[U-Boot] [PATCH V7] ARM: mx6: Add support for Kosagi Novena

[Marek Vasut]

On Saturday, October 11, 2014 at 11:04:58 PM, Fabio Estevam wrote:
> On Sat, Oct 11, 2014 at 11:21 AM, Sean Cross <xobs at kosagi.com> wrote:
> >> Ok, understood. Just curious: which Ethernet PHY is used on the novena
> >> board?
> > 
> > It's the same Micrel PHY used on the Sabrelite, the KSZ9021.
> 
> nitrogen/sabrelite holds Ethernet PHY reset low for 10ms, which is in
> accordance with ksz9021 datasheet.
> 
> Shouldn't we wait 10ms here as well?

I checked the novena_spl.c and we do wait in novena_spl_setup_iomux_enet().
Is this what you have in mind ?

Best regards,
Marek Vasut