[U-Boot] [PATCH 15/25] eeprom: Pull out address computation
Marek Vasut
marex at denx.de
Mon Oct 20 03:48:16 CEST 2014
Pull out the code computing the EEPROM address into separate function
so that it's not duplicated.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Simon Glass <sjg at chromium.org>
Cc: Tom Rini <trini at ti.com>
Cc: Heiko Schocher <hs at denx.de>
---
common/cmd_eeprom.c | 64 ++++++++++++++++++++++-------------------------------
1 file changed, 26 insertions(+), 38 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index b956233..78c6121 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -66,6 +66,28 @@ void eeprom_init(void)
#endif
}
+static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
+{
+ unsigned blk_off;
+ int alen;
+
+ blk_off = offset & 0xff; /* block offset */
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
+ addr[0] = offset >> 8; /* block number */
+ addr[1] = blk_off; /* block offset */
+ alen = 2;
+#else
+ addr[0] = offset >> 16; /* block number */
+ addr[1] = offset >> 8; /* upper address octet */
+ addr[2] = blk_off; /* lower address octet */
+ alen = 3;
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
+
+ addr[0] |= dev_addr; /* insert device address */
+
+ return alen;
+}
+
static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
uchar *buffer, unsigned len, bool read)
{
@@ -94,6 +116,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
+ uchar addr[3];
/*
* Read data until done or would cross a page boundary.
@@ -106,26 +129,8 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
- uchar addr[2];
-
- blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 8; /* block number */
- addr[1] = blk_off; /* block offset */
- alen = 2;
-#else
- uchar addr[3];
-
blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 16; /* block number */
- addr[1] = offset >> 8; /* upper address octet */
- addr[2] = blk_off; /* lower address octet */
- alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
-
- addr[0] |= dev_addr; /* insert device address */
+ alen = eeprom_addr(dev_addr, offset, addr);
len = end - offset;
@@ -156,6 +161,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
+ uchar addr[3];
#if defined(CONFIG_SYS_EEPROM_WREN)
eeprom_write_enable (dev_addr,1);
@@ -172,26 +178,8 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
unsigned maxlen;
#endif
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
- uchar addr[2];
-
blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 8; /* block number */
- addr[1] = blk_off; /* block offset */
- alen = 2;
-#else
- uchar addr[3];
-
- blk_off = offset & 0xFF; /* block offset */
-
- addr[0] = offset >> 16; /* block number */
- addr[1] = offset >> 8; /* upper address octet */
- addr[2] = blk_off; /* lower address octet */
- alen = 3;
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
-
- addr[0] |= dev_addr; /* insert device address */
+ alen = eeprom_addr(dev_addr, offset, addr);
len = end - offset;
--
2.1.1
More information about the U-Boot
mailing list