[U-Boot] [PATCH 14/23] test: dm: Update GPIO tests for new gpio_request() method

Simon Glass sjg at chromium.org
Sat Oct 4 19:29:48 CEST 2014


Now that gpio_request() is handled by the uclass, updates the tests
accordingly.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 doc/driver-model/README.txt | 25 +++++++++++++++++++--
 test/dm/gpio.c              | 55 +++++++++++++++++++++++++++------------------
 2 files changed, 56 insertions(+), 24 deletions(-)

diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt
index 8dfcf75..1ff454a 100644
--- a/doc/driver-model/README.txt
+++ b/doc/driver-model/README.txt
@@ -95,7 +95,7 @@ are provided in test/dm. To run them, try:
 You should see something like this:
 
     <...U-Boot banner...>
-    Running 22 driver model tests
+    Running 26 driver model tests
     Test: dm_test_autobind
     Test: dm_test_autoprobe
     Test: dm_test_bus_children
@@ -115,7 +115,8 @@ You should see something like this:
     Device 'd-test': seq 3 is in use by 'b-test'
     Device 'a-test': seq 0 is in use by 'd-test'
     Test: dm_test_gpio
-    sandbox_gpio: sb_gpio_get_value: error: offset 4 not reserved
+    extra-gpios: get_value: error: gpio b5 not reserved
+    Test: dm_test_gpio_anon
     Test: dm_test_leak
     Test: dm_test_lifecycle
     Test: dm_test_operations
@@ -123,6 +124,26 @@ You should see something like this:
     Test: dm_test_platdata
     Test: dm_test_pre_reloc
     Test: dm_test_remove
+    Test: dm_test_spi_find
+    Invalid chip select 0:0 (err=-19)
+    SF: Failed to get idcodes
+    Device 'name-emul': seq 0 is in use by 'name-emul'
+    SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
+    Test: dm_test_spi_flash
+    2097152 bytes written in 0 ms
+    SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
+    SPI flash test:
+    0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    Test passed
+    0 erase: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    1 check: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    2 write: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    3 read: 0 ticks, 65536000 KiB/s 524288.000 Mbps
+    Test: dm_test_spi_xfer
+    SF: Detected M25P16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
     Test: dm_test_uclass
     Test: dm_test_uclass_before_ready
     Failures: 0
diff --git a/test/dm/gpio.c b/test/dm/gpio.c
index 2b2b0b5..ad56ca5 100644
--- a/test/dm/gpio.c
+++ b/test/dm/gpio.c
@@ -39,52 +39,51 @@ static int dm_test_gpio(struct dm_test_state *dms)
 
 	/* Get the operations for this device */
 	ops = gpio_get_ops(dev);
-	ut_assert(ops->get_state);
+	ut_assert(ops->get_function);
 
 	/* Cannot get a value until it is reserved */
-	ut_asserteq(-1, ops->get_value(dev, offset));
-
+	ut_asserteq(-EBUSY, gpio_get_value(gpio + 1));
 	/*
 	 * Now some tests that use the 'sandbox' back door. All GPIOs
 	 * should default to input, include b4 that we are using here.
 	 */
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4:  in: 0 [ ]", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: input: 0 [ ]", buf);
 
 	/* Change it to an output */
 	sandbox_gpio_set_direction(dev, offset, 1);
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4: out: 0 [ ]", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: output: 0 [ ]", buf);
 
 	sandbox_gpio_set_value(dev, offset, 1);
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4: out: 1 [ ]", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: output: 1 [ ]", buf);
 
-	ut_assertok(ops->request(dev, offset, "testing"));
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4: out: 1 [x] testing", buf);
+	ut_assertok(gpio_request(gpio, "testing"));
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: output: 1 [x] testing", buf);
 
 	/* Change the value a bit */
 	ut_asserteq(1, ops->get_value(dev, offset));
 	ut_assertok(ops->set_value(dev, offset, 0));
 	ut_asserteq(0, ops->get_value(dev, offset));
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4: out: 0 [x] testing", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: output: 0 [x] testing", buf);
 	ut_assertok(ops->set_value(dev, offset, 1));
 	ut_asserteq(1, ops->get_value(dev, offset));
 
 	/* Make it an input */
 	ut_assertok(ops->direction_input(dev, offset));
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4:  in: 1 [x] testing", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: input: 1 [x] testing", buf);
 	sandbox_gpio_set_value(dev, offset, 0);
 	ut_asserteq(0, sandbox_gpio_get_value(dev, offset));
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4:  in: 0 [x] testing", buf);
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: input: 0 [x] testing", buf);
 
-	ut_assertok(ops->free(dev, offset));
-	ut_assertok(ops->get_state(dev, offset, buf, sizeof(buf)));
-	ut_asserteq_str("b4:  in: 0 [ ]", buf);
+	ut_assertok(gpio_free(gpio));
+	ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));
+	ut_asserteq_str("b4: input: 0 [ ]", buf);
 
 	/* Check the 'a' bank also */
 	ut_assertok(gpio_lookup_name("a15", &dev, &offset, &gpio));
@@ -96,6 +95,18 @@ static int dm_test_gpio(struct dm_test_state *dms)
 	ut_asserteq_str("a", name);
 	ut_asserteq(20, offset_count);
 
+	return 0;
+}
+DM_TEST(dm_test_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test that sandbox anonymous GPIOs work correctly */
+static int dm_test_gpio_anon(struct dm_test_state *dms)
+{
+	unsigned int offset, gpio;
+	struct udevice *dev;
+	const char *name;
+	int offset_count;
+
 	/* And the anonymous bank */
 	ut_assertok(gpio_lookup_name("14", &dev, &offset, &gpio));
 	ut_asserteq_str(dev->name, "gpio_sandbox");
@@ -108,4 +119,4 @@ static int dm_test_gpio(struct dm_test_state *dms)
 
 	return 0;
 }
-DM_TEST(dm_test_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+DM_TEST(dm_test_gpio_anon, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
-- 
2.1.0.rc2.206.gedb03e5



More information about the U-Boot mailing list