[U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables

[Tom Warren]

Albert,

I did a Makeall -s tegra before sending the PR (as I always do), and I saw no failures. But I haven't rebased against ARM master in a few weeks.

I think the Jetson TK1 change is still valid and should go in.

Thanks,

Tom

> -----Original Message-----
> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
> Sent: Wednesday, October 15, 2014 8:40 AM
> To: Stephen Warren
> Cc: Tom Warren; u-boot at lists.denx.de; Simon Glass; Tom Rini; Stephen
> Warren; Thierry Reding
> Subject: Re: [U-Boot] [PATCH] ARM: tegra: add PCIe-related pins to the
> Jetson TK1 pinmux tables
> 
> Hi Stephen,
> 
> On Wed, 15 Oct 2014 09:34:49 -0600, Stephen Warren
> <swarren at wwwdotorg.org> wrote:
> 
> > On 10/15/2014 05:43 AM, Albert ARIBAUD wrote:
> > > Hi Tom,
> > >
> > > On Tue, 14 Oct 2014 23:14:24 +0000, Tom Warren <TWarren at nvidia.com>
> > > wrote:
> > >
> > >> Albert,
> > >>
> > >> Please pull u-boot-tegra/master into ARM/master. Thanks!
> > >>
> > >> The following changes since commit
> a7f99bf139b3aaa0d5494693fd0395084355e41a:
> > >>
> > >>    arm: Fix _start for CONFIG_SYS_DV_NOR_BOOT_CFG (2014-09-11
> > >> 18:04:39 +0200)
> > >>
> > >> are available in the git repository at:
> > >>
> > >>    git://git.denx.de/u-boot-tegra.git master
> > >>
> > >> for you to fetch changes up to
> 90a565acf3a18c61170ec0e0b2046c98cb7ecc85:
> > >>
> > >>    arm: tegra: initial support for apalis t30 (2014-09-17 11:15:04
> > >> -0700)
> > >>
> > >> ----------------------------------------------------------------
> > >> Marcel Ziswiler (1):
> > >>        arm: tegra: initial support for apalis t30
> > >>
> > >> Stephen Warren (1):
> > >>        ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux
> > >> tables
> > >
> > > This new board fails when I merge this branch to u-boot-arm/master,
> > > with the following diagnostics:
> > >
> > > include/configs/apalis_t30.h:17:0: warning: "CONFIG_OF_SEPARATE"
> > > redefined [enabled by default]
> > > In file included
> > > from /home/albert.u.boot/src/u-boot-arm/include/linux/kconfig.h:4:0,
> > >                   from <command-line>:0:
> > > include/generated/autoconf.h:8:0: note: this is the location of the
> > > previous definition
> > >
> > > (actually, there is a lot of these, for various config options)
> > >
> > > Device Tree Source is not correctly specified.
> > > Please define 'CONFIG_DEFAULT_DEVICE_TREE'
> > > or build with 'DEVICE_TREE=<device_tree>' argument
> > >
> > > (This one is fatal even though it does not explicitly state
> > > "error:")
> > >
> > > This failure does not happen on the tegra branch; it is obviously
> > > due to the Kbuild stuff.
> >
> > This issue should be fixed by:
> >
> > https://patchwork.ozlabs.org/patch/398793/
> > [U-Boot] tegra: apalis_t30: master revamp
> >
> > However, I would assert that at this point during the release cycle,
> > we probably shouldn't be adding new boards/features, but just fixing bugs.
> > Perhaps we should drop the Apalis patch completely and re-apply it
> > once the release is out?
> 
> Ok. Should I still apply the TK1 pinmux patch, or should I consider the whole
> PR to be for -next?
> 
> Amicalement,
> --
> Albert.
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------