[U-Boot] [PATCH v4 05/20] arm: mvebu: Add common mbus functions to use on Marvell SoCs
Stefan Roese
sr at denx.de
Wed Oct 22 12:13:09 CEST 2014
These mbus functions are ported from Barebox. The Barebox version is
ported from Linux. These functions will be first used by the upcoming
Armada XP support. Later other Marvell SoC's will be adopted to use
these functions as well (Kirkwood, Orion).
Signed-off-by: Stefan Roese <sr at denx.de>
Tested-by: Luka Perkov <luka at openwrt.org>
---
Changes in v4: None
Changes in v3:
- Added Tested-by from Luka
Changes in v2:
- Fixed issue in mbus_dt_setup_win() to also assign remappable windows
- Made mbus_dt_setup_win() non-static, so that it can be called from
other files for board specific mbus window configuration
arch/arm/mvebu-common/Makefile | 1 +
arch/arm/mvebu-common/mbus.c | 471 +++++++++++++++++++++++++++++++++++++++++
include/linux/mbus.h | 73 +++++++
3 files changed, 545 insertions(+)
create mode 100644 arch/arm/mvebu-common/mbus.c
create mode 100644 include/linux/mbus.h
diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile
index 4d20d2c..391a125 100644
--- a/arch/arm/mvebu-common/Makefile
+++ b/arch/arm/mvebu-common/Makefile
@@ -7,4 +7,5 @@
#
obj-y = dram.o
+obj-$(CONFIG_ARMADA_XP) += mbus.o
obj-y += timer.o
diff --git a/arch/arm/mvebu-common/mbus.c b/arch/arm/mvebu-common/mbus.c
new file mode 100644
index 0000000..05c9ef2
--- /dev/null
+++ b/arch/arm/mvebu-common/mbus.c
@@ -0,0 +1,471 @@
+/*
+ * Address map functions for Marvell EBU SoCs (Kirkwood, Armada
+ * 370/XP, Dove, Orion5x and MV78xx0)
+ *
+ * Ported from the Barebox version to U-Boot by:
+ * Stefan Roese <sr at denx.de>
+ *
+ * The Barebox version is:
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * based on mbus driver from Linux
+ * (C) Copyright 2008 Marvell Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * The Marvell EBU SoCs have a configurable physical address space:
+ * the physical address at which certain devices (PCIe, NOR, NAND,
+ * etc.) sit can be configured. The configuration takes place through
+ * two sets of registers:
+ *
+ * - One to configure the access of the CPU to the devices. Depending
+ * on the families, there are between 8 and 20 configurable windows,
+ * each can be use to create a physical memory window that maps to a
+ * specific device. Devices are identified by a tuple (target,
+ * attribute).
+ *
+ * - One to configure the access to the CPU to the SDRAM. There are
+ * either 2 (for Dove) or 4 (for other families) windows to map the
+ * SDRAM into the physical address space.
+ *
+ * This driver:
+ *
+ * - Reads out the SDRAM address decoding windows at initialization
+ * time, and fills the mbus_dram_info structure with these
+ * informations. The exported function mv_mbus_dram_info() allow
+ * device drivers to get those informations related to the SDRAM
+ * address decoding windows. This is because devices also have their
+ * own windows (configured through registers that are part of each
+ * device register space), and therefore the drivers for Marvell
+ * devices have to configure those device -> SDRAM windows to ensure
+ * that DMA works properly.
+ *
+ * - Provides an API for platform code or device drivers to
+ * dynamically add or remove address decoding windows for the CPU ->
+ * device accesses. This API is mvebu_mbus_add_window_by_id(),
+ * mvebu_mbus_add_window_remap_by_id() and
+ * mvebu_mbus_del_window().
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/mbus.h>
+
+#define BIT(nr) (1UL << (nr))
+
+/* DDR target is the same on all platforms */
+#define TARGET_DDR 0
+
+/* CPU Address Decode Windows registers */
+#define WIN_CTRL_OFF 0x0000
+#define WIN_CTRL_ENABLE BIT(0)
+#define WIN_CTRL_TGT_MASK 0xf0
+#define WIN_CTRL_TGT_SHIFT 4
+#define WIN_CTRL_ATTR_MASK 0xff00
+#define WIN_CTRL_ATTR_SHIFT 8
+#define WIN_CTRL_SIZE_MASK 0xffff0000
+#define WIN_CTRL_SIZE_SHIFT 16
+#define WIN_BASE_OFF 0x0004
+#define WIN_BASE_LOW 0xffff0000
+#define WIN_BASE_HIGH 0xf
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_LOW 0xffff0000
+#define WIN_REMAP_HI_OFF 0x000c
+
+#define ATTR_HW_COHERENCY (0x1 << 4)
+
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_BASE_CS_HIGH_MASK 0xf
+#define DDR_BASE_CS_LOW_MASK 0xff000000
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+#define DDR_SIZE_ENABLED BIT(0)
+#define DDR_SIZE_CS_MASK 0x1c
+#define DDR_SIZE_CS_SHIFT 2
+#define DDR_SIZE_MASK 0xff000000
+
+#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
+
+struct mvebu_mbus_state;
+
+struct mvebu_mbus_soc_data {
+ unsigned int num_wins;
+ unsigned int num_remappable_wins;
+ unsigned int (*win_cfg_offset)(const int win);
+ void (*setup_cpu_target)(struct mvebu_mbus_state *s);
+};
+
+struct mvebu_mbus_state mbus_state
+ __attribute__ ((section(".data")));
+static struct mbus_dram_target_info mbus_dram_info
+ __attribute__ ((section(".data")));
+
+/*
+ * Functions to manipulate the address decoding windows
+ */
+
+static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
+ int win, int *enabled, u64 *base,
+ u32 *size, u8 *target, u8 *attr,
+ u64 *remap)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 basereg = readl(addr + WIN_BASE_OFF);
+ u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
+
+ if (!(ctrlreg & WIN_CTRL_ENABLE)) {
+ *enabled = 0;
+ return;
+ }
+
+ *enabled = 1;
+ *base = ((u64)basereg & WIN_BASE_HIGH) << 32;
+ *base |= (basereg & WIN_BASE_LOW);
+ *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
+
+ if (target)
+ *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
+
+ if (attr)
+ *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
+
+ if (remap) {
+ if (win < mbus->soc->num_remappable_wins) {
+ u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
+ u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF);
+ *remap = ((u64)remap_hi << 32) | remap_low;
+ } else {
+ *remap = 0;
+ }
+ }
+}
+
+static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
+ int win)
+{
+ void __iomem *addr;
+
+ addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (win < mbus->soc->num_remappable_wins) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+/* Checks whether the given window number is available */
+static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
+ const int win)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 ctrl = readl(addr + WIN_CTRL_OFF);
+ return !(ctrl & WIN_CTRL_ENABLE);
+}
+
+/*
+ * Checks whether the given (base, base+size) area doesn't overlap an
+ * existing region
+ */
+static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size,
+ u8 target, u8 attr)
+{
+ u64 end = (u64)base + size;
+ int win;
+
+ for (win = 0; win < mbus->soc->num_wins; win++) {
+ u64 wbase, wend;
+ u32 wsize;
+ u8 wtarget, wattr;
+ int enabled;
+
+ mvebu_mbus_read_window(mbus, win,
+ &enabled, &wbase, &wsize,
+ &wtarget, &wattr, NULL);
+
+ if (!enabled)
+ continue;
+
+ wend = wbase + wsize;
+
+ /*
+ * Check if the current window overlaps with the
+ * proposed physical range
+ */
+ if ((u64)base < wend && end > wbase)
+ return 0;
+
+ /*
+ * Check if target/attribute conflicts
+ */
+ if (target == wtarget && attr == wattr)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size)
+{
+ int win;
+
+ for (win = 0; win < mbus->soc->num_wins; win++) {
+ u64 wbase;
+ u32 wsize;
+ int enabled;
+
+ mvebu_mbus_read_window(mbus, win,
+ &enabled, &wbase, &wsize,
+ NULL, NULL, NULL);
+
+ if (!enabled)
+ continue;
+
+ if (base == wbase && size == wsize)
+ return win;
+ }
+
+ return -ENODEV;
+}
+
+static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
+ int win, phys_addr_t base, size_t size,
+ phys_addr_t remap, u8 target,
+ u8 attr)
+{
+ void __iomem *addr = mbus->mbuswins_base +
+ mbus->soc->win_cfg_offset(win);
+ u32 ctrl, remap_addr;
+
+ ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
+ (attr << WIN_CTRL_ATTR_SHIFT) |
+ (target << WIN_CTRL_TGT_SHIFT) |
+ WIN_CTRL_ENABLE;
+
+ writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (win < mbus->soc->num_remappable_wins) {
+ if (remap == MVEBU_MBUS_NO_REMAP)
+ remap_addr = base;
+ else
+ remap_addr = remap;
+ writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+
+ return 0;
+}
+
+static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap, u8 target,
+ u8 attr)
+{
+ int win;
+
+ if (remap == MVEBU_MBUS_NO_REMAP) {
+ for (win = mbus->soc->num_remappable_wins;
+ win < mbus->soc->num_wins; win++)
+ if (mvebu_mbus_window_is_free(mbus, win))
+ return mvebu_mbus_setup_window(mbus, win, base,
+ size, remap,
+ target, attr);
+ }
+
+
+ for (win = 0; win < mbus->soc->num_wins; win++)
+ if (mvebu_mbus_window_is_free(mbus, win))
+ return mvebu_mbus_setup_window(mbus, win, base, size,
+ remap, target, attr);
+
+ return -ENOMEM;
+}
+
+/*
+ * SoC-specific functions and definitions
+ */
+
+static unsigned int armada_370_xp_mbus_win_offset(int win)
+{
+ /* The register layout is a bit annoying and the below code
+ * tries to cope with it.
+ * - At offset 0x0, there are the registers for the first 8
+ * windows, with 4 registers of 32 bits per window (ctrl,
+ * base, remap low, remap high)
+ * - Then at offset 0x80, there is a hole of 0x10 bytes for
+ * the internal registers base address and internal units
+ * sync barrier register.
+ * - Then at offset 0x90, there the registers for 12
+ * windows, with only 2 registers of 32 bits per window
+ * (ctrl, base).
+ */
+ if (win < 8)
+ return win << 4;
+ else
+ return 0x90 + ((win - 8) << 3);
+}
+
+static unsigned int orion5x_mbus_win_offset(int win)
+{
+ return win << 4;
+}
+
+static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+ int i;
+ int cs;
+
+ mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
+ */
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
+
+ w = &mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+#if defined(CONFIG_ARMADA_XP)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+#endif
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
+ }
+ }
+ mbus_dram_info.num_cs = cs;
+}
+
+static const struct mvebu_mbus_soc_data
+armada_370_xp_mbus_data __maybe_unused = {
+ .num_wins = 20,
+ .num_remappable_wins = 8,
+ .win_cfg_offset = armada_370_xp_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+};
+
+static const struct mvebu_mbus_soc_data
+kirkwood_mbus_data __maybe_unused = {
+ .num_wins = 8,
+ .num_remappable_wins = 4,
+ .win_cfg_offset = orion5x_mbus_win_offset,
+ .setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
+};
+
+/*
+ * Public API of the driver
+ */
+const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
+{
+ return &mbus_dram_info;
+}
+
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+ unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap)
+{
+ struct mvebu_mbus_state *s = &mbus_state;
+
+ if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
+ printf("Cannot add window '%x:%x', conflicts with another window\n",
+ target, attribute);
+ return -EINVAL;
+ }
+
+ return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
+}
+
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size)
+{
+ return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+ size, MVEBU_MBUS_NO_REMAP);
+}
+
+int mvebu_mbus_del_window(phys_addr_t base, size_t size)
+{
+ int win;
+
+ win = mvebu_mbus_find_window(&mbus_state, base, size);
+ if (win < 0)
+ return win;
+
+ mvebu_mbus_disable_window(&mbus_state, win);
+ return 0;
+}
+
+int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
+ u32 base, u32 size, u8 target, u8 attr)
+{
+ if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
+ printf("Cannot add window '%04x:%04x', conflicts with another window\n",
+ target, attr);
+ return -EBUSY;
+ }
+
+ /*
+ * In U-Boot we first try to add the mbus window to the remap windows.
+ * If this fails, lets try to add the windows to the non-remap windows.
+ */
+ if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) {
+ if (mvebu_mbus_alloc_window(mbus, base, size,
+ MVEBU_MBUS_NO_REMAP, target, attr))
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int mvebu_mbus_probe(struct mbus_win windows[], int count)
+{
+ int win;
+ int ret;
+ int i;
+
+#if defined(CONFIG_KIRKWOOD)
+ mbus_state.soc = &kirkwood_mbus_data;
+#endif
+#if defined(CONFIG_ARMADA_XP)
+ mbus_state.soc = &armada_370_xp_mbus_data;
+#endif
+
+ mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE;
+ mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE;
+
+ for (win = 0; win < mbus_state.soc->num_wins; win++)
+ mvebu_mbus_disable_window(&mbus_state, win);
+
+ mbus_state.soc->setup_cpu_target(&mbus_state);
+
+ /* Setup statically declared windows in the DT */
+ for (i = 0; i < count; i++) {
+ u32 base, size;
+ u8 target, attr;
+
+ target = windows[i].target;
+ attr = windows[i].attr;
+ base = windows[i].base;
+ size = windows[i].size;
+ ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
new file mode 100644
index 0000000..717cbea
--- /dev/null
+++ b/include/linux/mbus.h
@@ -0,0 +1,73 @@
+/*
+ * Marvell MBUS common definitions.
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MBUS_H
+#define __LINUX_MBUS_H
+
+struct resource;
+
+struct mbus_dram_target_info {
+ /*
+ * The 4-bit MBUS target ID of the DRAM controller.
+ */
+ u8 mbus_dram_target_id;
+
+ /*
+ * The base address, size, and MBUS attribute ID for each
+ * of the possible DRAM chip selects. Peripherals are
+ * required to support at least 4 decode windows.
+ */
+ int num_cs;
+ struct mbus_dram_window {
+ u8 cs_index;
+ u8 mbus_attr;
+ u32 base;
+ u32 size;
+ } cs[4];
+};
+
+struct mvebu_mbus_state {
+ void __iomem *mbuswins_base;
+ void __iomem *sdramwins_base;
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_sdram;
+ struct dentry *debugfs_devs;
+ const struct mvebu_mbus_soc_data *soc;
+ int hw_io_coherency;
+};
+
+/* Flags for PCI/PCIe address decoding regions */
+#define MVEBU_MBUS_PCI_IO 0x1
+#define MVEBU_MBUS_PCI_MEM 0x2
+#define MVEBU_MBUS_PCI_WA 0x3
+
+/*
+ * Magic value that explicits that we don't need a remapping-capable
+ * address decoding window.
+ */
+#define MVEBU_MBUS_NO_REMAP (0xffffffff)
+
+/* Maximum size of a mbus window name */
+#define MVEBU_MBUS_MAX_WINNAME_SZ 32
+
+const struct mbus_dram_target_info *mvebu_mbus_dram_info(void);
+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
+void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+ unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap);
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size);
+int mvebu_mbus_del_window(phys_addr_t base, size_t size);
+int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
+ u32 base, u32 size, u8 target, u8 attr);
+
+#endif /* __LINUX_MBUS_H */
--
2.1.2
More information about the U-Boot
mailing list