> @@ -26,7 +26,8 @@ int ddr2_init(const unsigned int ram_address,
>> /* Compute bank offset according to NC in configuration register */
>> ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
>> if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
>> - ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
>> + ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2)
>> + + 11;
>
> As Andreas suggested, can we ignore the 80 character's warning here?

Ok, changes this ... so I send a v3.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany