[U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena

[Fabio Estevam]

On Sat, Oct 11, 2014 at 11:21 AM, Sean Cross <xobs at kosagi.com> wrote:

>> Ok, understood. Just curious: which Ethernet PHY is used on the novena board?
> It's the same Micrel PHY used on the Sabrelite, the KSZ9021.

nitrogen/sabrelite holds Ethernet PHY reset low for 10ms, which is in
accordance with ksz9021 datasheet.

Shouldn't we wait 10ms here as well?