[U-Boot] [PATCH v2 5/5] sunxi: Enable second sdcard slot found on some boards

[Hans de Goede]

Enable the second sdcard slot found on some boards. Note that we do not
set CONFIG_MMC_SUNXI_SLOT_EXTRA for the SPL, as having it there is not useful,

Except for on the Mele-M3 where the second sdcard is an eMMC, from which the
device can also boot, and there we want to have both in the SPL, so that
a single u-boot binary can both from both. So for the M3 we do prefix the
defconfig setting with the special "+S:" syntax so that it applies to the
SPL too.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 configs/A10s-OLinuXino-M_defconfig    | 3 +++
 configs/A20-OLinuXino_MICRO_defconfig | 3 +++
 configs/Mele_M3_defconfig             | 2 ++
 3 files changed, 8 insertions(+)

diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index a578c06..2aad834 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -1,5 +1,8 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
 CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=1
++S:CONFIG_MMC0_CD_PIN="PG1"
++S:CONFIG_MMC1_CD_PIN="PG13"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN5I=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 20a947c..0e0a7de 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -1,5 +1,8 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
++S:CONFIG_MMC0_CD_PIN="PH1"
++S:CONFIG_MMC3_CD_PIN="PH11"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN7I=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 645b236..a043ad2 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -1,5 +1,7 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-m3.dtb"
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++S:CONFIG_MMC0_CD_PIN="PH1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN7I=y
-- 
2.1.0