[U-Boot] [PATCH 1/3] arm: mx6: cm_fx6: change issd gpio order

[Nikita Kiryanov]

Change the order in which GPIOs are toggled in SATA init sequence to
accomodate both SanDisk and Phison SSDs.

Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Stefano Babic <sbabic at denx.de>
---
 board/compulab/cm_fx6/cm_fx6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 82681b1..0206ae8 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -31,12 +31,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_DWC_AHSATA
 static int cm_fx6_issd_gpios[] = {
 	/* The order of the GPIOs in the array is important! */
+	CM_FX6_SATA_LDO_EN,
 	CM_FX6_SATA_PHY_SLP,
 	CM_FX6_SATA_NRSTDLY,
 	CM_FX6_SATA_PWREN,
 	CM_FX6_SATA_NSTANDBY1,
 	CM_FX6_SATA_NSTANDBY2,
-	CM_FX6_SATA_LDO_EN,
 };
 
 static void cm_fx6_sata_power(int on)
-- 
1.9.1